Detonator belt retractor on the passenger side front audi A4 2011

[hafido1983]

hi guys i need yours help about airbag audi A4 2011
i do diagnossis by vag-com and gives me this message and i want to know where i can find it by picture i verify the passenger belt is ok
message:

9438747 -Detonator belt retractor on the passenger side front
B1006 1B [137] - Resistance too high
capture:
State of the fault: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 16473 km
Date: 2010.03.22
Time: 5:10:29 p.m.
please i need the help
thanks in advance

[hacper]

There are two connectors in the belt you know?

[hafido1983]

There are two connectors in the belt you know?
yes friend there are 2 connectors in the belts and two are ok
but this fault code it mean this in the picture or only the belt ?

[kalelarga]

Trying to put directly on the connector 2.2 ohms resistance to examining the correctness of the line

[hafido1983]

9438747 - Igniter for Seat Belt Tensioner; Driver's Side
B1006 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 16534 km
Date: 2010.03.24
Time: 13:13:45
this the fault who has idea about this problem

[kalelarga]

9438747 - Igniter for Seat Belt Tensioner; Driver's Side
B1006 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 16534 km
Date: 2010.03.24
Time: 13:13:45
this the fault who has idea about this problem

Put 2,2 ohm resistor on conector for seatbelt tensioner,or direct on conector under seat and clear error with vcds.
Cause of errors can be deep cleaning seats.