KTAG clone!

[Marmes]

I heard that Ktag clone is already for sale.
Does anyone know about it?
I would like to get one!

[VRPerformance]

are you sure that K-tag is cloned?

[Marmes]

It is!
it comes from poland
That I know!

[electrix]

I'm from Poland but I've never seen anybody sales clone of KTAG at our polish forums or auctions.

[thomas76]

Send the link :trytofly:

[Marmes]

It's a private sale, so there is no link.
But I already asked the guy to get me one.
I want to see if it's true!

[peregrine]

Price? If KTAG gas been cloned has Kess V2 been clones as well?

[motorsportsz]

I heard kess v2 has been cloned

[powertdi]

good job if its true!!!!!!!!!!!!!!

[maglaras]

FG GALLETTO 2 MASTER IS THE SAME THAT KTAG
show the list of car bus and truck

[Overtune]

Ktag already on the chinese market...Anyone tested???

[ahadi]

:wink:

here is link
(http://www.obd2tool.co.uk/wholesale/ktag-k-tag-ecu-programming-tool-1801.html#.UGQ3dbTKQPQ.twitter)

[macxlulu666]

yes is possilble in poland -trasdata - dimsport or
k-tag -allientech

[gcesare21]

yes is possilble in poland -trasdata - dimsport or
k-tag -allientech

some indication of where to buy?:(

[jmush303]

Hi
Does anyone try on latest ecu like alfa fiat lancia MJ8D 1.3MJET?
i have a lot of this ecu to do
Thks

[konopel]

Here is the linkKtag K-TAG ECU Programming Tool more stronger than FGTECH (http://www.allobd2.com/wholesale/ktag-k-tag-ecu-programming-tool.html)

[tatop]

Here is the linkKtag K-TAG ECU Programming Tool more stronger than FGTECH (http://www.allobd2.com/wholesale/ktag-k-tag-ecu-programming-tool.html)

now the technique of Chinese vendors and 'always the same ...
lands when they throw the price of an instrument do not worry that it is going to release another new and better cloned

hehehehehhehe

:wink:

[tatop]

software that uses this "new" ktag??
anyone who has already bought and post it here
thanks

[Marmes]

It's important to state that Ktag is a workbench tool.
So no OBD2 functions. you cannot read/write your car directly.
So it's good for tricore and nexus jtag.
The rest is all covered by piasini and galletto 2.

[Overtune]

I got answer from a chinsese seller that only SLAVE tool is available. Watch out for websites claiming to sell MASTER versions. This is a lie...

[obnchip]

KTAG K-TAG ECU Programming Tool ECU Prog Tool Master Version-OBDAUTO---BMW OPS VAG-COM,Tacho Universal,KWP2000,BMW Scanner,BMW Carsoft,ELM323,Code Reader,Can-bus (http://www.obdbox.com/views.asp?hw_id=1981#)

[chucky69]

I got answer from a chinsese seller that only SLAVE tool is available. Watch out for websites claiming to sell MASTER versions. This is a lie...

It is master, trust me :)

[Mulatre]

It is master, trust me :)

Have you tried one?

[jnoroeste]

Hi M8's

These shit it's not a ktag interface, it's just a Galleto2 clone again.

Regards.

[mbtun]

it does not use galetto 2 sw for sure :)

[Artilect]

Anybody tested this device?

Please report.

BR

[arokon]

Have a look:

http://www.obdbox.com/download/K-TAGvido.rar

[moky]

I see V1.89 on video,someone know official version actually?

Thx

[moky]

Just see on alentech website 1.89 is lastest version.

[arokon]

k-tag is a must-have for a tuner. If it is well made (cloned), then it's the real deal...

[moky]

k-tag is a must-have for a tuner. If it is well made (cloned), then it's the real deal...


if it work at 100% yes ....:D

[arokon]

if it work at 100% yes ....:D

genuine tools are not working 100%...so don't think this clone will ;)

[toyoman]

where can I find the Clone software?

[mbtun]

will be shipped with the tool

[toyoman]

I wanted to see before you decide to buy it :-P

[bmw320d]

I have bought it, I must try monday on marelli 8DF 1.3mj

[mimmo2011]

I have bought it, I must try monday on marelli 8DF 1.3mj
you can share the software?

[jmush303]

Hi
I have it
I have tested with bosch edc16c34 psa ecu perfect
And vag siemens ppd1.2 perfect
And with original software updated
For now ktag work same as original
I want to test with edc17 and other interesting ecu for see.
I post the result when i have
Bye

[konopel]

Hi
I have it
I have tested with bosch edc16c34 psa ecu perfect
And vag siemens ppd1.2 perfect
And with original software updated
For now ktag work same as original
I want to test with edc17 and other interesting ecu for see.
I post the result when i have
Bye

Did you update your klone with the original software? They strictly forbid to do it. How should it be understood?

[jmush303]

No i already have kess v2
its same software
im sure if protocols are updated in interface that create problem
but for now working perfect

[konopel]

No i already have kess v2
its same software
im sure if protocols are updated in interface that create problem
but for now working perfect

Did you use software from Kess v2 and a clone K-Tag?

[moky]

Hi
I have it
I have tested with bosch edc16c34 psa ecu perfect
And vag siemens ppd1.2 perfect
And with original software updated
For now ktag work same as original
I want to test with edc17 and other interesting ecu for see.
I post the result when i have
Bye



could you upload us software of clone please?

Thx

[jmush303]

Tomorow i post the software
No problem

[2200]

yes software please :-)

[xandaschurras]

No i already have kess v2
its same software
im sure if protocols are updated in interface that create problem
but for now working perfect

Hi mate

Can it say to me where you have bought it?

It?s slave or master?

Regards

[moky]

with clone chinese,slave are unutilisable..chinese is not a master :D (hello all chinese here who take member's infos for their buziness ..)

XucX

[jmush303]

Hi
i cant post software its size is too big more than 200Mb
Its master tool not slave
I go to test it on a nissan navara denso ecu in 3 days
I post result

[slave]

Hi
i cant post software its size is too big more than 200Mb
Its master tool not slave
I go to test it on a nissan navara denso ecu in 3 days
I post result
uses mediafire, hotfile

[mexanico1971]

here you have ! you can split the file as many part"s as you want !

BR

[bmw320d]

ktag tested on edc17c46 vag read/write ok, edc17 dde7 bmw read/write ok, marelli M8DF read and write ok
My ktag is master

[masterb]

ktag tested on edc17c46 vag read/write ok, edc17 dde7 bmw read/write ok, marelli M8DF read and write ok
My ktag is master

Hi,
Did you test only ecu...
Or make real test with car.
So car start after write a tunefile;-)
That mean cks is ok!

Br

[bmw320d]

Hi,
Did you test only ecu...
Or make real test with car.
So car start after write a tunefile;-)
That mean cks is ok!

Br


tested on ecu the ktag work only in ecu not obd, and the car work with dump tuned, the cheksum is ok

tested also on edc17 of new 1.3 cdti opel corsa the car run and work ok

[masterb]

That no obd is clear
Ok so interface work :-)

[jmush303]

Hi
this is link for ktag
Pass in PM
Dont forget to click thks
Bye

DepositFiles (http://depositfiles.com/files/tex1nuuru)

[powertdi]

jmush303 You have full PM box. No need keep pass by PM.
This sw in stock of sale with tool. And you make BETTER for you reputation if share it Here. My opinion.
P.s. If not send it to me plz.
BR,Aleksei.

[slave]

Hi
this is link for ktag
Pass in PM
Dont forget to click thks
Bye

DepositFiles (http://depositfiles.com/files/tex1nuuru)
You have full messaging

[jmush303]

Software with ktag
Pass: mush303

Dont forget to click thks

Bye

[cp2010]

jmush303 You have full PM box. No need keep pass by PM.
This sw in stock of sale with tool. And you make BETTER for you reputation if share it Here. My opinion.
P.s. If not send it to me plz.
BR,Aleksei.

if clone interface working as original you can download from this site:
Alientech - Software Download (http://www.alientech-to.it/en/dowload-mainmenu-58/software-mainmenu-43)

[moky]

Visibly,same soft as original

[kptuning]

So, where do i get a good clone, and what price will it have?

[xandaschurras]

Can someone say where it is possible to buy a good Ktag clone?
Thank you very much, regards

[jr2185]

Hi,
Did you test only ecu...
Or make real test with car.
So car start after write a tunefile;-)
That mean cks is ok!

Br

You do know that the k-tag doesn't calculate checksums, don't you? Or maybe thats not what you meant.


Can someone say where it is possible to buy a good Ktag clone?
Thank you very much, regards

post #12 has the link

[masterb]

You do know that the k-tag doesn't calculate checksums, don't you? Or maybe thats not what you meant.


k-tag don't make cks? :(
no i though the ktag software make cks befor writing to ecu
with wich tool did you make cks ?

[jr2185]

k-tag don't make cks? :(
no i though the ktag software make cks befor writing to ecu
with wich tool did you make cks ?

I guess I never tested it but we have genuine k-tag and I have never found any information saying it does cks. You need to do that with the tuning software. I also use Galletto 2 which does cks.

[xandaschurras]

:wink:

here is link
(http://www.obd2tool.co.uk/wholesale/ktag-k-tag-ecu-programming-tool-1801.html#.UGQ3dbTKQPQ.twitter)

Is it this good clone?
Do I buy someone it with another site?
Regards

[arokon]

wait 1-2 months and it will cost half price like the galletto 2 ;)

[jovime]

I have original K-TAG and it does calculate all checksumms. 100% sure.

[jmush303]

Today i have make bmw 530d edc16c31 without problem
Perfect

[theghost]

a friend of my bought a chines ktag and it seems it is a slave

can this be?

[bmw320d]

can be, the interface ktag ther's master and slave, I have the version master, the dump read can to be open without decrypt it

[Metin]

someone can share picture pcb from china ktag
what quality box

[Fantomisback]

whether anyone has documents pinout for K-TAG? for cars,trucks........? like on galletto 2?


Thanks

[kfprint]

whether anyone has documents pinout for K-TAG? for cars,trucks........? like on galletto 2?


Thanks

in my original, its in the software, you need to download the help files

[jmush303]

Pcb is covered by epoxy
You cant see the components
Sorry

[will4u69]

Does anybody know if they are doing the adapters to go on the frame and if so where???
thanks

[konopel]

I wrote to them about adapters. They answered that they did not do them and advised to use original from Alientech.

[moky]

whether anyone has documents pinout for K-TAG? for cars,trucks........? like on galletto 2?


Thanks



in 1 hour



.

[moky]

I will upload all doc

[moky]

Here all doc for Ktag

https://rapidshare.com/files/1426577376/help.rar

Thanks are welcome !






.

[masa-mdq]

you can post clone software link ??

[moky]

soft here,jmush post it before,read please...


http://www.digital-kaos.co.uk/forums/f173/ktag-clone-284004/index4.html






.

[theghost]

deleted (http://www.digital-kaos.co.uk/forums/search.php?searchid=4297067) -> post was an mistake sorry

[moky]

Where did you see trasdata plz ?










.

[jmush303]

Hi
Does someone has tested on DCM mercedes?
Because i have that ecu to do
I dont know this ecu number
Maybe someone can help me

Thks

[mihaiservice]

hi
on DCM 3,5 can read only part of flash via obd
for full BDM you need transdata

[bmw320d]

anyone tested EDC17 or other interstig ECU's?
i also saw in inet that there is a trasdata clone

anyone has tried the trasdata clone?

tested on edc17 bmw vag and opel, read and write without problem

[jr2185]

So would there be anyway to read the clone tool and use it to unlock all protocols on original tool? I'm not sure if I'd want to, I'm just wondering if it would work.

[masa-mdq]

soft here,jmush post it before,read please...


http://www.digital-kaos.co.uk/forums/f173/ktag-clone-284004/index4.html






.

Link is dead !! You can post another link ?
Thanks

[moky]

here software delivered with chinese clone

https://rapidshare.com/files/4055822463/kt.rar

[T72]

interesting, will Kess2 be cloned? Just must decide, pay anual fee or not....

shit cloners..........

[tehnosoftex]

interesting, will Kess2 be cloned? Just must decide, pay anual fee or not....

shit cloners..........
May be already cloned
http://www.digital-kaos.co.uk/forums/f155/interface-picture-collection-62956/index26.html

[jovime]

Nice! I'll have more work recovering ECUs :D

[masterb]

anyone test the ktag from chine, or other sorce ?
work great, or more luck to get a good job ?



br
pe

[bondiblu]

I've ordered one, so hopefully I'll have some input soon.

[Youneselm]

i have one, it works great!!!!

[masterb]

you own a china clone ... and work without problems ?

[Youneselm]

yes mate did 2 sid801 via wirringplug and 2 edc16 via bdm. no problems YET. ;-)

supplier is ecutool!!!

[dragger]

everyone writed here and tested the common ecus
is anyone tested the different one? Forexample on MPC55xx or TC1797 Sid807evo?

[Maartinj]

Guys.
DId anybody test K-tag with MPC55xx ?
My one doesnt work, ECU is working, but I am not able to read.
Perhaps connection drawing is wrong ?


http://img811.imageshack.us/img811/8909/mpc5554.jpg (http://imageshack.us/photo/my-images/811/mpc5554.jpg/)

[dragger]

Guys.
DId anybody test K-tag with MPC55xx ?
My one doesnt work, ECU is working, but I am not able to read.
Perhaps connection drawing is wrong ?


http://img811.imageshack.us/img811/8909/mpc5554.jpg (http://imageshack.us/photo/my-images/811/mpc5554.jpg/)

I have do an ecu same trw ems2, with original ktag. it is working well but didn't have a clone ktag, if i have i can try

as i remember there is a other connection must be under the photo.

[elecautocr]

Hi:

So, Ktag correct checksumm when write ?? or Did you correct it with tuning software ??

Thanks


tested on ecu the ktag work only in ecu not obd, and the car work with dump tuned, the cheksum is ok

tested also on edc17 of new 1.3 cdti opel corsa the car run and work ok

[bmw320d]

Hi:

So, Ktag correct checksumm when write ?? or Did you correct it with tuning software ??

Thanks


ktag correct the chk when write

[mechanior]

new K-TAG master firmware 1.89 5.001, quality a+
edc16-17, denso, marelli, delphi, siemens, hitachi...

info jedrszczak@gmail.com

[bondiblu]

EDC16C34 Peugeot 307 HDI tested today,

read/write all good

[powertdi]

Hi
Does someone has tested on DCM mercedes?
Because i have that ecu to do
I dont know this ecu number
Maybe someone can help me

Thks
Yes work fine.

[rrguillaume]

hello, Is there a 100% Ktag europe? and work 100%? thanks you

[moky]

Please,if work fine,say us where you buy it .

Thx

[Anmed]

Yes, yes, what the results will be clone, if the original is not working?
Tell me more, which tool is able to work with EDC17C54-3.39 VW Crafter? I have close to their nest ...

[dieseltechnika]

Am I curious the Chienise clone has counter of run off ?

[Maartinj]

I bought one, couldnt do Scania Motorla S6 ECU. Sending it back. Extremally poor customer service. I was ask for PINOUT thinking that connections wire have problem / wrong, and they send me video how to install software. Video how to click EXE file and follow next next next ...... O.M.F.G

[dieseltechnika]

This is Chienise sevice. My last order: IDS, 10 pcs VCDS, Proxia and Galletto.

IDS finally works, huge problem with run it, no manual. I found solution here on DK. Thanks.

10 pcs VCDS in all of them FTDI is programmed bad, wrong PID

Galletto V2 k-line and most CAN by OBD doesn't work

Like you said O.M.F.G

But on the other hand I shouldn't be upset and complain, because I paid for Chiense products small money so I get the same back. Simple rulse.

Last thing. After a few orders in China I really appreciate my original tool :). Nobody understand it untill has decided to buy even one original thing and check the service. From the time I have original K-TAG or KessV2 when I do something with the car I've never thouht the problem is on the device site. With Chiense products when you have problem you always think it is device, and you right :)

[alpha-music]

it is simple.. clones are allways cheap and no support but i dont unterstand why people who buy clones.

normaly clone buyer are no professionals because they dont have to earn money with the tools... so normaly this guys have no experience..

it is simple.. we have more then xx dealers and for them we give support and tell them how to work.
And price for them in orginal KTAG is 1200 EUR...

so why people buy an ktag clone for half price and then have problems.. no support and normaly no experience when they read such car how to make an good working file..

KATG is not expensive so i dont understand such clone..

[jaca4591]

it is simple.. clones are allways cheap and no support but i dont unterstand why people who buy clones.

normaly clone buyer are no professionals because they dont have to earn money with the tools... so normaly this guys have no experience..

it is simple.. we have more then xx dealers and for them we give support and tell them how to work.
And price for them in orginal KTAG is 1200 EUR...

so why people buy an ktag clone for half price and then have problems.. no support and normaly no experience when they read such car how to make an good working file..

KATG is not expensive so i dont understand such clone..

K-Tag full is 3500 EUR
But after all, does not favor the Chinese fakes.

[gedas8899]

Hello somebody tested trasdata clone and if trustible this web site
Hardware, software for programming ecu and chip tunning car (http://car-prog.com/)

[jmush303]

Hi
i have tested today on sid807 peugeot and dont work
Does anybody has tested on this ecu?
New update is available with 1.90 version
Does she lock clone or not?
I have the latest version but for my kess v2 original
Thks

[eprommazza]

Hi
i have tested today on sid807 peugeot and dont work
Does anybody has tested on this ecu?
New update is available with 1.90 version
Does she lock clone or not?
I have the latest version but for my kess v2 original
Thks

do not
this and a picture if you feel
that s what is going to happen

[Plowman]

Hello somebody tested trasdata clone and if trustible this web site
Hardware, software for programming ecu and chip tunning car (http://car-prog.com/)

Not sure how good this clone is, but please be aware that (unlike KTag) Trasdata does not correct checksums as it is designed to run in conjunction with RACE editing SW ;)

[jmush303]

do not
this and a picture if you feel
that s what is going to happen

Yes but its 1.89 version
Mine with original software of my kess work perfect
But maybe update erase data of clone like on your picture
Could you restore clone interface after?
Thks

[alpha-music]

we testet three clones from china and all working with 1.90
sometimes problem on FW update... try again and work

[eprommazza]

Yes but its 1.89 version
Mine with original software of my kess work perfect
But maybe update erase data of clone like on your picture
Could you restore clone interface after?
Thks

This image is after i have download 1.90
can t reprogramming it only need to resend in china

best regards

[eprommazza]

we testet three clones from china and all working with 1.90
sometimes problem on FW update... try again and work

i have try update and received corrupted
i don t know how your clone work again
strange.
maybe want do more stop clone
maybe have the original
and him wants that break

best regards

[alpha-music]

you dont need to send... only update again and it will work

[eprommazza]

you dont need to send... only update again and it will work

when serial is L00000000 can t do nothing ...
software open and can only see info..
all is closed ..
interface is disconnected
can explane better how you do it?

[dieseltechnika]

when serial is L00000000 can t do nothing ...
software open and can only see info..
all is closed ..
interface is disconnected
can explane better how you do it?


What is more, no update possible for clone, so reset the counter is impossible too :D

[eprommazza]

What is more, no update possible for clone, so reset the counter is impossible too :D

Impossible is a big word:)
interface only need reflash and work again!!
counter ? I do not know what you're talking about counter..
who made 1.89 can easily do also 1.90: D

[moky]

be careful Alientech make war to clone (see her website,there is an article about clone :D) so they are surely here ....

[eprommazza]

be careful Alientech make war to clone (see her website,there is an article about clone :D) so they are surely here ....

the web is full can start ... but it's a losing battle as it has been a while for all these companies

[Mulatre]

Hello somebody tested trasdata clone and if trustible this web site
Hardware, software for programming ecu and chip tunning car (http://car-prog.com/)

They have TrasData old clone for sale, but it's not New TrasData.

New TrasData support JTAG and Nexus MPC55xx. Old one don't.

So, you can't compare Old TrasData clone with K-Tag clone. :dancing:

[mechanior]

i have k-tag clon 'master version', instaling software and driver 5 computers all xp service pack2 netframe work 3.5(2 laptop 3 pc)
- one laptop ktag work 100% master and slave checksum perfect read write all ok(check edc16,17,denso),
- 4 computers slave ok, master not work not calk checksum( kessv2 error checksum), crypted file
why?, I dont now
heeeeelllppp

[unar]

Is somebody succesfully updated his ktag clone from 1.89 to 1.90.

My clone not read good flash, I have tried on sid803a and sid206.
every read flash it is different dumps.
in case of eeprom and full backup it is ok, every read file is the same.
Can I do something wrong, can i get out eeprom and flash from full backup file?

BR
unar

[dieseltechnika]

Impossible is a big word:)
interface only need reflash and work again!!
counter ? I do not know what you're talking about counter..
who made 1.89 can easily do also 1.90: D

There is a counter :), I am sure of it. Will be one day when every K-Tag die after update, like with carprog.

[Gargamello]

k-tag clone bad reads edc17 ,
personally checked

[eprommazza]

There is a counter :), I am sure of it. Will be one day when every K-Tag die after update, like with carprog.

1.89 do not you should upgrade and it works well it is advised..lol

[moky]

So,this clone is not a good choice visibly..?

users,please report ecu you did and problems...!


Many thx !





.

[Kai]

Has anyone got a dump to reset the tool if it gets locked or to reset the counter?

[moky]

There is a counter :), I am sure of it. Will be one day when every K-Tag die after update, like with carprog.


you were right,visibly,ktag lock after time....


infos of users ?

[atomiczen]

Has anyone got a dump to reset the tool if it gets locked or to reset the counter?
interested too

[GTTURBO2540]

Hello please someone have the connections to read this tricore
SAK-TC1797-384F150E, ecu continental S180129101E, the car is peugeot boxer year 2012 2.2hdi 130hp , many tanks

[jmush303]

Does its sid807?
If yes you cant read with version 1.89 i have tested

Envoy? depuis mon GT-N7100 avec Tapatalk

[alfons37]

I think buy bdm prog, galetto 2 VS ktag, what is best :) today?

[GTTURBO2540]

NO the ecu isnt sid807, is sid208, i have fgtech clone, i need the connections for read by boot mode, many tanks

[Plowman]

SID208 can't be done yet

[jaxone]

My friend bought one and he tested ME 7.5 and ME 7.5.10 , he said works perfectly.
He did not tried to update software.

[bondiblu]

Renault Traffic 2.0 DCI 115HP, Bosch EDC16+C36 read/write ok.

[wiski]

Any problems read/ write pcr 2.1 ?

[Plowman]

Any problems read/ write pcr 2.1 ?

Can't be done by KTag

[wiski]

How about MB dcm 3.5 ( there was positive answer in earlier posts for 2.1 ) ?

[Plowman]

How about MB dcm 3.5 ( there was positive answer in earlier posts for 2.1 ) ?

Shouldn't be an issue with DCM 3.5.

I don't see how there can be a posititive answer on PCR 2.1 because K Tag can't do them, you need KESS V2.

[bondiblu]

Today I test EDC16C9 R/W ok and VW T5 EDC17CP20 boot R/W ok :)

[theghost]

deleted (http://www.digital-kaos.co.uk/forums/search.php?searchid=4297067) -> post was an mistake sorry

[Plowman]

hi

i tested a CP20:

backup ok
EEPROM OK

#but flash stops at 99 % and gives error "checksum incorrect" -> what can it be?

http://www.digital-kaos.co.uk/forums/f171/ktag-clone-kessv2-checksum-error-309459/

This?

[jmush303]

Hi
Yesterday tested ok on edc17cp20 transporter 2012 2.0 TDI 140 and edc17c46 tiguan 2.0 TDI 140
Read full backup on each ok
Read and write flash on each with checksum corrected by interface
All work like original

[leolux]

what for clone you have perhaps any link or gves it differec on the clones from kess?

[sery22]

hello guys, today connecting my ktag clone, I found a screen telling me that remain after 9 programming and i must update. this happened to anyone? how can you fix it? thanks

[soplillo]

Hi mate, you have updated your tool o or maybe you have hactivated the internet conection on k-suite???

[sery22]

hi , i no have update, and no connection internet

[soplillo]

I don't know what's going on.

Without connection internet???

[moky]

There is a counter ,after few time must update but perhaps someone have solution for that

[moky]

http://www.digital-kaos.co.uk/forums/f173/ktag-pictures-experiences-323066/index2.html

[tagar]

Here all doc for Ktag

https://rapidshare.com/files/1426577376/help.rar

Thanks are welcome !






.


File not found. can you please re up?

[jmush303]

Hi
Today i have remove the sd card not readable on windows because its raw drive
So i take utility softwrae to make image of this raw drive
RAWDISKCOPY free
Image size 46 Mb
I start my ktag with 1.93 software but without sd card for look the difference
I see in info that the ktag info are same like the blocked ktag
I re-put the sd card and re open with 1.89 software and i see my ktag is blocked
Conclusion:
Its not on SDCARD
because i rewrite original image on sd card
Same problem i have to buy a new ktag
Maybe ftdi eeprom or upc or usb patch
Thks

[highline]

Little feedback. Did a Volvo EMS2 MPC5554 and Mercedes CRD2.61 read and written. The vehicles run without problems.
highline

[asso]

There is a counter ,after few time must update but perhaps someone have solution for that

replacement chip ktag

[mitch2]

hi everyone!!
my ktag read good and write with bootloader tricore and ST10FXXX.
but by BDM MPC55X i cant do anything.
ksuite show me :"hardware configuration not supported :send Log files to the provider".
see picture ....
any ideas????

[dieseltechnika]

Hi
Today i have remove the sd card not readable on windows because its raw drive
So i take utility softwrae to make image of this raw drive
RAWDISKCOPY free
Image size 46 Mb
I start my ktag with 1.93 software but without sd card for look the difference
I see in info that the ktag info are same like the blocked ktag
I re-put the sd card and re open with 1.89 software and i see my ktag is blocked
Conclusion:
Its not on SDCARD
because i rewrite original image on sd card
Same problem i have to buy a new ktag
Maybe ftdi eeprom or upc or usb patch
Thks

It always the same with Chiense device. You think about buy second K-Tag, so you think about spend again about 600 usd. Together it will be 1200 usd. So almost it is 1000 e. This is the money you have to spend on original device but without protocols. So you still want to use clone, and now you have both which will be locked or are locked. You don't want to spend money on next K-Tag again so you decidied to find someone who will unlock it or sell you dump, you will spend 500-1000 usd for the solution which you would like to sell later with small profit to reduce your cost :), and after all you will spend 2000 usd for get clone device which is full but you can't update it, you don't have warrenty, no support, and 100% sure with all what you do, everytime there is a risk you will broke something. In my opinion what is the worst you spend your time to figure it out how make it work and you don't make money on it.

Look for 2000 usd you can buy original, 24 months warrenty,, 12 months subscription, support and protocols for BDM Motorola and JTAG Renesans, most useful compilaton for now. In future you can develop your device with new solution and protocols.

The last thing is that I was the person who thought in same way. One day I decidied to buy original tool. It was KessV2, then K-Tag, it was one of the best decision in my life, no more problem with device, during 3 years (KessV2) works perfect, K-Tag works perfect too.

[2200]

It always the same with Chiense device. You think about buy second K-Tag, so you think about spend again about 600 usd. Together it will be 1200 usd. So almost it is 1000 e. This is the money you have to spend on original device but without protocols. So you still want to use clone, and now you have both which will be locked or are locked. You don't want to spend money on next K-Tag again so you decidied to find someone who will unlock it or sell you dump, you will spend 500-1000 usd for the solution which you would like to sell later with small profit to reduce your cost :), and after all you will spend 2000 usd for get clone device which is full but you can't update it, you don't have warrenty, no support, and 100% sure with all what you do, everytime there is a risk you will broke something. In my opinion what is the worst you spend your time to figure it out how make it work and you don't make money on it.

Look for 2000 usd you can buy original, 24 months warrenty,, 12 months subscription, support and protocols for BDM Motorola and JTAG Renesans, most useful compilaton for now. In future you can develop your device with new solution and protocols.

The last thing is that I was the person who thought in same way. One day I decidied to buy original tool. It was KessV2, then K-Tag, it was one of the best decision in my life, no more problem with device, during 3 years (KessV2) works perfect, K-Tag works perfect too.

100% same thinking

[jmush303]

Its done i have buy ktag master used with all protocols activated
Its perfect now
So does someone has read sid807 psa i have read on forum cpu temp is a problem when reading?
Thks

[dvdegrt]

Me read crafter edc 16 bdm vith it has read eeprom ok procesor file ok flash think read only one part
then read vith galleto eu clone and was ok all read complete files and after ecu vas dead 3pcs transistor
vhere burned ordered new but me sure that k tag ****ed up cause vith galleto made 2 before and no
trouble so advise not read any crafter and sprinter edc 16 vith it read before audi 2.0 edc 16 and all ok

[niwat_spp]

Now software not test by me. before open software don't forget turn off internet.KSuite.rar (http://www.mediafire.com/?1s38d4j75jvbfzx)

[psico]

any test this software ?

[mitch2]

bdm protocols not works for me

[cheester]

Mitch2 are you talking about BDM MPC55X Ford/Jaguar only or you have tried read other ones also?
Try to press read without connection, will you get the same error: ''hardware configuration not supported''?

[psico]

Any test med17.5 vw ??

Read and write ?

[moky]

Others persons have problem locked hardware? problem is internet connection or counter Inside hw ?

[theghost]

deleted (http://www.digital-kaos.co.uk/forums/search.php?searchid=4297067) -> post was an mistake sorry

[moky]

Wich ecu ? edit sorry : edc17cp20..

[blacktoy]

deleted -> post was an error

[soxten]

hi everyone!!
my ktag read good and write with bootloader tricore and ST10FXXX.
but by BDM MPC55X i cant do anything.
ksuite show me :"hardware configuration not supported :send Log files to the provider".
see picture ....
any ideas????


check you'r connection!
the pin is not connecting to the motherboard.
I hade this problem yesterday on a edc16c34

[jmush303]

Problem is internet connection that flash processor and erase his memory
Change cpu is solution for now

[mitch2]

Is not the problem in my case because i try with edc16+VAG,delphi,and siemens sid803A and always get this error.

Cheester, if i try without connecting ecu , get error "check connections and power connections"

other protocols works for me (boot st, boot mitsu,tricore )

[moky]

Jtag renesas work fine? only bdm don't work so.. Thanks

[mitch2]

Jtag renesas dont use yet .
When i use it i will tell here

[Plowman]

Jtag renesas work fine? only bdm don't work so.. Thanks
Renesas works fine

[mugatu]

someone could say hello as bdm ktag works, I have to make a ecu edc16c36 with mpc 564 and does not support any response BDM100 hope and greetings to all.

[Zohar]

Hi.

Jtag Renesas of K-tag is a big fake
Piasini is really better
You can read and write only ecus, which listed in Ktag.
If ECU not present in K-TAG list or if device can't recognize SW version of ECU - reading/writing is not possible (device will make only backup in special crypto format).
It not Jtag - it is deception, because I can't read/wrote any Renesas SH70xx processors from different ECUs.


BR

[Nio]

Hi guys. I did not understand if really ktag clone works or not. someone say work jtag, someone else say not work. Please give information about function ktag. If possible someone can post image so members can really see if work or not. Thank for your help. BR

[atomiczen]

could someone make a list of tested ecu?

[cheester]

Did VOLVO s40 2006 1.6d edc16+ working perfect.
Also bmw 530d 2005 edc16 no problems.

[eli49]

vw,audi,skoda,seat edc16bdm work good

[psico]

VW SIROCCO MED17 2.0 tfsi, galletto clone no read...no id.... and ktag read/write ok.

[atomiczen]

so renesas and bdm work ok...right?

[Plowman]

so renesas and bdm work ok...right?

Yes no problem

[mitch2]

Is posible to get fles backup from sd card inside ktag ?
i have from kess V2 clone and i want to know if are the same files ?
if some one has a copy from sd card of ktag please share here .

Some one had readed micro Lpc2478FBD208 ( ARM7 microcontroler) from ktag clone?
My ktag has 20 pin solder for programing like jtag programer

[atomiczen]

have you tested tricore bootmode also? work ok on edc17 and med17?

[turner]

From what I can see the ktag clone hardware is the same as Kess v2, the only thing missing is the OBD cable, can anyone give the pinout of the obd cable so that I can try it with kess software?

[mitch2]

Hardware is not the same .When you open ksuite with ktag connected protocols for kess aren't availables .however you can make your obd opening your ktag boot cable ( you can se what pin is can high ,can low, 12v ,vdd,kline, ....)
....and try

[atomiczen]

From what I can see the ktag clone hardware is the same as Kess v2, the only thing missing is the OBD cable, can anyone give the pinout of the obd cable so that I can try it with kess software?
i saw ori pcb and were completely different
software is the same, but hardware are different also on clone i think

[kogej]

I tested the Ktag on:
MINI MEV17.2 (TC1766) -read/write without any problems
Audi RS5 (2011)-MED17 with tuning protect -read/write without any problems

[atomiczen]

writing problem are known on Audi RS3-TTRS Bosch ME9.x BDM MPC with ori k-tag

[didi_du_93000]

writing problem are known on Audi RS3-TTRS Bosch ME9.x BDM MPC with ori k-tag

Really??
So it's better to use BDM PROGRAMMER in complementary of k-tag??

Anyone can confirm than BDM on k-tag is bad???

[mitch2]

Someone can get files from ktag sd card for me , my ktag had glue over sd card and remove glue the sd card is damage.

[mitch2]

Really??
So it's better to use BDM PROGRAMMER in complementary of k-tag??

Anyone can confirm than BDM on k-tag is bad???

For me before didnt work now works perfectly , when readind power supply down to 11,3 ,i change power supply and now works fine but i broke my sd card i need files inside ,must be has 4 hidden folders .
I need them.
ktag use various capacitors A106 ,i know that is 10uF, but what voltage 10V or 16V?

[atomiczen]

Really??
So it's better to use BDM PROGRAMMER in complementary of k-tag??

Anyone can confirm than BDM on k-tag is bad???
didi_du read what i have wrote....TTRS and RS3 ecu bosch me9.x have some bugs on 1.89 ori software
so there's for sure the same bug on chinese copy

other bdm function are ok on ori...i haven't told you all bdm protocol on ktag don't work

you will find problem on all bdm programmer with this ecu...seems the latest version of motorola mpc processor, with some parts writable and some other not writable. Problem is on checksum

[mitch2]

Today a get repair ktag but i cann?t get files for ktag sd card .
if i try to connect ktag without sd card,ksuite not recognize ktag.
i tried with files from kess sd card get here :http://www.digital-kaos.co.uk/forums/f173/kess-v2-clone-320889/index16.html
and ksuite recognize ktag but i havent active protocols .(see picture).
my serial is the same that i bought it and before broken.
someone CAN SHARE ktag CLONE sd card files will be much appreciated.
thanks

196237196238

[J_amb_o]

didi_du read what i have wrote....TTRS and RS3 ecu bosch me9.x have some bugs on 1.89 ori software
so there's for sure the same bug on chinese copy

other bdm function are ok on ori...i haven't told you all bdm protocol on ktag don't work

you will find problem on all bdm programmer with this ecu...seems the latest version of motorola mpc processor, with some parts writable and some other not writable. Problem is on checksum

Yes, checksum not the BDM hardware. Correct checksum first and then write. I use MagBDM original for these.

[mitch2]

There no body can pass me the folders from ktag clone sd card?...
No one?
please,,, i try with folders from kess v2 sd card and not works .

[andrius]

hello, i am trying to read med17.1 with ktag, but gett error "communication error: please check power and connections 0X100B" and will not identify ecu or comunicate with it. any ideas how to solve it? many thanks :)

[mitch2]

here more info about ktag clone but i dont know how use it .
196933


196932


sd card must be FAT format

[DPRing]

Hi
I'm doing tests on diferent ecu and I found a similar problem than any others described. KTAG works reading the backup file but when try to read the M58, a PSOP, or any other maps file it shows an error about checksum and the file seems corrupted.
Doing some tests with this corrupted file I found that it seems a crypted slave file, because it is compresed and password protected.

Does any one solve this problem ?
Do anyone know how do original Masters manage the backup files from his slaves ?

[mitch2]

you nedd install microsoft C++ library 2005 to fix that problem

[andrius]

yes it is FAT formated :) i have the image taken out of clone :)

[mitch2]

yes it is FAT formated :) i have the image taken out of clone :)

i need it backup !!!!, when i tried take out i broke sd card .
could you get for DK a backup image ?
please!!!!

[DPRing]

you nedd install microsoft C++ library 2005 to fix that problem

Ok, I'll try it

Thanks !

[leolux]

Hi Guys anyone test this new Design of K-Tag? i think all same just only looking like orginal

KTAG K-TAG ECU Programming Tool ECU Prog Tool Master Version [KT-2] - $299.99 : Nandtools, Auto Diagnostic Tools (http://www.nandtools.com/ktag-ktag-ecu-programming-tool-ecu-prog-tool-master-version-p-779.html)

[risalelettronic]

hello guys
I try backup of the sd card of ktag clone someone could kindly post it
thanks in advance

[risalelettronic]

i need it backup !!!!,
please!!

[risalelettronic]

I found them but this is not my problem
the program does not see the serial and the tools fw

[risalelettronic]

this is my problem with xp sp3 and 7 home 64bit

[didi_du_93000]

Ktag with SID201 FULL WORKING!!!

But small problem.

I have ECU SSID201 from Peugeot 607 2.7 HDI.

And Ksuite say me "Error It's a SID201 LAND ROVER, must selection it".

I have selectioned LAND ROVER and FULL WORKING.

[risalelettronic]

I said the same thing with a Jaguar SType 2.7 v6

[risalelettronic]

provable that the ECU and the engine to arrive by Landrover

[didi_du_93000]

provable that the ECU and the engine to arrive by Landrover


Yes i think same than you.

[rego88]

hello, anyone test the new ktag version???

[atomiczen]

hello, anyone test the new ktag version???
seems the same hardware, only with a useless colored box

[atomiczen]

so on ktag clone there's no counter like in kess2, right?

[70max]

Hello friends DK,
But the K-tag clone works well and does all the car described?

Thanks for the reply


Best Regards Max

Protocolli disponibili per K-TAG:
BDM MOTOROLA MPC5xx
J-TAG NEXUS MPC5xx
BOOTLOADER MITSUBISHI MH72xx/MH8xx
BOOTLOADER INFINEON TRICORE
BOOTLOADER ST10

[atomiczen]

thanks for the big list reposted....:eviltongue:

[70max]

thanks for the big list reposted....:eviltongue:


Sorry mate,
But he pasted the whole list.

[gezame]

this is my problem with xp sp3 and 7 home 64bit

Hi
You need update internal firmware in k-tag.
Br.

[didi_du_93000]

Read / write Mazda 5 with denso RF7N full working !!

[19antonio]

someone would be kind enough to send photos of the motherboard ktag. to check if any component is missing, my ktag does not work.
thanks

[soxten]

I did read bdm on EDC16C31 Volvo XC70 / Volvo V70 2007
Eeprom
Flash

Working fine!

[Roader]

Hello,i have problem with my K-tag when i make read to files it save me file that is with wrong file size example flash file from bosch edc16 ecu is 1mb,the file K-tag save is 300kb...but when i try to open it with WINRAR i see the correct file inside 1mb but is PASS protected...anyone know how to fix this? i try on 2 ecu's and the files on the 2 ecu's are the same...when in the K-tag menu write (maps) example EXT FLASH (maps) file is 300kb RAR file...

[Roader]

i found where is my problem,the k-tag is slave version,not master...anyone know how to make it master?

[darwins]

Hi Guys

I don't have this clone, but I see these people sell a replacement chip (http://obdtool.co.uk/wholesale/ktag-k-tag-ecu-programming-tool.html), It might be useful to some one I'm sure :)


I'M NOT RECOMMENDING THIS COMPANY I DON'T KNOW THEM AND HAVE NEVER BOUGHT FROM THEM !!!

Note: Please don't try to update the KTAG, it will damage the tool. There are two ways to solve the problem:
1. If you know how to change CPU LPC2478FBD208 for Ktag, you can buy new one from us, 20USD each piece, not including the shipping cost.

2. If you don't know how to change CPU LPC2478FBD208 for Ktag, you need to send back the main unit for repair. And you need to pay 53.00EUR for the repair

Regards

Darwins

[Roader]

Hello,anyone know how to make my tool master?

[moky]

i think,change mcu..

[theghost]

deleted (http://www.digital-kaos.co.uk/forums/search.php?searchid=4297067) -> post was an mistake sorry

[Roader]

my problem is similar like in this topic
http://www.digital-kaos.co.uk/forums/f171/ktag-clone-kessv2-checksum-error-309459/

people make it without change MCU,i will try also,if i need to change MCU i will return to china

[soxten]

Citroen Jumper 2012 180hp EDC17CP52 (Infineon Tricore TC1797) Bosch 0281018291 / 51912094
Ktag clone read Tricore on this ECU Eeprom and Maps Perfect!

[luis12]

I installed a KessV2 clone and suppose it comes with Jtag but when try to open Jtag only displays ecus numbers but no OK button any idea to resolv it? thx.

[soxten]

Today read Citroen Berlingo 2012 1,6HDI 90hp EDC17C10 Tricore TC1797 (Backup/maps/Eeprom)

[bbturbo]

I tested the Ktag on:
MINI MEV17.2 (TC1766) -read/write without any problems
Audi RS5 (2011)-MED17 with tuning protect -read/write without any problems

Hello, this is my first time with the new KTAG. I read that you were successful with a R/W of this ECU. I tried to read today but keep getting error message;

"Communication error, please check power and connections - x100B"

I've checked the wires of the KTAG and strangely there's no 12v supply - 12v adaptor is connected to unit. I supplied 12V directly to the ECU with an external adaptor but still cannot communicate.

Wire connection followed "Family 152: MED172 IROM - Turbocharged engine TC1766"

12v to pin 16 and pin 19
GND to pin center pin bottom row
CAN-H to pin 40 (white wire)
CAN-L to pin 52 (green wire)

Could the unit be faulty? never used it before as it is my first time.

Any help appreciated.

[asso]

double-check the connections I have made many ECU with this tool including a mj8df without problems.
you may have some scraps of aluminum in the pcb controls well.
then try to insert the ECU in the car and see if you start the engine, if not, you have damaged the pcb when you open the cabinet.

[euroscan1]

ktag with no counter.

[theghost]

deleted (http://www.digital-kaos.co.uk/forums/search.php?searchid=4297067) -> post was an mistake sorry

[overs0ull]

Hi , at this moment you can't get any kess v2 clone or k-tag klone whit out counter !
I can get mcu for them whit 50 tokens again but for the moment don't have a unit whit out counter .
Regards

[aslamaslam]

is goooooooooooooooooooood

[minchion]

ktag with no counter.

so what is the difference from this one and other tools with counter ?
is there any mod or is the MCU ?

[bbturbo]

Hello All,

ME7.9.8 / KIA Clarens

Looking at the connection picture diagram and table, there is conflicting information concerning the connection of 12v to the ECU. In the pic diagram, written 12v pins are pin 62 & pin 63 but circled pins are pin 82 & pin 83. In the table, 12v pins are pin 62 & pin 63. Would anyone know which are the correct 12v+ pins?

Rgds
CP