PDA

View Full Version : Daewoo / Chevrolet Kalos 1.4 16V hybrid immo off



kwansterp
23rd August, 2012, 10:42 PM
Hi all

I have a problem with the car, not fires. Red light next to the clock.
Is it possible to permanently remove immo?
Hybrid ECU has the numbers:
Daewoo / Chevrolet Kalos 1.4 16V
XAHD PF 96417551
MR140

Here are some pictures driver.

Thank you in advance for your help.

http://www.resmoto.com/testowy/zdjecia_inne/kalos1.jpg

http://www.resmoto.com/testowy/zdjecia_inne/kalos2.jpg

http://www.resmoto.com/testowy/zdjecia_inne/kalos3.jpg

Meat-Head
23rd August, 2012, 11:50 PM
Would like to say AHHH WICKED.

Dobut it very very much.

rkaton12
24th August, 2012, 06:32 PM
read memory nr1 st95020

bursuc
26th September, 2012, 12:35 PM
someoane has immo off solution for this ?

kwansterp
26th September, 2012, 03:03 PM
Hi

I used an emulator, which plugged into the driver installation. Soldering hybrid forgave myself to avoid damage.

sepistar
9th January, 2013, 01:08 PM
Hi all

I have a problem with the car, not fires. Red light next to the clock.
Is it possible to permanently remove immo?
Hybrid ECU has the numbers:
Daewoo / Chevrolet Kalos 1.4 16V
XAHD PF 96417551
MR140

Here are some pictures driver.

Thank you in advance for your help.

http://www.resmoto.com/testowy/zdjecia_inne/kalos1.jpg

http://www.resmoto.com/testowy/zdjecia_inne/kalos2.jpg

http://www.resmoto.com/testowy/zdjecia_inne/kalos3.jpg

woder how did you open this ecu?
have one here that when outside are cold,the car started only when i warm up the ecu.
have you guys an idea what could be?
regards

Meat-Head
9th January, 2013, 07:21 PM
woder how did you open this ecu?
have one here that when outside are cold,the car started only when i warm up the ecu.
have you guys an idea what could be?
regards


knackered.

did have an Opel Astra simular it was faulty capacitor.

zanovo
9th January, 2013, 11:06 PM
To kwansterp:
If you can fined the tool to read CPU Flash (no nead to open ECU), I can help you to correct it as IMMOoff.

Anmed
10th January, 2013, 10:10 AM
Correctly. There are tools to work with these ECU. Available noimmo flash. Not sure, but maybe available in this place delcohacking.net • Index page (http://www.delcohacking.net/forums/)
Other tools are sold in Russia and Ukraine.

kwansterp
10th January, 2013, 12:04 PM
No need to open the ECU to remove immo. Just hook the cable emulator with ECU or at the very immobox under the steering wheel. I personally opened the ECU because I do not know the solution yet. Next time without interfering with the hybrid.
https://carlabimmo.com/en/28-daewoo-2.html

javiercj
15th January, 2013, 03:41 AM
To kwansterp:
If you can fined the tool to read CPU Flash (no nead to open ECU), I can help you to correct it as IMMOoff.

hello zanovo

please can i help me.

i have the unit(uce) chevrolet kalos

Ii is possible cancel to immo?

ref of unit: 90388019dlby-fwdlbys012220017

javiercj
16th January, 2013, 10:04 AM
Hi

I used an emulator, which plugged into the driver installation. Soldering hybrid forgave myself to avoid damage.

how do you do the Soldering hybrid?

kwansterp
16th January, 2013, 10:38 AM
In the middle of the driver did not have to solder anything, do not even need to open the ECU.
Go to page: https://carlabimmo.com/en/28-daewoo-2.html
download file daewoo 2 en.pdf, the entire installation wiring instructions on page 7
Pinning Emulato the driver, or the immobox, as you prefer.


Company Carlabimmo is Polish, but they sell all over Europe

Regards

dyzio
23rd June, 2014, 09:51 AM
hey how u connect emulator to immo? instruction is to connect 10 8 and 5 pin in my immobox is only 7 pins

kwansterp
23rd June, 2014, 10:44 AM
I plugged into the ECU harness. Outside they emulator mounted next to the driver.
Similarly, as shown on page 7:
http://www.autotronika.pl/files/file_add/file_add-109.pdf

bugarcek
3rd August, 2020, 01:38 PM
Can someone make me immo off on that ecu

I have read 95020