black hole 1.7.6 cccam ?!

[joetwizzy]

How do you install cccam on the new blackhole 1.7.6? It isn't in the add ons menu.

I managed to set cccam up using tsmenu on vix image but I want to install it without tsmenu if i can.

Any help?

[benny/9]

How do you install cccam on the new blackhole 1.7.6? It isn't in the add ons menu.

I managed to set cccam up using tsmenu on vix image but I want to install it without tsmenu if i can.

Any help?
************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

[evam1]

What is the "DCC"? You mean ftp like filezilla?

[Bulld0g]

Dreambox control centre, but yes both use ftp

[belarouf2012]

zip file not working

[benny/9]

zip file not working
******************************************
just tested it and it does download
it looks like your end mate, try a different browser
if your using the internet explorer i find that gives
problems with forums plus i think you could need
more posts before you can download.

[grtmoby]

Thanks benny! why is it recommended to install all the versions. wouldn't one be just enough

[DOUGALMCD]

One would be enough.

[benny/9]

Thanks benny! why is it recommended to install all the versions. wouldn't one be just enough
***************************
one cam is enough but the others give you more choice
and you could need to change the cam in certain circumstances
that we cant go in to here

[sailsy]

Would like to try the black hole image instead of vix which keeps crashing!

Could someone point me in right direction please?

[DOUGALMCD]

You need to say what box you have and is it a genuine one. What vix image are you using? I assume you meant blackhole.

[sailsy]

Sorry original duo using latest version of vix thought id try black hole if i could find image!

Thanks Dave.

[DOUGALMCD]

Try their site they have latest 1.7.7 but I haven't tried it as yet so can't comment on it.

[sailsy]

What's the official site?

[DOUGALMCD]

Vu community.

[digicon]

I am currently running the latest Blackhole 1.7.7 and so far its great even with the hbbtv which works perfectly even though there is nothing in english, You can also find a 1.7.7 lite version as well without the hbbtv but still has latest drivers and new OE kernel.

[sailsy]

Sorted up and running seems a bit more stable than vix up to now!

Still can't seem to get epg working as i would like!

When i press button remote epg does not come up like vix does!

[digicon]

Sorted up and running seems a bit more stable than vix up to now!

Still can't seem to get epg working as i would like!

When i press button remote epg does not come up like vix does!

Hate to have to say it but thats the good thing about Vix the epg and button layout, next best EPG for BH is Coolmans Guide and then Multiquickbutton to remap your buttons how you like. Both available via the download servers Green Button then Yellow button.

[sailsy]

No that's fair enough which build number of vix would you recommend?

[benny/9]

just be careful with the latest BH images
there are three versions of the bh 177 to
sort problems and a version with no hbbtv.
for me the best and very stable version is
the bh 172 media tree image

[digicon]

No that's fair enough which build number of vix would you recommend?


Well not heard any reports about problems on the latest build so perhaps give that a whirl, Remember to do a full backup of your Blackhole just in case you dont like it.

[level370]

Works also with 1.7.8, thanks

[zorro7000]

anywhere...

I am new, and I need more infos :(

[sebsolal]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

thanks mate

[makomako1]

tnx mate...

[matthewp150]

Thanks for this info

[bahramplus]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use
hi i wanna intal cccam on my vu+solo black hole 1.7.6
finally i found your post. let me do this guys:heeeelllllooooo:

[ops]

Hello
thnaks fo rthi sforum

[digicon]

Hello
thnaks fo rthi sforum

Welcome to DK and with a reply like that I'll have what ever your drinking

[lambertlambert2003]

Thanks :beerglass::beerglass::beerglass::beerglass:

[konatist]

Will these work on blackhole 1.7.9? Getting my solo2 tomorrow, and this is the bit I'm struggling on we'll so far the rest has been a good read

[digicon]

Will these work on blackhole 1.7.9? Getting my solo2 tomorrow, and this is the bit I'm struggling on we'll so far the rest has been a good read

If your referring to the Blackhole E2 Campack then yes they certainly will no problem

[Moejahied]

yeah works fine on a solo2, running on my box no problem

[benny/9]

Will try the file
****************************************
the BH cccam packs will work with every BH image version
on all vu models

[TMO22]

Will this cccam package work on VIX-Image?

[digicon]

Will this cccam package work on VIX-Image?


I think a re-read of the Title Thread may give you a Clue

Blackhole

[bbari]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use


How to cccame for BH 1.7.9 Solo2 ?
How to cccame for BH 1.7.9 Solo2 ?

[mdt]

How to cccame for BH 1.7.9 Solo2 ?
How to cccame for BH 1.7.9 Solo2 ?


ftp the the file into /tmp using filezilla then install via the bh installer(green then yellow). then press blue and start the cam. when you have the cam running get your sea-lion and ftp again into /ect, save and re-start for good measure,regards mdt

[Easty]

Yay just got my Solo2 today :D

Ordered mine today!

Let me know how you get on!

[Taboganist007]

Ordered mine today!

Let me know how you get on!


Yeah I got on fine, I followed the instructions to the letter... what I didn't realise that you have to upload via FTP your cccam.cfg file into the etc folder to get your cccam line details in there so it will work... That had me stumped for ages!

[dell_xps]

Guys this is just my personal opinion, but I think the Vix image is better on the new Solo 2, it displays the channels it's on etc, whereas BH didn't, and the Vix image is just easier to setup/navigate if you are a novice enigma 2 user.
Just my 2 cents worth, try whatever image you want :-)

[digicon]

Guys this is just my personal opinion, but I think the Vix image is better on the new Solo 2, it displays the channels it's on etc, whereas BH didn't, and the Vix image is just easier to setup/navigate if you are a novice enigma 2 user.
Just my 2 cents worth, try whatever image you want :-)


Not sure i understand that Dell mine shows what channel it is on in the display no problem if thats what you mean.

[dell_xps]

Not sure i understand that Dell mine shows what channel it is on in the display no problem if thats what you mean.

Yup when I flashed it with BH it would only show the folder name m8, ie Entertainment etc, I'm better using Vix so maybe just something in the menu that needed changed ?

[Mars Warrior]

Just received my solo2 and currently upgrading to the latest blackhole image. hope the cam works!

[bambi1974]

just about to try with my new Solo2, hope it works!

[Aindriu]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to useThanks a million for that! I am building my first two Vu+Duo boxes this weekend:top:

[Leesaunders]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use
just wonted to say thanks for this info as it has heled me aslo

[cgooding82]

Thanks for the all the info.

[synologic]

I will try it with BH 1.7.9 today on my Solo2. Hopefully it works otherwise i have to buy a CA module for canaaldigitaal.

[townjuju]

Pls guys, how can i setup cccam into blackhole v133, im using dm800 sim2.01 #82

[septicsmurf]

Pls guys, how can i setup cccam into blackhole v133, im using dm800 sim2.01 #82

Sorry mate, you're in the wrong place. This section is for vu+.
You should ask in the dreambox section.

[noar23]

Hi, How can I use CCCam for BlackHole-2.0.1 OE 2 (VU+ Solo)? For previous versions I was using tunisiasat-addons-manager_3.0_mipsel, but it does not work anymore due to new python version.

[digicon]

Hi, How can I use CCCam for BlackHole-2.0.1 OE 2 (VU+ Solo)? For previous versions I was using tunisiasat-addons-manager_3.0_mipsel, but it does not work anymore due to new python version.


Yes you most certainly can all the Cams included in the pack will work

[billywear]

how do i intall and set up ccam on vu solo2 with BH?

[mdt]

how do i intall and set up ccam on vu solo2 with BH?

using Vucc/filezilla install C**am 2.2.1.ipk into /tmp then install in addons then put cfg in /ect,regards mdt

[Roddypiper]

************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

Hi,

After doing as you explained I receive the followning message:
Nothing to install.
You have to Upload a bh.tgz package in the /tmp directory before to install Addons

Please help :)

[digicon]

Hi,

After doing as you explained I receive the followning message:
Nothing to install.
You have to Upload a bh.tgx package in the /tmp directory before to install Addons

Please help :)


Did you reboot your receiver by chance after ou uploaded the tar.gz files if so they will have been deleted, follow the instructions as benny/9 has stated and they should install fine

[Roddypiper]

Did you reboot your receiver by chance after ou uploaded the tar.gz files if so they will have been deleted, follow the instructions as benny/9 has stated and they should install fine

sorry, what is a tar.gz file?

I put the cccams in the temp folder and get the error msg displayed above. :banghead:

It might help for you to know that I am using BH 1.7.9, do I need to upgrade?

[Roddypiper]

Woohoo! got the cams on there now.

Thanks for the info Benny, topman. The only thing I was doing wrong was extracting the files when there was no need. I misread the info (been a long, long day).

Again thanks :) Also to Digicon.

dont suppose I can push my luck and ask what I then do to get the full use of these cams?

[andy91]

Woohoo! got the cams on there now.

Thanks for the info Benny, topman. The only thing I was doing wrong was extracting the files when there was no need. I misread the info (been a long, long day).

Again thanks :) Also to Digicon.

dont suppose I can push my luck and ask what I then do to get the full use of these cams?

Thats the part we cant talk about on here hopefully someone can pm you

Andy.

[Roddypiper]

cheers Andy, fingers crossed x x

[andy91]

cheers Andy, fingers crossed x x

Not got a Vu mate but they are a Enigma box so similar to the Dreamboxes.
Like i say hopefully you will be fine now the hard works been
done.
Good Luck:rock:
Andy

[fishyboy1]

is there a step by step for installing this

[Roddypiper]

Not got a Vu mate but they are a Enigma box so similar to the Dreamboxes.
Like i say hopefully you will be fine now the hard works been
done.
Good Luck:rock:
Andy

Thanks for the info Andy. I can tell you, it aint recommended to do this late at night, after a long day. It seemed I was making good progress, and then I wasn't. Two steps forward, three steps back lol. Thank goodness I have all weekend to make it count ;)

[daisysky]

is dcc dreamboxedit

[daisysky]

have got vu+ solo2 with vix image trying to install cccam do i just follow post 2 thanks

[benny/9]

have got vu+ solo2 with vix image trying to install cccam do i just follow post 2 thanks
**********************************************
you cant install the blackhole cams on a vix image
every image uses it's own cccams they are loaded in
the tmp folder on the vu with the dcc then you use the
remote to install the cccam or cccams from the manual
install in the box menu

[digicon]

have got vu+ solo2 with vix image trying to install cccam do i just follow post 2 thanks


Thanks to Benny/9 for the upload you can find the Vix cams in this post Here: http://www.digital-kaos.co.uk/forums/f191/ts-panel-283787/#post1887196

[zzalabri]

This didn't work with the latest blackhole:manusign:

[digicon]

This didn't work with the latest blackhole:manusign:

What does not work with the latest Blackhole if you are referring to the cam pack that Benny/9 posted then yes they do work 100% if they dont its down to USER ERROR

[knownowt]

I have a vu+ duo with Kernel version:3.1.1 and Firmware version: BlackHole 1.7.3. I've installed Benny's files as advised. I seem to have a lot of new channels and more again if I insert my Sky card - thanks. However, I cannot see any of my subscription channels ie the sports and the movies. Also I get the impression that any of the channels with HD after the name also do not work.

I think I either need to add details of my card into the existing CCcam.cfg file in /etc or add a brand new file named cccam.cfg (all lowercase?). Exactly what I put into the file (Sea Lion or C Line??!) is always skated over in every place I looked so far. Would some generous soul here please post/pm me the necessary info so I can watch those channels with card inserted and also details of what each of the 4 cams files buy for me. I am new to this stuff therefore instructions as clear and detailed as possible would be highly appreciated.

[Bulld0g]

No card share discussion allowed on these forums mate.

[knownowt]

Is using my paid for card "card sharing". I know nothing of card sharing and not asking about card sharing.

I want to know how to watch the channels I've paid for!!

[mdt]

Is using my paid for card "card sharing". I know nothing of card sharing and not asking about card sharing.

I want to know how to watch the channels I've paid for!!



PM SENT. regards mdt

[knownowt]

A thank-you-very-much to you even before I open your pm. I was just about to post that I have it figured out and working after reading the cfg file closely with vi. Let me see what you say, first. Thanks very much.

[DOUGALMCD]

Just press the thank you button which you cant miss on bottom right.

[MaSSe]

I will try Benny's package and see if I can get this working with BH 2.0.1.

[benny/9]

I will try Benny's package and see if I can get this working with BH 2.0.1.
***************************************
just follow the info in with the cam packs
they do work with the 201 image iv'e tested it
but did'nt like the menu so i returned to bh172 image
that i think is the best version,also the cams work all bh image versions

[dyilmaz]

Is it the latest version?


************************************************** ****
first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

[weasel1976]

Hi,
I am new to this, having just bought a VU+ Solo2. Thanks to Benny's instructions I will be attempting to put the cccams on today. If I have any questions no doubt I will be asking.

Lee.

[ha192]

Hi I am new to this forum
Can you please confirm if the file work on vu+ solo2 blackhole image 2.0.2

I will be trying it anyway and if it work i will let you know

[gingeee85]

i have tried following your instruction but it just says no displayable files. any help, vue+ solo blackhole 1.79

[benny/9]

i have tried following your instruction but it just says no displayable files. any help, vue+ solo blackhole 1.79
****************************
i have just downloaded the cam pack and the files are there to use so the problem is at your end mate. if you are using the internet explorer a lot of forums have problems with the ie try using firefox
**************************************
just to add this is how to load the cams

manually install BH cams
******************************
in the folder you will find 4 cam packs you open the folder and take them out
but do not open the cam packs just transfer them to the tmp folder with your
DCC panel,:-- open the dcc and click ftp then in the left hand window find and
double left clicking the tmp folder to open it, then using the arrows between
the windows sent the cam packs to the tmp folder,then close the dcc next go to
the VU and with the remote press green then yellow then on the second line down
manual install bh packages>ok now you can see all the cams you sent to the box
with the dcc now just click>ok on each of them in turn and follow the on screen
info until you have installed all of them,and the manual install panel is empty.
exit the menu and re boot the box and then when it re boots, press blue you can select and change to which cam you want to use

[paulie1972]

I can't see the folder with the cam pack - am i missing something?

[DeanHaines]

i cant see the download with the cam packs either,can someone point me in the right direction please.

[digicon]

For those of you looking for Blackhole cams i am afraid we cannot Host them on this site, On the other hand you could try a Google search and something like this should appear:



http://www.tunisia-dreambox.info/vuplus/cams/Cam-BlackHole/

[j4g3d]

Call me thick please... But i cannot find where to download the cccam.cfg files benny is referring to in post#2 ???

[digicon]

Call me thick please... But i cannot find where to download the cccam.cfg files benny is referring to in post#2 ???

As explained in the previous Post due to Forum Rules: http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/#post2 : this one in particular : Discussions about cardsharing are not allowed, including, but not limited to, cccam, gbox, mbox, etc.

And Explained above the Forum cannot host any Files relating to Cams external links are fine