View Full Version : MS43 rev limiter upgrade
Cloudforce
14th August, 2012, 01:25 PM
hello guys,
is there someone able and willing to raise the rpm limiter to 7000 at both files?
many thanks in advance :bounce:
jolidj
14th August, 2012, 03:34 PM
rpm limit off. post report.
Cloudforce
15th August, 2012, 05:28 PM
what exactly do you mean with statement rev limiter off? no rev limit at all? :afraid:
I guess you used ms43_ago for modifying?
jolidj
16th August, 2012, 01:18 AM
you try the file?? you test it and report.... the name is not important, i test this file.
ecuconnection
16th August, 2012, 01:44 AM
There is several limiters in MS43. Not just one
jolidj
16th August, 2012, 01:56 AM
i test this , is 2 limiter maps.. in my car i remove the rpm limiter . trye and report.
Cloudforce
16th August, 2012, 08:23 AM
have to wait till the weekend, as my car is equipped with auto gearbox and it will not revv till 7000 :stupid:
jolidj
16th August, 2012, 11:17 AM
try and report, you see the rpm limiter is off.
Cloudforce
16th August, 2012, 12:05 PM
even at auto tranny? no forced shifting?
Morette
16th August, 2012, 12:43 PM
Those gear changes are from the EGS controller, it will always change at the preset point.
jolidj
16th August, 2012, 01:12 PM
you change the rpm engin , gearbox have the same rpm.
Morette
16th August, 2012, 01:53 PM
OK, it might be a different system, I know other versions like the V8s would still change gear at 6100, even if the RPM limiter was raised for the engine.
Cloudforce
16th August, 2012, 03:33 PM
so i still have to buy a ESS or Dinan EGS Software? :-(
and we have to wait till weekend until i can post results as my car won?t let me revv to 7000 and beyond
Morette
16th August, 2012, 05:42 PM
Try it and see.
I have some dumps from a few original EGS controllers, but I can't find anything obvious for shift points.
mexanico1971
17th August, 2012, 11:23 PM
anyone have any idea how to make vanos open more early in a lower RPM"s ?!
Cloudforce
18th August, 2012, 11:05 AM
search for "hakentt MS43" at google, its a brave guy who builded a xdf file for tunerpro software for MS43 in softwareversion 430055.
if you can?t find software version 430055 just contact me, i found it.
don?t know if linking is allowed or not: http://forum.e46fanatics.com/showthread.php?t=859760#post13421354
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.