Help to immo off uce seat toledo 0281001484

[javiercj]

Hello friends

I have seat toledo tdi 1.9 tdi 1900cc year 1996

i need the unit immo off

the uce ref is: 0281001484

the eeprom immo is 24c02 B58253)

i do the immo off, but the ecu is not working.

i attchment file orig and file immo off

I hope your replay

thanks

[jacostanzo]

Tested solution, disconect immo box

[javiercj]

Tested solution, disconect immo box

how to make the file immo off with the program ecuvonix or immo killer?

[electrones]

Hi friend

ecuvonix and immo killer

1 - need to select the mark at No. 1
2 - then the system, to teach the system appears to program the eeprom (95xxx or 28fxx or 29fxx or 951xx.....)
3 - appears a folder to load dump
4 - after a clik in repair
5 - save
original is offff try and star or not
you have to cut some wire immo or immo box off it depends on system

[javiercj]

Hi friend

ecuvonix and immo killer

1 - need to select the mark at No. 1
2 - then the system, to teach the system appears to program the eeprom (95xxx or 28fxx or 29fxx or 951xx.....)
3 - appears a folder to load dump
4 - after a clik in repair
5 - save
original is offff try and star or not
you have to cut some wire immo or immo box off it depends on system

hello thanks by request

Thanks by the steps but I have already used ecuvonix and immo killer - often do not work

have information to say?

**Can help and tell when it is necessary to disconnect the immo box depending on the type of sistema:br
box

**When you need to cut cable to signal cases or immo

**need to change the eeprom by eeprom write-protected so that you do not modify the data control unit and the car boot
.
As the case of the seat toledo with uce 0281001484 eeprom?



Please help thanks

[javiercj]

Tested solution, disconect immo box
ok thanks

Where is the immo box?

[javiercj]

Tested solution, disconect immo box

Hi

I tried the immo file
have removed the immo box but the car starts and shuts.

And starts 2-3 the heater is fixed light will not shut off and will not start more



Please help thanks



It have the squematics electrics immobox-uce?

[jacostanzo]

Hi

I tried the immo file
have removed the immo box but the car starts and shuts.

And starts 2-3 the heater is fixed light will not shut off and will not start more



Please help thanks



It have the squematics electrics immobox-uce?

My friend, I think you have another problem, I have tried this file many times in this ECU and I never had a problem.
You can tried make immo off on immo box, put back your original file on ecu, and conect immo box, use this dump.
I never tried so good luck! :cool:

[javiercj]

helllo friend

i also think it have problem in the car.

it can tried make immo off on immo box but i dont working?

I'll try to make off in the immo box immo.

and restore the ecu

know if this micro can be read in circuit or have to unsolder

programmer to use

thank you for help

[javiercj]

My friend, I think you have another problem, I have tried this file many times in this ECU and I never had a problem.
You can tried make immo off on immo box, put back your original file on ecu, and conect immo box, use this dump.
I never tried so good luck! :cool:

Hello Friend

a

question in that car through

immo box remove the pin-code by reading the micro immo

box and with the pin-code to encode the car keys?
do
program used for pin-code through reading of the micro

that machine allows you to encode keys the sbb?

hope your

help thank

[electrones]

Hi friend
Take a look here Programaci?n de Controles (http://programacion.cerrajeriamg.com) this link, here you can find how to program some keys, how to find some immo box, how to find some immo micro-chips date location, names of transponders to use and more ... program used for PIN code, we have: immo reader, WRcode and more ... but I think the best is the ICC - immo calculator. I have no more information about it because I live in a very poor region in auto and technology resources or tools to repair. all I have to acquire from our house which is DK, and say thanks to DK and mates residents. good luck -_-

And try this dump not tesded ;)

[javiercj]

Hi friend
Take a look here Programaci?n de Controles (http://programacion.cerrajeriamg.com) this link, here you can find how to program some keys, how to find some immo box, how to find some immo micro-chips date location, names of transponders to use and more ... program used for PIN code, we have: immo reader, WRcode and more ... but I think the best is the ICC - immo calculator. I have no more information about it because I live in a very poor region in auto and technology resources or tools to repair. all I have to acquire from our house which is DK, and say thanks to DK and mates residents. good luck -_-

And try this dump not tesded ;)

Hello Friend

thank you for sharing

have the Calculator controls information

had

If I can help in something count on me

thank you

[umoussa]

First of all, there is no need at all to remove the immobox or cut immo wires for any VAG car, this is not valid at all. As there is no system in VAG that permits auto coding.

Secondly, Post here a scan log by VCDS for the ECU, i need to be sure that it's alive.

[javiercj]

First of all, there is no need at all to remove the immobox or cut immo wires for any VAG car, this is not valid at all. As there is no system in VAG that permits auto coding.

Secondly, Post here a scan log by VCDS for the ECU, i need to be sure that it's alive.

Hi

that I do

first diagnose the car

uce and posting results

'm going to diagnose engine and immobilizador

switchboard and put results

thank you for answering