PDA

View Full Version : VOLVO S40 IMMO



makura
23rd August, 2012, 06:27 PM
I have made a key for this Volvo S40 but the car wont crank,i used zedbull clone.
Has any one done this car with success?
What is the key logic in this dump?

achaccha
23rd August, 2012, 08:00 PM
Please friend, reading can publish your key you have programmed?
Your file has two keys programmed, the engine should start perfectly.
regards

makura
23rd August, 2012, 08:13 PM
Dont have the key logic at hand but if you can show me what you are getting i will compare tomorrow,is it normal for it not to crank?when a good transponder is read does it overide the alarm system or do i have to have a remote?

keygargoil
24th August, 2012, 12:25 AM
it should overide the alarm i have had one where i read the box generated 2 chips on tango and it wouldnt start i also tried with ori zed bull and that wouldnt work neither the car ended up going to the dealer i think that when the alarm is set and is going of and you produce a chip on some of the older volvos it sends the syncro out between the ecu and immo

makura
25th August, 2012, 10:01 PM
The car now starts but the alarm wont stop,had to disconect the siren but the hazards keep flashing.
I read somewhere that if you unlock the door twice the alarm is disabled,not this baby she is screaming her lungs out.
Any pointers guys?

ruwi
5th November, 2013, 07:36 PM
I have this exact issue in the workshop right now... I HATE VOLVO!

makura
5th November, 2013, 10:11 PM
I have this exact issue in the workshop right now... I HATE VOLVO!

Hi
Try unlocking the drivers door twice,that worked for me.