please generate keys w210

[m3m5]

mcu eis 1h52a
key big old 0F82b, need 041???

posted dump eis read with ak500

thanks in advanced

[bram380]

please detail:
-ezs type (2xx.xxx.xxxx)
-mcu code (zc....)
-software mcu (KW../..)

[lashkar97]

mcu eis 1h52a
key big old 0F82b, need 041???

posted dump eis read with ak500

thanks in advanced
tri and report

[m3m5]

please detail:
-ezs type (2xx.xxx.xxxx)
-mcu code (zc....)
-software mcu (KW../..)

sorry!! hehehehe

ezs 2105450008
mcu motorola zc410729cfu
kw33/97

i thought only need dump for make with skc.

X LASHKAR97, this is for writte in key 0F82???

thanks

[bram380]

write key3,4,5,6,7 format 041 to mcu 0f82g

[m3m5]

yes mate but where are keys maked ??? hahahahahha

[bram380]

yes mate but where are keys maked ??? hahahahahha

Lashkar1997 give these keys:
http://www.digital-kaos.co.uk/forums/attachments/f178/137089d1344861964-please-generate-keys-w210-e8afc18a-13-09-2012.zip

[m3m5]

oohh yes thanks!

i wrotte key, car don't recognize key

ak500 read key by ir and said Buffer data is invalid!!

[lashkar97]

did u active the key after write data at key . because you have big Motorola key . and you have to write key by IR and do it active after write .

[m3m5]

mate
I wrotte 0f82b with omega soldering directly to adapter. (Mask g72g) wrotte your data and put key in car 6-7 times, light blinked 1 time and key don't work.

Now i want writte by ak500, i have solder 0F82B in adapter, I can't do by ir, chip isn't nec.

Open your archive and said load data size error, data size invalid.

mcu key is zc428870cdw
MA 567.880.041
0F82B

[bram380]

key data format 041 for keys with mcu:
- 567 880 021
- 567 880 041
- 656 167 2070

[smayer]

use UPA or Xprog and lift pin1 in key MCU.

[m3m5]

heheheh hi friend smayer!!

have you got schematic for upa?? i can't find in DK
xprog said always device is silent, need put crystal oscilator ???

EDIT!! I found IT!!

[lashkar97]

mate
I wrotte 0f82b with omega soldering directly to adapter. (Mask g72g) wrotte your data and put key in car 6-7 times, light blinked 1 time and key don't work.

Now i want writte by ak500, i have solder 0F82B in adapter, I can't do by ir, chip isn't nec.

Open your archive and said load data size error, data size invalid.

mcu key is zc428870cdw
MA 567.880.041
0F82B
write data by ak500 and do active . u can write key by ir with ak500 but frist u need virgin key .for virgin do 000000 of all key data then u load file 041 any no key and write by IR .if u write key by solder adapter then also u can active key .procedure is same by ir u need virgin key but by solder adapter no need virgin write direct and do active .

[m3m5]

mate anything is wrong!! Problem is in your archive isn't folders 041, 051

in your archive upload for me, need find data key 041 inside archive???

Ii wrotte keys in mercedes time before, archive maked was different!

[smayer]

If anything is wrong I'm sure it's not the keys from lashkar97
:roflmao::roflmao::roflmao:
What you have in key MCU surface second line?? MA676880011 ??
576880021, 676880041, 6561672007??
675880051, 6543672004 ??

[bram380]

mate
I wrotte 0f82b with omega soldering directly to adapter. (Mask g72g) wrotte your data and put key in car 6-7 times, light blinked 1 time and key don't work.

Now i want writte by ak500, i have solder 0F82B in adapter, I can't do by ir, chip isn't nec.

Open your archive and said load data size error, data size invalid.

mcu key is zc428870cdw
MA 567.880.041
0F82B


Problem: "...load data size error..."
Because file not bin/hex format.

Extract zip file from Lashkar97.

[smayer]

The keys from lashkar97 are in ZIP
YOU MUST UNZIP THE FILE!!!
Use winzip, winrar or something like this.

[m3m5]

If anything is wrong I'm sure it's not the keys from lashkar97
:roflmao::roflmao::roflmao:
What you have in key MCU surface second line?? MA676880011 ??
576880021, 676880041, 6561672007??
675880051, 6543672004 ??


I haven't got any dubte mate!!! hehehe

Is in zip, i can see it, but extract archive and appear only big dump like pictures. Haven't got bin for keys or open with incorrect software

this is all problem.

[bram380]

here your keys:

[m3m5]

key working mate!!!

[smayer]

what keys, from Lashkar97, bram380, or me?

[m3m5]

Bram 041 key 6 works!!
Only writte archive in key, put key inside ezs keys open ezs.

Smayer, your keys works too!!

lashkar97 I don't know what's happen with his archive, can't open correctly. i posted screen with his archive. Or bad upload, Winzip said error when extract and winrar extract bad archive.

Now customer wants other key, i have got small key nec inside, writte by ir by ak500 key 7 for example???

thanks to all firiends!!

[bram380]

Dumps from Lashkar97 & Smayer should be working.

About zip file with RAR software:
clik 2x zip file,
clik view,
select all file,
Extract to destination folder,
now the files become format bin.