Chevrolet Montana airbag clear crash

[Positron2200]

Hi Dears. I need clear crash information for this SDM unit:

TEMIC GM 93394074 YP with MC68HC08AZ32 inside.

Regards.

[ChipGods]

Hi Dears. I need clear crash information for this SDM unit:

TEMIC GM 93394074 YP with MC68HC08AZ32 inside.

Regards.

attached.
pass in PM.

[Positron2200]

I will try and post results. Very thanks

[Positron2200]

Dear, the SDM is still locked, i can't erase the dtcs and i have checked 3 times the circuits, is all well. An observation is that i have not diagnostic pulses in the airbag and pretensioner lines.

[ChipGods]

Dear, the SDM is still locked, i can't erase the dtcs and i have checked 3 times the circuits, is all well. An observation is that i have not diagnostic pulses in the airbag and pretensioner lines.

this one must work.

[Positron2200]

Dear, i wrote the last file , but the SDM is still with locked sintoms.

[morfej]

Should be fine as it look very much like other GM temic modules.

br

[mecadriano]

I have same problem with friend montana, need help with link, I UPA if pocivel post image link for UPA

[trevormaharaj]

93 394 074 yp need to clear crash corsa c
hc08az32 oj66d

[walter1]

Hello you had a problem with a Chevrolet Montana airbag module that had locked errors on the driver airbag and pretensioner lines . I want to know if you have recieved the correct or working file for this unit , if so I need to repair a unit like that.

Thanks Walter

[walter1]

Hello , what is the password to unrar the file

[auto80]

m8 post your dump

[soft4ecu]

Hello dears... have the same unit to clear crash.. somebody can help ?.

thanks