scenic 05 1.5dci injector nightmare

[justy22]

tried to get injectors out stuck solid so i used a slide hammer and it pulled at an angle and has pulled injector apart in the middle at the thread joint

i managed to screw the top half back into the bottom half and my only hope now is using the proper tool for removal but the ebay seller has none in stock until end sep

i feel absoloutely sick

[Meat-Head]

proper tool for removal but the ebay seller has none in stock until end sep

i feel absoloutely sick


OK.

Now you know how us non train drivers feel working on cars.

So the injector was fo0oked before you started,

1) What is the name and part number of this item.

2) If you try to use engine compression, point car at somebody
you don't like

OFF TOPIC:-

Know of a thick person, put a new seal in a hydralic ram on a skip lorry.
Being thick, didn't put circlip in, ram shot across parking lot like a shell out
a army tank - destroyed another vechile

There is a LARGE buliding with an inject stuck in the roof, been there
30 years.

ON TOPIC:-

3) Try pouring cocca-cola down it. Leave over night
3A) Chip pan cleaner
3B) Carb-a-tooter cleaner - NOT brake, but carb-a-tooter.

4) Is there a thick person with a welder that can make a metal bracket
to use simple car jack to see if you can destroy the injector pipes
or crush the rocker cover.

[justy22]

I bet when you have a fck up at meat motors you run for the first customer you see and take your frustration out on them pinning them against the wall and gut punching them like you did to the old biddy that caught you incorrecting


OK.

Now you know how us non train drivers feel working on cars.

So the injector was fo0oked before you started,

1) What is the name and part number of this item.

2) If you try to use engine compression, point car at somebody
you don't like

OFF TOPIC:-

Know of a thick person, put a new seal in a hydralic ram on a skip lorry.
Being thick, didn't put circlip in, ram shot across parking lot like a shell out
a army tank - destroyed another vechile

There is a LARGE buliding with an inject stuck in the roof, been there
30 years.

ON TOPIC:-

3) Try pouring cocca-cola down it. Leave over night
3A) Chip pan cleaner
3B) Carb-a-tooter cleaner - NOT brake, but carb-a-tooter.

4) Is there a thick person with a welder that can make a metal bracket
to use simple car jack to see if you can destroy the injector pipes
or crush the rocker cover.

[Meat-Head]

I bet when you have a fck up at meat motors you run for the first customer you see and take your frustration out on them pinning them against the wall and gut punching them like you did to the old biddy that caught you incorrecting

OFF TOPIC:-

Nope, but today when i got home, yet another "Vermin Media Cell Phone"
junk mail.

Rung the free phone number, and several staff members got such a round a LARGE gobfull of abuse, about being charged ?1.75 a month for paper billing then paying for junk mail.

He bloke, sounded like he was from a take a way - said they would cancell the ?1.75 charge, if i ever get billed again, just call them.

No idea if will still get paper bills or not.

Then there a seller on Ebay, they *WILL* be giving in to M-H-M. No two ways about it.

[justy22]

Finally got it fixed bought a proper tool for pulling 1.5 dci injectors, it pulled them out no problem just goes to show sliding hammers can cause more damage than anything else

so fitted 2 new injectors and its running perfect starts instantly hot and cold and no more bleep check injection

[Meat-Head]

cool what is the proper tool

[justy22]

cool what is the proper tool

Renault 1.5 DCI injector remover/puller. CLIO / MEGANE / KANGOO. - Hutson Precision Components Store (http://www.hutsonprecision.co.uk/renault-1-5-dci-injector-remover-puller-clio-megane-kangoo/)

[Meat-Head]

http://www.digital-kaos.co.uk/forums/members/201088-grizz/albums/pic/5909-justy22-sigsize3.jpg__________________
Tacho Universal 2008,Original UPA, Aoyue 968, Carprog Clone, Nissan & Renault keycard programmer, Digiprog 3 Clone
Renault 1.5 DCI injector remover/puller. CLIO / MEGANE / KANGOO.

Cor blimey Justy mate, your Siggy gets bigger by the day.

Can you update you passat 05 IN-correction thread, intreasted in the ECU

Thanks

Meat.

[smirnoff_rules]

can u take some pictures my welder like making things like this for me


Sent from my iPhone using Tapatalk