View Full Version : VW LUPO MOTOMETER PINOUT SIMULATION
weske2000
25th August, 2012, 03:00 PM
hello I want to instrument panel
Connecting table have the power and the ground found
but want the speedometer and tachometer move
someone has the pinout of the blue connector on the rear panel
smokey08
25th August, 2012, 07:21 PM
Post the part number of the dash.
weske2000
25th August, 2012, 07:23 PM
Thanks for your response I'm only back on Monday in my shop I will say that the number
cfull
26th August, 2012, 11:33 PM
hello I want to instrument panel
Connecting table have the power and the ground found
but want the speedometer and tachometer move
someone has the pinout of the blue connector on the rear panel
Hi,
Blue connector
pin 1 and 23: +12v
pin 7 : Gnd
pin 28 : speedometer
Regards
weske2000
27th August, 2012, 03:53 PM
clock Image
smokey08
27th August, 2012, 04:13 PM
919 in the part number means non-canbus so cfulls pinout should be correct apart from he forgot to write another gnd on pin 24. Has this dash only got 1 connector on the back? gnd on pin 7 is not required.
K-value should be 4345/km
weske2000
27th August, 2012, 05:02 PM
Blue connector only
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.