View Full Version : 159 sw 2.4 dpf help
esse
3rd August, 2012, 03:55 PM
hi ,
please i need help to remove DPF from this ecu
i haven t ori file i have only mod file to chiptunning
thanks
mario38
3rd August, 2012, 05:01 PM
ok, i saw your file is really hurt a lot .. egr off is not good
the change to your file is really very bad ...
esse
3rd August, 2012, 05:14 PM
it s mod file by tuner and i want dpf off
i have ecusafe2 but i don t know if works fine with this ecu EDC16C39
thanks
esse
3rd August, 2012, 05:19 PM
ok and i paid for that!!!!!Haaarrrg
i haven t ori to compare....
Waynew
3rd August, 2012, 05:38 PM
Here you go mate
post reply
regards
wayne
esse
3rd August, 2012, 05:54 PM
thanks waynew
With the answer of mario38 I am not going to test now and to try to correct problem
thanks for works
assitutto
3rd August, 2012, 08:55 PM
test before the original file without dpf, then tuning your car
ecusafe work on edc16c39 fiat alfa lancia
PS: sometimes shows the level of ash dpf 1000%, but you may fix editing a single bit in the file
esse
3rd August, 2012, 09:31 PM
Thank you has all for your help
I made the fap off with ecusafe he says OK but I did not know if it worked fine
I bought the vehicule with the file tuned and works but more or less i don t know
I need the file ori or a good tune file because mario38 says it s a bad tuning
any help shall be very appreciated
mario38
4th August, 2012, 01:14 PM
test before the original file without dpf, then tuning your car
ecusafe work on edc16c39 fiat alfa lancia
PS: sometimes shows the level of ash dpf 1000%, but you may fix editing a single bit in the file
dpf off = 0%
dpf off = 1000% is not a good solution
ross79ta
4th August, 2012, 01:36 PM
1000% is a bug of ecusafe only for few edc16c39. That bug don't compromises the rest of work. It can be solved acting on a single bit.
esse
5th August, 2012, 08:27 PM
solved by mario38
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.