awaiting softcam or have some packages gone?

[footycard steve]

i see the dutch channels are down on 19 east and bulsat on 39 east are we just waiting for new softcams or have either/both changed encryption etc?

SORRY,i've posted this in the wrong section.

[excollier]

Awaiting, I hope, but Bulsat was updated on the 6th.

[dick b]

yeah whats left of bulsat is still open,waiting for cn/d

[footycard steve]

i think i've found the bulsat keys the first line starts 04 and has 16 pairs of digits do i enter these in slot 30 starting line 1 in the 04 line and and the rest in 54 which is the line below?,i have tm 1500ci+

[Manic01]

Just load softcam matey.

[footycard steve]

i'm having use remote to enter keys now,my computer with the rs 232 port is still out of use and was told that using a serial lead via the laptop was tricky,i've opened the file above but it doesnt list what the slots correspond to.

[Manic01]

Throw the tm1500 and get a usb hd receiver.
02 and 52 on tm5402
maybe 04 and 54 on tm1500 not sure
Look for provider 060400

[footycard steve]

i have slots 29-34 with (060400) with slot 30 being 03,53 04,54 and as the keys i found listed start 04 i thought this would be the correct slot but it doesnt give the the line for the second lot of 8 pairs so i thought its likely to be 54 however if i enter them and they dont clear can i just re-enter the keys i have in now again without doing any damage?

didnt clear in 04-54 but did in 02-52 these are the active keys but also have the next can you guide me which slots they are for please.

[Nutsandbolts]

i have slots 29-34 with (060400) with slot 30 being 03,53 04,54 and as the keys i found listed start 04 i thought this would be the correct slot but it doesnt give the the line for the second lot of 8 pairs so i thought its likely to be 54 however if i enter them and they dont clear can i just re-enter the keys i have in now again without doing any damage?

didnt clear in 04-54 but did in 02-52 these are the active keys but also have the next can you guide me which slots they are for please.
Hi. Steve. IRDETO 02 system dont use 08 keys (04/54 in TM's). Thats why it did not clear when you used 04/54s. For your info and other members the keys in TM should be as follows:

IRDETO key 02 = TM 01/51
04 = TM 02/52
06 = TM 03/53.

I personally never use a softcam because as you have found out they fill up loads of slots with useless keys. I enter keys manually . Years ago it was different as so many packages were opened it was easier to use a softcam than entering so maky keys manually. It does not matter which slots you use so long as the info is correct as follows:
ENCRYPTION SYSTEM ie IRDETO
PROVIDER ID ie 060400 or 062200
KEY INDEX ie 01/51 plus the key value.

Hope this makes sense.

Regards.
:bounce: :bounce: :bounce: