daihatsu 2006

[richard27]

daihatsu shiron 2006 all lost key l can key add immobox location ? transponder tip?

[lashkar97]

immo is under steering or behind console box
allowed transponder 4D

[keygargoil]

try behind the clocks post the dump and key data id 67 it should be and il add it for you

[richard27]

hi I'm looking for I'm going to disassemble the immo box I add when I found :D

[richard27]

read eprom 93lc66a immobox please add key
4D67 veri:B1-D7-65F41ACF

[bram380]

You need id67 pg1.32,52 or 92

[DylanImmo]

Dear sir.try this virgin file and report it.
Prepare 2 pcs 4d67 transponder key(pg1 52).

[richard27]

veri: 4d67 1.key 32 C5 10AABB01
veri: 4d67 2.key 52 F5 4E6F9C33

[richard27]

Dear sir.try this virgin file and report it.
Prepare 2 pcs 4d67 transponder key(pg1 52).

I tried it but it is not dying light stays lit 2 key key drawback is burning directly

[bram380]

try this dump (pm) & report result:

[workdamnyou]

Try this,

I've only done 4 of these, they're not popular here.

Dealer keys are Page1: 72

Pass in PM

[lashkar97]

Dear sir.try this virgin file and report it.
Prepare 2 pcs 4d67 transponder key(pg1 52).
your file is not virgin

[richard27]

Try this,

I've only done 4 of these, they're not popular here.

Dealer keys are Page1: 72

Pass in PM

I'm trying it now

[richard27]

threw light on the bridge I wrote directly to the file you put on fire the ignition keys, 2 keys opened the flashing light flashing and not working I tried the same bridge, but still a car that took pg1 72

[richard27]

If I get impatient waiting for a cure for the customer

[richard27]

hello friend dk I can give you the key data write electronic key please You'll see a help would be much appreciated (immo box picture)

[keygargoil]

here is your file both keys ok what did you produce the chips with

[richard27]

Thank you very much everyone just try it

[richard27]

poor little car that did not work: (

I have a new chip more

[karrom]

poor little car that did not work: (

I have a new chip more

try this dump
key data 72 F1 1A BB 81 6D

[richard27]

immediately try to complete thnx

[richard27]

: Secruity: :( :( :( :( This is Why scrap

[bram380]

you need transponder from daihatsu.
id67 wont work on that immo.

[lashkar97]

if this file is not work then your immo has been damage. so change immo and write my file and put 2 keys of daihatsu 4D one by one and you are done .please dont use toyota 4d key . dont forget push thank button.
Remember this file is work 100% and i used this more then 100 time .
:wink:

[richard27]

hmm l How do I find 4d67 toyota daihatsu they Thank you will try to find

[karrom]

hmm l How do I find 4d67 toyota daihatsu they Thank you will try to find

did you read the dump 8 bit or 16 bit
your immo like immo RX400 hybrid

[bram380]

Lashkar97 (http://www.digital-kaos.co.uk/forums/members/290516-lashkar97/) was correct,
you need 2 keys to complete registration.

[karrom]

daihatsu shiron 2006 all lost key l can key add immobox location ? transponder tip?
your dump.............

[keygargoil]

poor little car that did not work: (

I have a new chip more


i have re loaded your dump the keys were written wrong

[richard27]

if this file is not work then your immo has been damage. so change immo and write my file and put 2 keys of daihatsu 4D one by one and you are done .please dont use toyota 4d key . dont forget push thank button.
Remember this file is work 100% and i used this more then 100 time .
:wink:

I tried to cast light on this, yes I'm wearing the key for 3 seconds Flashing lights direct the light starts to burn again, I'm wearing two switch off but the light still does not work Sorry for bad English is..

[richard27]

I tried to chip the original 4d67

[richard27]

picture What else can it be done pleaseeeeeee
carmenscan dtc scan p1621 Trouble code P1621 means: Engine control module engine immobilization input circuit malfunction

http://youtu.be/Wn8z0qHazuM

[lashkar97]

I tried to cast light on this, yes I'm wearing the key for 3 seconds Flashing lights direct the light starts to burn again, I'm wearing two switch off but the light still does not work Sorry for bad English is..

symptoms is like faulty immo . first check wiring of immo . power supply,s of immo and communication wires between immo and ecu . after that change immo
even from scrapyard and write V file and insert 2keys one by one and car will be start 100% its my guaranty.
used immo cast is 30$ very cheap so dont worri

[richard27]

hi friend you are forced to read from it, but I would not karrom 16 BYT I see the bird you send them to the service tool today all the friends Thank you very very very ververy ververy ver much

[bram380]

hi friend you are forced to read from it, but I would not karrom 16 BYT I see the bird you send them to the service tool today all the friends Thank you very very very ververy ververy ver much

Car can start with that dump?

[richard27]

asked to read 16 BYT karrom having read no forced car stops working service tomorrow morning, go to
lashkar97 I tried your method, I brought 2 daihatsu switch turns off the light right back I opened the car on fire so it does not work Thanks to all the service is going to
There is no insurance, and installation is also a problem

[richard27]

I would like to thank everyone here first
keygargoil here gave great effort, but his greatest work thanks to this car

I am very happy with the light closed car in keygargoil worked