Latest Technomate Softcam Keys *Regularly Updated*

[thijs]

Bulsat @ 39?East Irdeto2 channels only 16.8.12 ok
Canal digitaal NL @ 19.2East irdeto2 Key Down
Rai @13?East 10992 V 27500 Seca ok next key September
AustriaSat Cryptoworks @ 19.2East ok
ORF Digital + HD Cryptoworks @ 19.2East ok
Mezzo 12245 H 27500 @ 13East ok
csat + HD viaccess @ 19.2East ok
Ant 1 europe @ 39East 11052 V 30000 ok
12111 H 27500 Sirius 4 @ 4.8?East Cryptoworks channels only ok
TV Globo Internacional @ 13East ok
thanks to technomatemaker (techsat team)

[thijs]

bulsat update 25/10/12
thanks to technomatemaker
goto latest at bottom of thread

[thijs]

latest tm softcamkeys bulsat update
goto latest botom of thread

[thijs]

bulsat updated 4/11/12
goto latest botom of thread

[thijs]

latest bulsat keys and others c.nl irdeto2 is finished
look for latest at bottom of thread

[thijs]

latest bulsat softcamkeys +others c.nl irdeto2 finished
thanks to technomatemaker (TechSat TEAM)
check for latest at bottom of thread

[an8nd]

thanks mate, will this work for tm 5402 hd, and are these also know as clines? Cheers

[Manic01]

Yes and no.

[an8nd]

thanks for your reply. In that case i am very confused, what exactly are softcam keys?

[Manic01]

Keys in a softcam.
c lines are card sharing.

[an8nd]

Understood. So what exactly are softcam keys?

[thijs]

latest bulsat softcamkeys +others c.nl irdeto2 finished
thanks to technomatemaker (TechSat TEAM)
+skylink @ 23.5 east
check latest at bottom of thread

[thijs]

Bulsat @ 39?East channels only Irdeto2 19/1/13 ok
Rai @13?East 10992 V 27500 Seca ok next key February
Sky Link SD + HD @ 23.5East Cryptoworks ok
AustriaSat Cryptoworks @ 19.2East ok
ORF Digital SD + HD Cryptoworks @ 19.2East ok
Mezzo 12245 H 27500 @ 13East ok
Csat + HD viaccess @ 19.2East ok
Ant 1 europe @ 39East 11052 V 30000 ok
12111 H 27500 Sirius 4 @ 4.8?East Cryptoworks channels only ok
TV Globo Internacional @ 13East ok
thanks to technomatemaker (techsat team)
keys changed check latest end of thread

[vuduo1903]

will these work with all softcams or only some?

[thijs]

Bulsat @ 39?East channels only Irdeto2 29/1/13 ok
Rai @13?East 10992 V 27500 Seca ok next key February
Sky Link SD + HD @ 23.5East Cryptoworks ok
AustriaSat Cryptoworks @ 19.2East ok
ORF Digital SD + HD Cryptoworks @ 19.2East ok
Mezzo 12245 H 27500 @ 13East ok
Csat + HD viaccess @ 19.2East ok
Ant 1 europe @ 39East 11052 V 30000 ok
12111 H 27500 Sirius 4 @ 4.8?East Cryptoworks channels only ok
TV Globo Internacional @ 13East ok
Thanks to technomatemaker (tech sat team)
All working at time of posting

[feikuk]

have these keys changed, not clearing on my tm 5302

[dick b]

have these keys changed, not clearing on my tm 5302

heres todays softcam

[casper100]

not clearing csat hd channels on 19.2e

[dick b]

not clearing csat hd channels on 19.2e

never has done

[mll]

hi there im new to this i need some help with setting up tm5402 . i know how to upload patch and addons but dont how to do the csinfo

thanks

[excollier]

I haven't updated my Bulsat softcam for a month or more, and it's still clearing, on a TM 5200D+ Super. How or why is this?

[dick b]

heres latest softcam lads tested and working

[galinic2]

Hi Is there a latest tmsoftcamkey? thanks

[dick b]

just a bump as still the latest

[ayan]

Thanks,fantastic.missed the man everton game cause i couldnt get this earlier.
is who is showing man u vs madrid?

[Carew6]

Supposed to be on Puls4 on 19.2?E , open with keys.

[digicon]

Tested:

4.8? East Cryptoworks channels Working
13? East Rai Channels & Tv Globo + Mezzo Channels Working
19.2? East ORF Digital SD & HD Cryptoworks + Csat Viaccess Channels Working
23.5? East SkyLink SD & HD Channels Working
39? East Iderto2 Channels Working ( All Main Channels ) Working

Regards

[dick b]

latest softcam 20/2/2013 tested and working

[digicon]

Tested:

4.8? East Cryptoworks channels Working
13? East Rai Channels & Tv Globo + Mezzo Channels Working
19.2? East ORF Digital SD & HD Cryptoworks + Csat Viaccess Channels Working
23.5? East SkyLink SD & HD Channels Working
39? East Iderto2 Channels Working ( All Main Channels ) Working Bulsat Updated


Thanks to technomaker

[digicon]

Last Change from 02.03.2013

13? East RAI (Update)


Tested:

4.8? East Cryptoworks channels Working
13? East Rai Channels & Tv Globo + Mezzo Channels Working
19.2? East ORF Digital SD & HD Cryptoworks + Csat Viaccess Channels Working
23.5? East SkyLink SD & HD Channels Working
39? East Iderto2 Channels Working ( All Main Channels ) Working


This Softcam.key file now comes with a Channel list just for the Channels open with softcam, the list is for HD receivers and will work on Technomate, DrHD, Blade 7000, Clarke Tech Receivers that accept a .ndf channel list

The Favorites are as Follows: 39? East, 23.5? East, 19.2? East, 16? East, 13? East, 4.8? East

A Big thanks to mdt who provided the channel list and the list of channels open with softcam.


Regards

[Nutsandbolts]

Hi In case you did not know but RAI on hotbird have this week switched off SECA-MEDIAGUARD system. To view channels you will need an official Tivusat card. You can of course still view channels when FTA but not when scarmbled. The current keys will only open RAI SPORT 1 and 2 when scrambled according to info.

Regards.

[althom40]

Hi In case you did not know but RAI on hotbird have this week switched off SECA-MEDIAGUARD system. To view channels you will need an official Tivusat card. You can of course still view channels when FTA but not when scarmbled. The current keys will only open RAI SPORT 1 and 2 when scrambled according to info.

Regards.
============================================Yes Was wondering what happened to RAI. Any other alternatives apart from a Tivu card?

[Nutsandbolts]

Hi. We can wait and see if RAI may change their minds like they did a couple of years ago after many protests across Europe but i doubt it as RAI have just spent millions on acquiring live Brazillian football and need to get some money back. You can go down the c/s route which cannot be discussed on this forum. I have been informed recently that there are many dodgy Tivusat boxes and cards around. The only way to get Tivusat is if you have a relative or friend or yourself that has an Italian address and fiscal code otherwise the card cannot be activated . If anyone is thinking of buying Tivusat in the UK please be aware of the conditions that apply. I can also tell you that the card works ok in other recivers like TM5400's as i have set them up for a few customers of mine who bought Tivusat in Italy and brought them back to UK.

Regards

[digicon]

Update to Softcam Channel list

Hi All,

Due to some changes to channels being dropped from certain encryptions i have now updated the Softcam Channel list to reflect the changes.

I have also added a Favorites List for 28.2? east as well Credit for this goes to Chopps

So the Final list will have the following listed as Favorites

39? East, 23.5? East, 19.2? East, 16? East, 13? East, 4.8? East,

28.2? East Favorites Entertainment, Lifestyle, Movies, Sports, News, Kids, Music, Documentary's.

Thanks to all those involved and a special Thanks to MDT for being the Guinea Pig


Regards

[padraig102]

will this work with the 1000 series?

[digicon]

will this work with the 1000 series?

Yes it will depending on what patch you have installed

[padraig102]

Yes it will depending on what patch you have installed

this one = Phantompatch-TM1000D@D+_316p_02-12-2011

[bosun1]

hi guys i can seem to open bulsat using phantompatch312 no bother but using 316 patch cant open it for some reason but 316 patch can open 19east fine.

[digicon]

hi guys i can seem to open bulsat using phantompatch312 no bother but using 316 patch cant open it for some reason but 316 patch can open 19east fine.

Its a little trial and error on the older technomates to find a patch that will open everything the softcam does

[bosun1]

it is a bit of pottering around with patches&softcams but it is worth it in the end thanks to this forum.

[podgey3874]

Update to Softcam Channel list

Hi All,

Due to some changes to channels being dropped from certain encryptions i have now updated the Softcam Channel list to reflect the changes.

I have also added a Favorites List for 28.2? east as well Credit for this goes to Chopps

So the Final list will have the following listed as Favorites

39? East, 23.5? East, 19.2? East, 16? East, 13? East, 4.8? East,

28.2? East Favorites Entertainment, Lifestyle, Movies, Sports, News, Kids, Music, Documentary's.

Thanks to all those involved and a special Thanks to MDT for being the Guinea Pig


Regards

am i correct in thinking that if i download this channel list all channels should work as mine dont am i doing something wrong do i need to download latest softcam keys and can i donwload use useing the tecnomaker

[althom40]

OK We are all still here. regards

[popol40]

Many thanks for the lates sofcam key file , can i use this file for my tm 6900 HD Combo.

Regards

[popol40]

Please ca any body help me, i have a TM 6900 HD Combo and i no longer catch "KABEL EINS CLASSICS" since a few days , i have try all the softcam keys file and no one work.
Many thanks for your help.
Sorry for my bad English.

Regards

[Nutsandbolts]

Hi Devilfish...thanks for your comments. Improvements are always welcomed.

Regards

[Nutsandbolts]

Please ca any body help me, i have a TM 6900 HD Combo and i no longer catch "KABEL EINS CLASSICS" since a few days , i have try all the softcam keys file and no one work.
Many thanks for your help.
Sorry for my bad English.

Regards
Yes i believe problem is because keys for Austriasat are down ie no Sportdiigital, no Hustler or Dorcel etc etc.

Regards

[popol40]

Yes i believe problem is because keys for Austriasat are down ie no Sportdiigital, no Hustler or Dorcel etc etc.

Regards

Many thanks for your answer.
Did you think that in a few days a corrected softcam key file will come out?
Regards

[Nutsandbolts]

Hi. I be honest with you and say that new keys may not come out anymore from what i heard. A few years ago when keys went down the new keys were posted straight away( a bit like Bulsat at the moment). I have been told that there are a number of keys which are known but not made public. We have to wait and see what develops but at the moment its pretty bleak.

Regards.

[digicon]

Hi. I be honest with you and say that new keys may not come out anymore from what i heard. A few years ago when keys went down the new keys were posted straight away( a bit like Bulsat at the moment). I have been told that there are a number of keys which are known but not made public. We have to wait and see what develops but at the moment its pretty bleak.

Regards.


The Keys are out and are working fine in Linux receivers the problem seems to be is implementing them into the TM softcam so for the moment its a wait and see if they can make this happen.

I know that mdt has been experimenting with the key bt cannot get it to work as it should in the TM box

[Nutsandbolts]

Hi. Thanks digicon for reply. Problem is that channels are fast disappearing for whatever reason and it would be nice to have a new patch or two.

Take care.

[Nutsandbolts]

Hey peeps. New keys for Sportdigital, HUSTLER etc on 19.2 east.

Enjoy

[popol40]

Hello, many thanks to Nutsandbolts and digicon for your answer, taht seam very bad fot the future for non Linux receivers.
Regards to all of you.

[digicon]

Hello, many thanks to Nutsandbolts and digicon for your answer, taht seam very bad fot the future for non Linux receivers.
Regards to all of you.

New softcam key file wit updated sport digital available here thanks to mdt: http://www.digital-kaos.co.uk/forums/f120/sportdigital-326494/#post1913524

[johnwilliam1]

where is the latest softcam, if this is the right section i cant see it

[digicon]

Just in case anyone else asks here is the latest softcam in the correct section

[rigsby71]

where is the latest softcam, if this is the right section i cant see it

always in this thread, see previous pages.

[dick b]

where is the latest softcam, if this is the right section i cant see it

here it is

[popol40]

Hello to all of you , many thank for the late sofcamkey file, it clear my problem concerning the receiving of Austria channels:
Kabel eins classics, Huster, and Planet.
But please where is the right place in the forum for downlolading these file, i supose, the last one a been put here because johnwilliam1 ask where the file are.
Many thanks for these information.
Rgards to all of youi

[digicon]

TM Softcam key Thanks to technomaker

**Update**

Bulsat Key Update 23/03/2013


Keyfile works on Technomate, Blade, DrHD, Clarke Tech Receivers


Regards

[Emsley]

Will this work on TM 5400?

[digicon]

Will this work on TM 5400?


Yes it will, Please remember it only opens the softcam channels and nothing else

[aykorp]

Can we enter the keys manually?

[dick b]

yes you can just open the softcam with "notepad" but why bother?

[Nutsandbolts]

Can we enter the keys manually?
Yes you can .
Regards

189415

[digicon]

TM Softcam key Thanks to technomaker

**Update**

Bulsat Key Update 01/04/2013


Keyfile works on Technomate, Blade, DrHD, Clarke Tech Receivers


Regards

[85360]

New to the forum, but its great to see all the work to keep this receiver going. Will this softcam work alright with Phantompatch-TM6900HDSuper 152p? Is there a list anywhere as to what this softcam unlocks?
Thanks.

[digicon]

New to the forum, but its great to see all the work to keep this receiver going. Will this softcam work alright with Phantompatch-TM6900HDSuper 152p? Is there a list anywhere as to what this softcam unlocks?
Thanks.

Yes it will work with your receiver i am sure there is a post somewhere by MDT who did a detailed list of what is still open with the softcam file. No matter all credit to MDT for the list

[Popsy08]

oops sorry my bad!

is there a tutorial on how to transfer keys on to receiver box?

[Popsy08]

Im a newbie to all this and was wanting to know how to enter these keys manually?

I have a DM800 HD

[digicon]

Im a newbie to all this and was wanting to know how to enter these keys manually?

I have a DM800 HD


Thses keys herer will not work on the DM800 they are in a different format you need to head over to the Enigma2 section and find the softcam keyfile in there

[digicon]

TM Softcam Thanks to technomaker

**Update**

Rai 13? east 04/04/13

Austriasat 19.2? east 09/04/13


Regards

[fitz854]

Are there patch files for different satelites??

[digicon]

Are there patch files for different satelites??

No they are all combined into one patch, you can create your own with Technomaker which is available if you do a search on google for it.

[d191405x]

how do you use these?

[digicon]

how do you use these?


you download the file unzip it from the folder place that onto a usb stick and upload onto your receiver, That is if you do have a compatible Technomate receiver

[d191405x]

how do i open this, is ie ok or firefox
keeps saying registration entries ?

[digicon]

Softcam thanks to Technomaker


**Update**


TnT Sat 19.2? east Key Update 11/04/2013

Bulsat 39? east Key Update 11/04/2013

Austriasat 19.2? east Key Update 12/04/2013


Regards

[d191405x]

what does it open??????

[digicon]

what does it open??????

Read the First post and download the text file and that will tell you what it opens

[mdt]

what does it open??????

keys are old and have changed now,regards mdt

[d191405x]

where are they now?

[mdt]

where are they now?


heres the new key,regards mdt

[Nutsandbolts]

Hi. For those not sure what channels opened here are keys and list of channels

Enjoy.

192869

[Nutsandbolts]

Hi. if not already posted here are the latest(22/04/2013) Bulsat keys.

Regards

194421

[mdt]

heres the softcam from technomaker,regards mdt

[galinic2]

Hi, is there a new softcam update? thanks

[digicon]

Softcam Thanks to Technomaker

**Update**


Bulsat 39? east 22/04/2013 Now and Next key

Various other Biss Keys on 9? east, 16? east, 8? west etc...

Regards

[Nutsandbolts]

Hi If not already posted here are latest Bulsat keys(12/05/13) for manual CAS menu entering:

[mdt]

heres the softcam, thanks to technomaker. regards mdt

[digicon]

@mdt & @NutsandBolts & @dickB


I have now merged all these Softcam keys into one thread as it seems pointless having separate threads for the same keys whether in text format or USB upload format.

Can we now please keep all new key posts to this one thread for the future

Hope you dont mind Thank you

Regards

[popol40]

TM Softcam key Thanks to technomaker

**Update**

Bulsat Key Update 01/04/2013


Keyfile works on Technomate, Blade, DrHD, Clarke Tech Receivers


Regards
Hi, thanks again for all the Tm key file, as it is said we can open french TNTSAT programs, do i need the special TNTSAT card for receiving these channels, if it is the case , i was told that these cars are working only with specific decoder?many thanks for your answer?

[mdt]

Hi, thanks again for all the Tm key file, as it is said we can open french TNTSAT programs, do i need the special TNTSAT card for receiving these channels, if it is the case , i was told that these cars are working only with specific decoder?many thanks for your answer?

firstly which box are you using? the tntsat channels open on most boxs patched with 3rd party firmware or via gbox/oscamymod on E2 boxs. start a new thread in your relevent box section or general sat section describing your box,dish size and location and someone will be able to help/advise you. regards mdt

[popol40]

firstly which box are you using? the tntsat channels open on most boxs patched with 3rd party firmware or via gbox/oscamymod on E2 boxs. start a new thread in your relevent box section or general sat section describing your box,dish size and location and someone will be able to help/advise you. regards mdt

Many thanks for your answer, before opening a new thread, i give you the response to your question my box is t: Tm9600Hd Combo super +,Phantom patch 752, pluss the up to date keys.I have try connect on the frequency for TNT SAT and the box doesn't decode the channels, as it is wrote that the keys opens the TNT SAT i thing i must use some other way to decode these channels.Regards

[mdt]

22-5-2013

B***** NOW AND NEXT


THANKS TO TECHNOMAKER


regards mdt

[popol40]

Hello mdt many thanks for your reply , but was "B*****NOW AND NEXT" means, i am sorry i a am french and don't know all thesubtlety of English language.regards.

[excollier]

It's ok, use it.

[finger]

Hi,
thank you for your post.
I have the same question about the TNTsat, I have a TM6900 super combo, 100cm motorised dish.
the same phantom 752 and the last "SoftcamMotor.zip". by the way why did the name change, from softcam?
did I miss something?

[excollier]

No, this softcam just contains more satellite positions for a motorised system, rathe than just a couple of sats.

[finger]

thank you, if I understand well, it gives new positions for satellits and has no softcamcodes in it? I had the impression it help to decode some staff.

[digicon]

thank you, if I understand well, it gives new positions for satellits and has no softcamcodes in it? I had the impression it help to decode some staff.

It is a softcam and when loaded in the appropriate receiver will unlock various channels, the softcam file works on satellites form 45? east to 45? west, It will not open everythinh on every satellite the range i gave you is just that a range to & from that the file covers. If you want to see what opens then have a look at this post here: http://www.digital-kaos.co.uk/forums/f11/whats-open-softcam-emulators-332141/

[mdt]

2-6-2013

B***** NOW AND NEXT

THANKS TO TECHNOMAKER

regards mdt

[IPA]

Hi guys, I've just purchased a 5402 super + and need to know how to put the softcams on it. Do I need to load Phantom Patch first or is there a newer patch available?

[digicon]

Have a look here at the guide : http://www.digital-kaos.co.uk/forums/f75/noobs-guide-patching-your-technomate-7310/ for the 5402 it will more than likely be an M2 version if the box is brand new Patch is here: Download center (http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=24)

[d191405x]

Thanks all sorted!

when i goto download page and click to download, it opens as some sort of text file!
what am i doing wrong ?

[Carew6]

12-06-2013

Thanks to technomaker.


203408


..just click on this Zip file and it should download, then Unzip it and you should have a .key file to load to usb stick and then to receiver.

[digicon]

Softcam Thanks to Technomaker

**Update**


Bulsat 39? east 12/06/2013 Now and Next key

Chelsea TV Biss Key on 10? East 11/06/2013

Regards

[digicon]

this one dont even show up ?


A Little more information is required as i have just tested the file i uploaded by re-downloading it and putting it into a technomate receiver via USB no problem

[saxifrage]

Have downloaded latest softcam, unzipped to usb stick, but my TM6800HD does not see the file on the stick. Can anyone help please? I've tried a couple of different softcams with same result.

[digicon]

Have downloaded latest softcam, unzipped to usb stick, but my TM6800HD does not see the file on the stick. Can anyone help please? I've tried a couple of different softcams with same result.


Is your 6800HD running patched firmware if not then there lies your problem

[saxifrage]

Thanks for that. I'm running official firmware. I used to get firmware from another site, but it's not available anymore and I don't know where to find it now.

[saxifrage]

Thanks again. I found an old phantompatch and all is working.

[musman]

Is this the latest Softkey for Technomate TM-5300 D+ super for the date 21/06/2013?
also where can i find the patch.

[digicon]

Is this the latest Softkey for Technomate TM-5300 D+ super for the date 21/06/2013?
also where can i find the patch.


Use the one from here: http://www.digital-kaos.co.uk/forums/f120/latest-technomate-softcam-keys-regularly-updated-286853/index8.html#post1999093 there has been no major changes on the softcam and that is why none have been posted

[mdt]

22-06-2013

B***** NOW AND NEXT

ALL OTHER KEYS OK APART FROM TNTSAT@19.2EAST

THANKS TO TECHNOMAKER

regards mdt

[digicon]

**Update** **02/07/2013**

Bulsat Now and Next Key


Thanks to Technomaker

[mdt]

17-7-2013

UPC@1WEST SOFTCAM

this softcam is for use with the TM5302HD/5502HD/TM8000HD only atm

patches are in the download section

regards mdt

[mdt]

20-7-2013

B***** NOW AND NEXT

thanks to @technomaker

regards mdt

[mdt]

31-7-2013

B***** NOW AND NEXT

thanks to @technomaker

regards mdt

[mdt]

10-8-2013

B***** NOW AND NEXT

thanks to @technomaker

regards mdt

[excollier]

Here's the latest, thanks to a post on another forum.

215245

[excollier]

Here you go. Thanks as usual to the source.

[excollier]

Here's the latest for B****t, thanks to the usual source

[digicon]

Technomaker Softcam key File

Now includes keys for the Following

0.8? West UPC Direct

7.0? East Digiturk

19.2? east TNT Sat ( Finally Returned )

All other keys up to date

Please be advised UPC,Digiturk,TNTsat keys may only work on some of the newer Models with the latest patched firmware

[digicon]

**Update**

Technomate Softcam Keys dated 20/09/2013

Changes:

NBA Pool Europe 10? east Biss Key
NBA TV Europe 10? east Biss Key
ESPN 15? west Biss key (labelled as Syndication & Carribean)
SRTV Feed 16? east Biss Key
Tele5 9.0? east Biss key


Bulsat Now and next key 39? east

Thanks to technomaker

Please be advised again that this softcam contains keys for the remaining channels on UPC direct 0.8? west and Digiturk 7.0? east that will only work on certain patched models of Technomate namely 5302,5402,5502,6800,6900,8000

Any problems relating to Softcam keys could we all please use the discussion thread here: http://www.digital-kaos.co.uk/forums/f120/technomate-softcam-keys-discussion-thread-369046/

Thank you

[excollier]

Here's the next update, thanks to powercisco

[digicon]

**Update**

Bulsat Now and Next Key 39? east

Plus other updates.

[digicon]

**Update**


Bulsat Now and Next Key 39? East

Plus other minor updates

To open the newer packages such as UPC Direct 0.8? west and Digiturk on 7? east then you must have the following:

For owners of the TM5402HD Mark 1 for the above packages it is advisable to run Patch 135p - Mark 2 Owners then Run Patch 109p

TM5302/5502/8000 Run the latest Firmware patch as well, TM6800/6900 Again run the latest patch

To find out what channels are available via Emu and Keys then have a look at mdt's text file located here: http://www.digital-kaos.co.uk/forums/f11/whats-open-softcam-emulators-332141/#post2123006

Thanks again to Technomaker Team

[mdt]

31-10-2-13

B***** NOW AND NEXT

ALL OTHER KEYS OK

THANKS TO @TECHNOMAKER

regards mdt

[mdt]

14-11-2013

UPDATE..

B***** NOW AND NEXT

ALL OTHER KEYS OK

THANKS TO @TECHNOMAKER

regards mdt

[digicon]

**Update**

Bulsat now and next key 39? east 24/11/2013

Othe Biss key Updates

Thanks to technomaker

[mdt]

5-12-2013

B**SAT NOW AND NEXT

thanks to all concerned

regards mdt

[mdt]

16-12-2013

B**SAT NOW AND NEXT

thanks to all concerned

regards mdt

[mdt]

26-12-2013

B**SAT NOW AND NEXT

THANKS TO @TECHNOMAKER

regards mdt

[digicon]

05-01-2014 **Update**

Bulsat 39? east Now and Next key

TnTSat 19.2? east New Key

Plus various others, Apologies for the late arrival

Regards

[mdt]

15-1-2014

B***** now and next

thanks to @technomaker

regards mdt

[mdt]

2-1-2014

B**sat bnow and next

thanks to @technomaker

regards mdt

[mdt]

17-2-2014

B***** NOW AND NEXT

THANKS TO @TECHNOMAKER

regards mdt

[mdt]

8-3-2014

UPDATE

B***** NOW AND NEXT

THANKS TO @TECHNOMAKER

regards mdt

[mdt]

18-3-2014

B***** key updated

thanks to @technomaker

[mdt]

24-3-2014

ADDED SRG@13EAST

THANKS TO @TECHNOMAKER/TMCOMMUNITY

regards mdt

[mdt]

8-4-2014

B***** KEY 03/06

THANKS TO ALL CONCERNED

regards mdt

[mdt]

18-4-2014

UPDATE..

B***** KEY 02/04

THANKS TO ALL CONCERNED

regards mdt

[mdt]

6-5-2014

B***** KEY 03/06

THANKS TO ALL CONCERNED

regards mdt

[mdt]

23-5-2014

UPDATE..

B***** KEY 01/02 SERVICE KEY

THANKS TO ALL CONCERNED

regards mdt

[mdt]

2-6-2014

B***** KEY 03/06

THANKS TO ALL CONCERNED

regards mdt

[mdt]

12-6-2014

UPDATE..

B***** KEY 02/04

T**SAT DOWN

THANKS TO ALL CONCERNED

regards mdt

[mdt]

23-6-2014

UPDATE..

B***** KEY 03/06

T**SAT DOWN

THANKS TO ALL CONCERNED

regards mdt

[mdt]

12-7-2014

B***** KEY 03/06

THANKS TO ALL CONCERNED

regards mdt

[mdt]

23-7-2014

B***** KEY 02/04

THANKS TO ALL CONCERNED

regards mdt

[digicon]

**Update**

Latest Softcam

[digicon]

** Update ** 13/08/14

Bulsat 39? east Updated

[mdt]

4-9-2014

B***** KEY 02/04

THANKS TO ALL CONCERNED

regards mdt

[mdt]

B***** key

thanks to @technomaker

regards mdt

[digicon]

** Update 21/10/2014 **

SRG SSR SD-HD viaccess 023800 @ 13East 10971 H 29700 -11526 H 27500 - 12399 H 27500 ok
TMT Sat SD @ 19.2East viaccess 030B00 ok
Bulsat @ 39?East channels only Irdeto2 04 keys now Active 21/10/14 + 06 Next keys ok
Hotbird @ 13?East RAI SPORT 1-2 11804 V 27500 Seca ok
AustriaSat Cryptoworks @ 19.2East ok
ORF Digital SD + HD Cryptoworks @ 19.2East ok
Sky Link @ 23.5East Cryptoworks ok
SIC INTERNACIONAL viaccess @ 16East 12568 H 3703 ok
Mezzo @ 13East 12245 H 27500 ok
RTL CH @ 13East 11054 H 27500 ok
Ant 1 europe @ 9East 12148 V 27500 ok
TV Globo @ 13East 11585 V 27500 ok
Digiturk @ 7East SD Cryptoworks ok
@ 0.8west UPC Cryptoworks remaining active channels > HBO Comedy - VH1-Europe -Universal ch ok

[mdt]

31-10-2014

B***** NOW AND NEXT

THANKS TO ALL CONCERNED

regards mdt

[mdt]

B***** NOW AND NEXT

THANKS TO ALL CONCERNED

regards mdt

[mdt]

B***** SERVICE KEY ACTIVE 01/02

THANKS TO ALL CONCERNED

regards mdt

[mdt]

9-1-2015

B***** KEY 06

THANKS TO ALL CONCERNED

regards mdt

[ibz_123]

Hi All

thought i'll share this with you all which my mate as emailed me and this worked with the latest channel listing for TM5402

happy downloading guy

[digicon]

**Update** 31/03/2015

39? east Bulsat keys Updated


Thanks to all Concerned

[digicon]

**Update** 10/04/2015

Bulsat Now & Next

Thanks to EMPB for the softcam

[digicon]

**Update** 21/04/2015

Bulsat Now & Next

Thanks to EMPB for the softcam

[digicon]

**Update** 11/06/2015

39? East Bulsat Now & Next

Thanks to all concerned

[digicon]

**Update** 24/06/2015

39? east Bulsat Now & Next

Thanks to all concerned

[digicon]

**Update** 10/07/2015

39? east Bulsat and probable next keys

[digicon]

**Update** 31/08/2015

39? east Bulsatcom

[digicon]

**Update** 15/05/2016


Please remember if your using the newer type Technomate TM F3/5 or 5402HD M3 receiver these keys will overwrite any Pvu key settings you may have stored

[telveskid]

Am using a TM-1500 will that be okay ?

Regards

[digicon]

**Update** 18/07/2016

[digicon]

**update** 22/10/2016

[digicon]

**Update** 07/11/2016

[digicon]

**Update** 30/12/2016

[digicon]

**Update** 07/02/2017

[mivojo]

Hi Digicon,
I have a few questions about trying to connect my TM 5402 HD M3 CI super +. Please help.
To keep a long story short: this is what I need to know and what I have done and tried so far:
The receiver must be reset to ' company reset' and all channels should be deleted (Cleared) beforehand. Then it should be possible to upload
the firmware (Patch) from the internet Forum (#########)and save the unpacked relevant file on a USB stick. The compact file can be unpacked using explorer? Am I OK, sofar? Then the file can be installed via the front USB port by pressing the usb button on the remote. This in the point where, in my case, the Receiver rebooted, and the patch was successfully installed. Now the same procedure can be done with the keys, softcam (BISS keys)but I would rather put them in manually via remote 8280. For some reason I don't seem to be able to do that. Is there a trick here? What code oder App do I use here to enable the keys to be installed. Windows 10 asks for an app., but I'm not sure if explorer is readable for the receiver. What could I open the file with other than explorer? Anyway, if you confirm that I am on the right road that would help me very much. Oh I must add that my set up is a 150cm dish pointing to Intelsat 27.5 W. From Germany. I get loads of coded and uncoded programs, if I scan at random, but the
ITV and BBC programs don't seem to want to work on my receiver.
I'd be grateful for a few tips.
I'm a newbie and an expat, so I hope these facts don't turn you off.
Keep up the good work your doing.
Michael

[digicon]

Hi,

I have had to remove the reference to the so called 'Other Forum' due to the Forum rules please have a read when you get a chance, anyhow the latest patch is already uploaded to this forum here is the LINK (http://www.digital-kaos.co.uk/forums/downloads.php?do=file&id=3572)

You can also download the latest patched firmware directly from the box itself by going to Menu - Entertainment - TM online and then downloading and installing the correct patch for your receiver model.

Once your receiver is patched you only need to enter 8280 into the receivers remote control on the channel you are trying to clear with the Biss key and then enter the key press exit it will ask you to save press OK job done. on the biss channels on 27.5 west you have to do this procedure for every single channel, Obviously as you have already entered the key say on line 1 then just point every channel to line 1 and save job done

for the BISS key you open the softcam.key file with a text editor Notepad++ is preferred

Regards

[mivojo]

Hi,
Thank you for your reply.
Sorry about having to remove the reference to other forum. I'm not very familiar with this kind of communication as a newbie. (Haven't got round to reading regulations properly, sorry)
I seem to have done the right thing at setting up so far, because when I go to BISS on the menu and press 8280 codes come up. I haven't tried 8281 yet. However I'm not sure if I am lined up properly with the correct satellite because I haven't received blue or orange signal. Will I only get this if the channels are cleared? Or will the signal be clear on the receiver when I adjust the dish?
Would you mind explaining step by step how to open the channels one by one again? I'm not sure what you mean when you say "point each channel at line 1". There are 100 bis codes with 32 digits each. I can alter these if necessary, but the keys I looked for on the internet only have 12 ro 14 digits.
I have 146p version. will I need to reset and start again?
I'm so grateful for your support. Keep it going.
Bye.

[digicon]

Hi mivojo,

You need a Strong signal first before the BISS Key will work, the screen will remain Blank until the BISS key is inserted but as you say if you dont have a signal at the moment then you will not get very far.

Do Not concern yourself with the 8281 menu as you are only concerned with the BISS entry system which is located on 8280, and as you rightly point out you have around 100 BISS lines so you can enter the key on any one of those lines.

My suggestion would be keep it simple and just enter the BISS key on the very first line 1. which as you will notice has 32 digits like this 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.

The biss keys on the Technomates only require the first 16 digits entry as the key in its 32 digit form is just a repeat of itself twice so you only need to enter the first 16 digits and leave the last 16 digits as Zero's like this>

11 22 33 44 55 66 77 88 00 00 00 00 00 00 00 00

when entered like this all you need to do is press the EXIT button and it will ask you do you want to save press OK, then as long as you have a signal on the BISS channel you are on and have entered the Key correctly it will open, then you have to goto the next channel which will be Blank but should have signal press 8280 on the remote control highlight line 1 in the biss menu and press exit it will again ask you to save and that channel will open repeat this for every channel on 27.5 west you want to open.

I must stress you do need a signal on this satellite so your first priority is to get the strongest signal you can on 11495 V 44100 27.5? West

Regards

[mivojo]

Thank you digicon. Very helpful advice. I'm not sure whether the direction for the satellite is correct. Modern TVs today have built in receivers which are set at Astra 19.2, although the dish is set at Astra 28.5. I thought I should have to change the satellite on the list so that it complies to the dish is the right direction, but I have to change the tp perhaps to get a signal. Hope I'm making myself understood. Could be I'm talking rubbish.
Bye for now.

[digicon]

**Update** 29.05.2017

[digicon]

**Update** 31/08/2017

[digicon]

**Update** 12/10/2017

[Roy Suryadwiananda]

Please help, softcam key for Asia Pasific satelite, thank you.

[dist]

Hi,

I get logged out each time I try to download the SC key and won't let me login. Please help.

Thank you in advance.

[digicon]

**Update 10/01/2018**

[digicon]

**Update 26/02/2018**

Bulsatcom 39° East

[digicon]

**Update 25/04/2018**


Bulsatcom 39° East

[digicon]

**Update 20/11/2018**

Bulsat 39° east

[digicon]

Glenn_911TM Softcam All / 17.09.2019


For Technomates Series 1000, 3000, 5200, 5300, 5400, 5600, 6800, 6900, 7100 and Super


Update:


Bulsatcom 39°E
Biss