View Full Version : No signal through hd cable
WOLVES09
1st August, 2012, 04:27 PM
Afternoon all, just wondering if anybody could help? I've got a S9 which has been working like a dream until my router packed up, after replacing my router I powered the box back up, it booted up fine on the front of box but there was no signal coming through to the tv! I've changed the hdmi lead but still nothing, the only time there's a picture is when I plug a scart lead in the back, once removed and hdmi put back in there's no signal again! Any ideas would be appreciated greatly and probably stop me having headaches lol
cactikid
1st August, 2012, 04:30 PM
do you have to change settings on box or tv?
andy91
1st August, 2012, 04:30 PM
Afternoon all, just wondering if anybody could help? I've got a S9 which has been working like a dream until my router packed up, after replacing my router I powered the box back up, it booted up fine on the front of box but there was no signal coming through to the tv! I've changed the hdmi lead but still nothing, the only time there's a picture is when I plug a scart lead in the back, once removed and hdmi put back in there's no signal again! Any ideas would be appreciated greatly and probably stop me having headaches lol
Are you talking about premium channels?
Chances are you need to setup the network again with the new router.
Andy.
WOLVES09
1st August, 2012, 04:38 PM
All channels, there's no settings on the tv and I've got all the same settings on the box as before! Could it be a firmware problem, just seams strange that it's only just happened when my router went down!! Every channel is coming through the scart fine
andy91
1st August, 2012, 04:42 PM
All channels, there's no settings on the tv and I've got all the same settings on the box as before! Could it be a firmware problem, just seams strange that it's only just happened when my router went down!! Every channel is coming through the scart fine
Have you changed to a different brand of router ie Netgear,Belkin?
Andy,
cactikid
1st August, 2012, 04:50 PM
if scart is working ok,have you retried another hdmi.
WOLVES09
1st August, 2012, 04:54 PM
Same router as in netgear! Tried different hdmi slots on tele even tried another tele lol
andy91
1st August, 2012, 04:57 PM
Same router as in netgear! Tried different hdmi slots on tele even tried another tele lol
I mentioned that just incase you swapped brands of router and you would need a different ip on the box to match the router.
Andy.
nibblitz
1st August, 2012, 06:11 PM
Has the hdmi Video output setting on the S9 gone to a setting that your TV doesnt support?
darcu5
1st August, 2012, 09:39 PM
could of caught the v-format button on the remote and changed it to wrong format as niblitz says above, if you press v-format once on remote and wait around ten seconds see if owt comes on tele, keep doing this.. press once wait over 10 seconds, theres a few v format settings but patience is a virtue
WOLVES09
1st August, 2012, 10:03 PM
Ok cheers I'll give it a try! Box has been on there for 6 months or so must be something daft that's changed somehow
eattheliving
2nd August, 2012, 08:09 AM
Ok cheers I'll give it a try! Box has been on there for 6 months or so must be something daft that's changed somehow
i had the same issue mate. see post below
http://www.digital-kaos.co.uk/forums/f184/hdmi-feed-279264/
got no replys so took it as s9=bin.
i tried all the above. in the end went back to the trusty tm600( better pic on scart)
:manusign:
WOLVES09
2nd August, 2012, 08:29 AM
Dd you try upgrading the firmware! This is gonna be my last option
eattheliving
2nd August, 2012, 09:03 AM
Dd you try upgrading the firmware! This is gonna be my last option
yep. still didn't work mate and now to cap it all off my sons s10 lan port is playing up. typical
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.