159 sw 2.4 dpf help

[esse]

hi ,
please i need help to remove DPF from this ecu
i haven t ori file i have only mod file to chiptunning

thanks

[mario38]

ok, i saw your file is really hurt a lot .. egr off is not good
the change to your file is really very bad ...

[esse]

it s mod file by tuner and i want dpf off
i have ecusafe2 but i don t know if works fine with this ecu EDC16C39
thanks

[esse]

ok and i paid for that!!!!!Haaarrrg
i haven t ori to compare....

[Waynew]

Here you go mate
post reply
regards
wayne

[esse]

thanks waynew
With the answer of mario38 I am not going to test now and to try to correct problem
thanks for works

[assitutto]

test before the original file without dpf, then tuning your car
ecusafe work on edc16c39 fiat alfa lancia

PS: sometimes shows the level of ash dpf 1000%, but you may fix editing a single bit in the file

[esse]

Thank you has all for your help
I made the fap off with ecusafe he says OK but I did not know if it worked fine
I bought the vehicule with the file tuned and works but more or less i don t know
I need the file ori or a good tune file because mario38 says it s a bad tuning

any help shall be very appreciated

[mario38]

test before the original file without dpf, then tuning your car
ecusafe work on edc16c39 fiat alfa lancia

PS: sometimes shows the level of ash dpf 1000%, but you may fix editing a single bit in the file


dpf off = 0%

dpf off = 1000% is not a good solution

[ross79ta]

1000% is a bug of ecusafe only for few edc16c39. That bug don't compromises the rest of work. It can be solved acting on a single bit.

[esse]

solved by mario38
thanks