Launch Control Bmw

[rpower]

Anyone knows were to do launch control in this map

Is from E87 120D Regards

[rpower]

Look this somewere from here

[spawns3]

I never try on BMW , but it's a edc16c35 ?

Cheers

[rpower]

yes edc16c35

[spawns3]

I gonna check in damos .

[assitutto]

I have the same car, this topic interests me very much :)

[ecutuners]

need damos, find 1st gear torque limiter and need to modify the value of where 1st gear starts and ends and modify, i did it in vag edc16 and vag edc17 many times

[rpower]

I found the torque limit i wil test and post reply

[ecutuners]

You will need to find the start value of 1st gear and make it 00 00 or FF FF if you don't it won't limit revs when car is not moving ;)

[assitutto]

is it correct?

http://s10.postimage.org/hngqx2fut/LCmap.jpg (http://postimage.org/image/hngqx2fut/)

or it's like this?

http://s15.postimage.org/nzq7aewef/LCmap.jpg (http://postimage.org/image/nzq7aewef/)

[rpower]

My launch control is activated


Many thanks for ecutuners

;)

[assitutto]

can you help me? Can you share a screen of 2d map?

[rpower]

Send me your file

[assitutto]

you have PM, thank you!

[filecloud]

Hello
I think what you guys are talking about is no "launch control". It is just gear dependant limiters. Nothing more or less.
Please check wikipedia for the BMW/Porsche/Audi definition of launch control or see the attached pdf for a detailed description.
Here a list of cars with a real launch control and also videos
Cars With Launch Control: Houston, We Have Lift Off! | Automotive Addicts (http://www.automotiveaddicts.com/2486/cars-with-launch-control-houston-we-have-lift-off)
Sorry, i cannot find a BMW 120d listed ;-)
greetings,
filecloud

[spawns3]

is it correct?

http://s10.postimage.org/hngqx2fut/LCmap.jpg (http://postimage.org/image/hngqx2fut/)

or it's like this?

http://s15.postimage.org/nzq7aewef/LCmap.jpg (http://postimage.org/image/nzq7aewef/)


Matte maybe is more like in Pic 2 , because in the first one the "10" is tell in u how much columns u have to the 1?gear , if u check the map is 10x1 , if u chabge that value the winols can't recognize the axis value .

Try to change the first value and the last one . don't forget if u want to limit in high rpm u have to change the RPM axis to .

Cheers

[assitutto]

not only the first?
can you explain why the first valor and the last one?

thank you and sorry for my english

[spawns3]

Mate i don't have the car to test .

But if in 1gear torque limit u have 10x1 map RPM vs Torque .
ur max value on RPM range u have to edit to the rpm u want to make the LC and the value for that RPM must be 0 if not the car still up the revs .

[assitutto]

like this?
http://s17.postimage.org/w8ryuqqej/LCmap.jpg (http://postimage.org/image/w8ryuqqej/)

sorry but i'm difficult to translate from english to italian
my english is bad and i'm not a professional chip tuner like you or other people like ecutuners

[Morette]

Try working in hex/decimal view, not 2d.
You will see a line like 10/500/800/1100/etc (10 is width, then 10 RPM values) and then 10 values for the torque, 4000/4000/4000.. etc

It will make a lot more sense that way.

[spawns3]

like this?
http://s17.postimage.org/w8ryuqqej/LCmap.jpg (http://postimage.org/image/w8ryuqqej/)

sorry but i'm difficult to translate from english to italian
my english is bad and i'm not a professional chip tuner like you or other people like ecutuners


Show a Hex pic , but i think u get it ;)

[assitutto]

this is Hex picture:
mod http://s16.postimage.org/ciwcw5d75/mod.png (http://postimage.org/image/ciwcw5d75/) ori http://s16.postimage.org/4rfmxl91t/ori.png (http://postimage.org/image/4rfmxl91t/)

and if you want this is my ori and tuned file.all comments are welcome: Download file bmw120d.rar (http://rapidgator.net/file/40854190/bmw120d.rar.html)

[Morette]

Try again in 16bit values.

[rpower]

here you go!!

[assitutto]

thank's for help

[Morette]

So did it work?

Won't this also make the car limit in first gear at that RPM?

[pacomasi]

here you go!!

you can teach as you have done?

[crackerx]

hello everyoane

i want a good launchcontrol mod on my e46 320d 150hp ecu edc16c31
hw0281011122-sw1037361881 euro4

two tuners tried to do but was a disaster...modified only 1th gear torque...nonsense

in my opinion the launchcontrol must to

-1th gear clutch pressed engine limited at 2300rpm (popcorn sound if possible)
-revs must be limited until X car speed


i don`t know to do that i don`t have a damos file for this ecu
i think the gear adresses is
first gear EB200 10x1
secomnd gear EB22A
third gear EB254
fourth gear EB27E
fifth gear EB2A8
sixth gear EB2D2

but i don`t know where is and if exist the map km/H x torque



this is my file https://mega.co.nz/#!egFQzIrA!haD1KkbhgejypRTuCcinEl_ZwghN2KPY5bgnA39 sajY

[Smac_a]

hi!

hey assitutto, you changed axis and nm for 2500rmp? Does this also acts as a rev limiter
in first gear? when you are moving...
Could you share ori/mod files? I also have similar car(320d)...

Best regards,
Smac_a

[vwmike]

Can someone help with this on a BMW 320D EDC17 ECU?

414880

[Shaqkel]

Hi please can someone help with launch control

[Zsaat]

[QUOTE = rpower, 1702542] itt megy! [/ QUOTE]
THX

[ecuworks]

helo im have bmw 320i can you make launche control for my

[qni666]

need damos, find 1st gear torque limiter and need to modify the value of where 1st gear starts and ends and modify, i did it in vag edc16 and vag edc17 many times

Hello i cant write to u a PM please mail me for one qustion