MB W220

[makura]

Can some one please help with a good set of dumps for MB W220 with ecu number A026 545 65 32 and EZS number 215 545 00 08.
some one got to this car before me and took out the HC11 from the ecu,now i have done the keys and the EZS turns but the car wont crank,only to open the ecu and no MCU HC11,now i have another HC11 but no file to write in it.
A virgin file for the ecu will do too,can synch with star.

[DSAuto]

Can some one please help with a good set of dumps for MB W220 with ecu number A026 545 65 32 and EZS number 215 545 00 08.
some one got to this car before me and took out the HC11 from the ecu,now i have done the keys and the EZS turns but the car wont crank,only to open the ecu and no MCU HC11,now i have another HC11 but no file to write in it.
A virgin file for the ecu will do too,can synch with star.
Post the dump off ECU hc11.
I will make it virgin for you.
Regards

[makura]

Thanks for the fast reply,the ecu does not have HC11 and the HC11 that i have is new and does not have a file in it.

[foxibg]

but is not virgin

[makura]

Thanks for the file,its a start i am sure some one will virginise it now.

[DSAuto]

Hi mate,

There is your file. Use Star to learn DAS.

Regards

Dimitri

[bram380]

but is not virgin

try this dump:

[makura]

try this dump:
Is this a HC11 file or 93cXX file?i need a HC11 file,i see the 2 files posted above are so different,which one is 100 percent sure to work,cant remove the HC11 2 times just to try both out.

[makura]

Failling to synchronise using star on both files,i keep getting an error about the vin number in the ecu being read as 00000000000,does any one have a complete set of dumps,EIS,ECU and ESM with good keys(no hash errors) that i can just write to all these and call it a day?

[makura]

any one help please..

[makura]

Still hoping some one can post these dumps,it seems no one has read the EZS,ECU and ESM from a W220.
Just my luck.

[foxibg]

hi, make key

[makura]

My life saver,I can breath again.:trytofly:

[agabna]

hello
send your vin
thanks

[makura]

hello
send your vin
thanks

WDB2200652A083356 THANKS

[agabna]

WDB2200652A083356 THANKS

your car model is 18/10/1999 s 320 engine 112 v6
your ecu no should be
1- 025 545 85 32
2- 026 545 65 32
confirm these pls

i ll try to make new ecu for you but u ll need das for coding
but if you have no das it bettetr to try to read the old data for the ecu and i ll make for you new data can start 12 times untill you code it

[agabna]

WDB2200652A083356 THANKS
hello
these is new data with your vin no for ecu no ( 02 65 45 65 32 )
but i think it better to try to read your old ecu to know the problem

try and report

[makura]

My ecu is number 2 on your list,can u use the dumps posted by Foxibg and add my vim number instead?My ecu had a missing micro HC11.how about my ESM?not sure if the dump is still good or original,thats why i wanted a complete dump set to cut up on the time i am wasting on this car.

[agabna]

WDB2200652A083356 THANKS
hello
and i think it better to check the ecu no befor you try to write the dump

[agabna]

hello
i think first you need to erase the flash in the hc11 and try to write the new dump
and after that you ll need the das for coding
and the car can run after that
thanks

[agabna]

My ecu is number 2 on your list,can u use the dumps posted by Foxibg and add my vim number instead?My ecu had a missing micro HC11.how about my ESM?not sure if the dump is still good or original,thats why i wanted a complete dump set to cut up on the time i am wasting on this car.

you can not use that data from foxibg because it for other vin (220 063 2 a 109125)
and he said that
thanks

[agabna]

My ecu is number 2 on your list,can u use the dumps posted by Foxibg and add my vim number instead?My ecu had a missing micro HC11.how about my ESM?not sure if the dump is still good or original,thats why i wanted a complete dump set to cut up on the time i am wasting on this car.

if you want to cut your time buy new set ( EZS+key+ecu)

but i think it good for you to learn more how you can do it
now you have two data
1- from me with your vin no
2-the other data from bram380 http://www.digital-kaos.co.uk/forums/members/67678-bram380/

any one off these data your car should work unless your ecu is damge

[makura]

you can not use that data from foxibg because it for other vin (220 063 2 a 109125)
and he said that
thanks
Ok thanks,just dont want to come back here asking for the dump for ESM,all these problems started when some one tried to make keys for the car,now i am pretty sure the dump from the ESM was tempered with,i read this from the 93c56.
If some one can renew pleaase.(virgin)

[benzstop]

Ok thanks,just dont want to come back here asking for the dump for ESM,all these problems started when some one tried to make keys for the car,now i am pretty sure the dump from the ESM was tempered with,i read this from the 93c56.
If some one can renew pleaase.(virgin)
here is your dump, need to code with star

[makura]

I can't win with this vehicle,i have written a virgin file to the ECU and ESM when i try to TEACH IN DRIVE AUTHORISATION SYTEM i get to the part where it reads the vin num from the ECU and when i click on f5 to confirm the vim i get an error that says THE IDENTIFICATION OF THE ENGINE CONTROL MODULE COULD NOT BE CARRIED OUT WITH DRIVE AUTHORISATION
POSIBLE COUSES
-THE VEHICLE IS LOCKED WITH DAS
-CONNECTION TO DAS
-VOLTAGE SUPPLY OF DAS
But i can read fault codes and actual readings on all the control units.
any pointers guys?

[makura]

any pointers guys?

[smayer]

The key turn in EZS?
If yes maybe the ECU is not virgin.

[makura]

The key turn in EZS?
If yes maybe the ECU is not virgin.
The key turns and the ignition comes on,i have written the virgin file posted above.when i check real values of the ecu it says.
ecu locked-no
ecu-read--yes
start autho--no
ezs and ecu compatable---yes

[smayer]

The key turns and the ignition comes on,i have written the virgin file posted above.when i check real values of the ecu it says.
ecu locked-no
ecu-read--yes
start autho--no
ezs and ecu compatable---yes

what dump you have in ECU?

[makura]

the 1 in post 17 at the top of this page.

[smayer]

Use HC11 from similar ECU, write this dump and adapt with DAS. If your ECU dont have another problem car must start.

[makura]

Use HC11 from similar ECU, write this dump and adapt with DAS. If your ECU dont have another problem car must start.

Does this dump have my vin in it?

[smayer]

Does this dump have my vin in it?

YES, have your vin and it's open to Adapt with Das. Can be sure about this dump.

[benzstop]

unplug egs and see if it starts,02 model year will not start with egs from other car but will start if egs is unplugged and everything else matches.

[makura]

But the problem is that it wont let me scynch the ECU to EIS

[smayer]

Have used the right code to adapt ECU?

[makura]

What do you mean by code m8?

[smayer]

What do you mean by code m8?

Sorry mate,
Don't apply in this car.

[smayer]

Are you sure about the EZS is from this car?
your EZS is 00 08 and in EPC this part number don't match.

[makura]

Which part number is right?i inherited all these problems from some one else,i just made a key from the data from the EIS that i found on the car,only to find the ECU had no HC11 in it.It is possible that the EIS was changed.

[smayer]

Which part number is right?i inherited all these problems from some one else,i just made a key from the data from the EIS that i found on the car,only to find the ECU had no HC11 in it.It is possible that the EIS was changed.

A 220 545 04 08
A 215 545 01 08
A 215 545 03 08
A 215 545 05 08
A 215 545 07 08
A 215 545 09 08
A 220 545 08 08

[benzstop]

post part numbers for ezs and engine ecu with correct vin so we can see if all parts are compatible . Possible you have pieces that were not intended to be used together. Check part numbers found with scan tools and compare them with the stickes on the outside

[makura]

Any one with a complete set of dumps already synched please,this not working for me.

[smayer]

Maybe you have another problem in car, what is diagnose results??

[makura]

i will take screen shots today

[agabna]

The key turns and the ignition comes on,i have written the virgin file posted above.when i check real values of the ecu it says.
ecu locked-no
ecu-read--yes
start autho--no
ezs and ecu compatable---yes

hello
from your real value your poroblem is in :-

1- you das system can not do coding for the ecu
2-you dont use the right way for coding because these is old car befor 2000

and i thing your vin in the ezs is same in the ecu from your real value

if you whant to use other data remeber to erase the flash in the ezs mcu our use new one

[makura]

So let me get this right,you are saying i either use the vin number that is in the EZS or erase the flash in the EZS and leave it blank?