View Full Version : problem reading memory B58383 the ecu renault 0281001809
daewo97
12th August, 2012, 06:49 PM
I have to do immoof, this Renault Scenic,ecu bosch 0281001809. but can not read memory, the upa usb or with wellon vp 380,both displays each error.I tried other memory models:atmel 24c02,....24c04,and it works,but this memory can not read it. I tried a memory B58383,from a bosch ecu from T4, and even this could not be read.Are some secrets about reading these memoirs B58383?
Mention, I have not read the memory directly into the circuit.
Has someone ready to give me a dump modified for this model?
Thanks!
ahadi
12th August, 2012, 06:56 PM
select the brand fairchild or microchip .
daewo97
12th August, 2012, 07:04 PM
but upa, does not have these options.
has only 24c....
and wellon... try tomorrow, thanks!
bram380
12th August, 2012, 07:08 PM
try short pin 1 & pin 7.
now eprom should be can read & write.
daewo97
12th August, 2012, 07:29 PM
short pin 1 & pin 7 ??
need to test this..tomorrow give an answer
Thanks!!
Have a good evening!!!
luis12
12th August, 2012, 09:36 PM
Ignore when programmer promts pin 7 error and read, save this data in new 24C02 and thats all, Fairchild eeproms have problems. I solved a lot of problems with this proccedure.
daewo97
13th August, 2012, 08:20 AM
I can not read it, I tried every version...
can someone give me a dump off? please...
stefan_pavle
17th August, 2012, 06:13 AM
Look this site
http://www.digital-kaos.co.uk/forums/f178/i-need-immo-off-renaulscenic-0281001809-a-256323/
daewo97
26th August, 2012, 07:38 PM
thanks!!:trytofly:I solved the problem, the harder it was until I found 24c16,
felix_fetche
7th November, 2012, 09:35 PM
for thoes who own seeprog or memprog other from ELNEC, try to select B58293.
gabardo
15th August, 2013, 09:49 PM
clears all memory, placing contact records the new code and it works
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.