PDA

View Full Version : lnb settings Confusing me



akka87
7th August, 2012, 06:12 PM
Sorry for all Daft ? i have browsed the site but Can not find no info. Currently been messing with my lnb settings. as i seen thread as few my channels want working i.e Music . anyway i sent my lnb at 9050 and music channels work . but movies don't any ideas Cheers

Tryed moving dish left and right but no joy

Edit ps before messing i dint have any music channels anyway just the Free to air ones also Tryed different ccams (sorry if not allowed to say that but still having same problems

mdt
7th August, 2012, 06:21 PM
Sorry for all Daft ? i have browsed the site but Can not find no info. Currently been messing with my lnb settings. as i seen thread as few my channels want working i.e Music . anyway i sent my lnb at 9050 and music channels work . but movies don't any ideas Cheers

Tryed moving dish left and right but no joy

Edit ps before messing i dint have any music channels anyway just the Free to air ones also Tryed different ccams (sorry if not allowed to say that but still having same problems



set your lnb to ... universal, 9.75/10.6 los. 22khz-auto unless you have a very old 10ghz lnb,regards mdt

akka87
7th August, 2012, 06:25 PM
set your lnb to ... universal, 9.75/10.6 los. 22khz-auto unless you have a very old 10ghz lnb,regards mdt

thats what its set at mate and when i set it at 9050 music works but not movies dont

akka87
8th August, 2012, 10:34 AM
Change your lnb settings 9750 10750 recan ur box it might help cheers
<<< this also did not work any ideas guys this is baffling my head

P.s that was off another Forum Cheers

darcu5
8th August, 2012, 03:15 PM
when you are on the said movie channel that is missing press info a few times till it comes up on screen showing the signal stregnth, does it show good signal or is it grey meaning crap? go to kingofsat.net and make sure you have the correct transponder showing on your box for what you are trying to open.. if the transponders correct make a note of the transponder and go into antenna set up, the 3rd line down shows a list of transponders... go to the one you made a note of, the line above this shows the lnb frequency, scroll to the right on that until you hit the universal ones, then scroll through the universal ones until the signal comes up, give it a few seconds between switching the frequency though as it doesnt change immediately, when and if the signal comes up exit the menu and try the missing channels again
failing that buy a cheap radio and tune it in without radio stations lol

akka87
8th August, 2012, 05:44 PM
ha ha i will just leave it to confusing