PDA

View Full Version : Mpps sw 12.0.0.6 with NOREAD bypass.



camil
20th August, 2012, 07:27 PM
Hi.

I was bored yesterday and i decided to play a bit with one of our tools and Olly. :)

Here you have, special for DK Members. (haha this sounds nice) lol

Just unpack it on C:\MPPS where the original is installed.

I have removed also the initial HW check, so the program will open and you can check if your car/ecu is supported even with the MPPS cable unplugged from the USB, no more MPPS Upgrade dialog.

Nice day ;)
Camilo.

camil
21st August, 2012, 09:37 AM
I used Win7 to unpack and patch it, can anyone confirm it works good in other operating systems too? (Xp, vista...)

Hope you like it.

mihaiservice
21st August, 2012, 09:54 AM
hi
tested on xp sp2 and run w/o hw ;)

thx

mihaiservice
21st August, 2012, 09:56 AM
sorry..i have forgot to attach the screen shot

camil
21st August, 2012, 10:24 AM
Thanks for reporting. Good to know it works in other OSes.

Nio
21st August, 2012, 11:35 AM
Thanks Camil for your job.

mario38
21st August, 2012, 01:56 PM
sorry I mpps clone vers. 5 .. This software has camil bypass what is it?

camil
21st August, 2012, 02:17 PM
sorry I mpps clone vers. 5 .. This software has camil bypass what is it?

It reads the file from the ECU even it is flagged as NOREAD and saves it without encrypt.

mario38
21st August, 2012, 03:42 PM
but if I connect 5 mpps mpps software with hardware bypass 12 can read and write or lock hardware??

camil
21st August, 2012, 04:15 PM
I guess it will not work. You need FW 12 in the interface for this sw to work. Better don't try if you have a clone :) May detect it and **** it up.

gzk
21st August, 2012, 06:56 PM
v12 mcu i different than v5 mcu so i don't think it will work .

lulu2003
22nd August, 2012, 03:12 PM
for V5 there is also a bypass patch (here in the forum).
also some people report that pressing F12 while reading will help??!

daniel guerra
23rd August, 2012, 12:30 AM
I've tested on EDC15P and it works!

Thanks Camil!

jazd
23rd August, 2012, 07:27 AM
Thanks, I'll give it a go!

Cordobe1
18th October, 2012, 03:31 PM
Hi, first thanks for this great contribution!

Second present a problem in my cable V5 does not work: (

Is there any way to make it work? accompanying the PrintScreen

Really appreciate your help!

moky
18th October, 2012, 09:12 PM
i have tested,it Work on V16 too :top:








.

camil
19th October, 2012, 02:20 PM
It needs hw to be updated at least to hw version 12.

euroscan
19th October, 2012, 07:28 PM
when run MppsV12_NOREAD_Bypass_NOHW on win 7 i32 got error " ini file error".

TribleX80
20th October, 2012, 09:19 AM
[QUOTE=moky;1736157]i have tested,it Work on V16 too :top:

Hi

Can you share picture from V16 MPPS and picture from open Software with Serial number please.

Thanks ;)

Cordobe1
20th October, 2012, 11:44 PM
Put the file into the mpps instal folder.

Enviado desde mi HTC Desire usando Tapatalk 2

tuning_made_in_germany
21st October, 2012, 10:36 AM
works perfect on V16.0.0.2, big thanks

camil
18th November, 2012, 04:09 PM
Glad it works fine for you all ;)

Cordobe1
1st December, 2012, 07:55 PM
Thanks!
Works Fine, attach my screen!

Thanks for Share!

motorsportsz
5th December, 2012, 05:02 AM
ok does this fix the error my v12 gives when try reading volvo s40 1.9 cdi edc15.

'waking ecu.. ecu not found' error

enigmauk
5th December, 2012, 12:31 PM
ok does this fix the error my v12 gives when try reading volvo s40 1.9 cdi edc15.

'waking ecu.. ecu not found' error

Try this:

Turn off ignition, press read, switch on ignition.

motorsportsz
5th December, 2012, 12:58 PM
Try this:

Turn off ignition, press read, switch on ignition.

Thanks. I will give it a go today. However it does say in the description
' connect pin 7 of device to pin 11 OBD '
How would I do this?

Sorry OP not hijacking your thread

boubou93
5th December, 2012, 08:15 PM
Thanks camil, very good job ;)

frbooster
4th January, 2018, 02:17 AM
Can anyone send me that.. Camil i cant download this..
Some help please

mancioks
4th January, 2018, 06:30 AM
It works with mpps v16 china or not? Maybe someone tested? :)

morgano
4th January, 2018, 09:09 AM
It works with mpps v16 china or not? Maybe someone tested? :)

Someone did, abd worked for him, read whole thread.

daniel guerra
12th January, 2018, 05:00 PM
Find attached File that was posted by Camil.

Ohvalve
13th March, 2020, 07:02 AM
Doesnt work with my v16 cable, software cant seen cable. What should we do?

morgano
13th March, 2020, 09:31 AM
Doesnt work with my v16 cable, software cant seen cable. What should we do?

I know there is native software patch also for v16. For those whose v12 patch not work on v16 hardware.

mancioks
13th March, 2020, 11:04 AM
There is software that can decode mpps files which are encrypted and small size ;)

SafeDog
16th May, 2020, 01:17 PM
Hi.

I was bored yesterday and i decided to play a bit with one of our tools and Olly. :)

Here you have, special for DK Members. (haha this sounds nice) lol

Just unpack it on C:\MPPS where the original is installed.

I have removed also the initial HW check, so the program will open and you can check if your car/ecu is supported even with the MPPS cable unplugged from the USB, no more MPPS Upgrade dialog.

Nice day ;)
Camilo.

Hello people.

Is this forum still alive?