PDA

View Full Version : Need picture of PCB - Marelli MJ 602 ECU (Opel Combo 1.3JTD)



VTS_Tibi
3rd September, 2012, 09:05 AM
Hi Guys,

I have an ECU off a 2011 Opel Combo 1.3 JTD here, and I would need a picture of the REAR of the PCB, where the pins are soldered down for the two ECU plugs.:


http://i1115.photobucket.com/albums/k545/TestorVTS/WP_000002.jpg


The car was involved in an accident and a short circuit burnt out a small part of the PCB and I would like to repair it.

The ECU is the usual Magneti Marelli MJD 602, found in every 1.3 JTD (there are different variants, but I guess the PCB layout is the same).

Regards,

Tibi