Just failed my MOT - Need Help with a repair.

[C64]

Today my car failed it's MOT :(

It failed due to...

001 Nearside Front Anti-Roll Bar Linkage has excessive play in a ball joint
002 Offside Front Anti-Roll Bar Linkage has excessive play in a ball joint

Does this mean I need to replace the entire link bar?

I only have a trolly jack, will this be enough to allow access to whatever needs worked on?

[smirnoff_rules]

http://i22.ebayimg.com/04/i/000/a2/3f/8004_1.JPG this is all they r m8 easy job with the wills off

[yamar1]

trolley jack is all you need, as well as some tools, wheel off, you will need to replace both links, there one piece with a ball joint eiter side,, not to bad to do, what car is it?

[C64]

Thanks guys.

How much should i expect to pay from one of these motor factor places?

[smirnoff_rules]

10 quid each m8

[cactikid]

thats cheap if they do them for ur model,also wire brush threads and soak with wd 40 and have new nuts and have a hacksaw to hand if nuts seized.

[yamar1]

thats cheap if they do them for ur model,also wire brush threads and soak with wd 40 and have new nuts and have a hacksaw to hand if nuts seized.

or an decent set of molegrips usually holds the ball joint if a spanner doesent, thats when you go to loosen the nut. around an hours work to do both sides.

[C64]

Thanks guys I got then for ?12 each from a local supplier :)