View Full Version : help to sync immo box and ecu for toyota picnic
elmaalouf
8th August, 2012, 10:45 PM
hello friends pls i need help to pair immo box and ecu fot toyota picninc 98 model the problem i lossed the immo box and i bought another one and dont know how to synchronize with the ecu
thanks for any help cos its a problem to me :(
nasir
9th August, 2012, 07:12 AM
Short pin 4 & 13 for 30 min in obd connector.
elmaalouf
9th August, 2012, 07:28 AM
There is no obd in this 98 car there is onlu old toyota socket
TISO
9th August, 2012, 01:06 PM
put immobox back in car and master key in cylinder without ignition, no idea how long it takes, let it stand for a day.
i?m not sure if it work with picnic. i have made it with starlet 98 and rav 96 and it worked.
test it and report
Meat-Head
10th August, 2012, 09:58 PM
Damm it - this has cropped up before you can do it with the old type diagnostic, but no idea - damm damm, dammm
*TRY* search for Toyota Celica in the immo section - think that's where it was.
just looked can't find it
keygargoil
11th August, 2012, 12:09 AM
There is no obd in this 98 car there is onlu old toyota socket
have you fixed it yet
elmaalouf
11th August, 2012, 12:21 AM
No not yet
keygargoil
11th August, 2012, 06:32 PM
No not yet
have you located the ecu yet also is it id33 or 4c immo box
elmaalouf
11th August, 2012, 09:50 PM
its a 4c and there is no eeprom c46 or c56 inside i didnt find a known eeprom
thanks
diag13
11th August, 2012, 10:03 PM
Hi there
i think you bridge TE1-E1 for 40 mins with ignition switched on ,but only if the immo box has recieved a valid key.
If you obtained a used unit with no keys ,then you must prepare a key first from the dump.
ssemmedo
10th December, 2018, 09:04 PM
please can u post your virgin file so i can use it i have the same problem here i cant make the car to start put key data into dump but car starts and dies in 5 sec.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.