PDA

View Full Version : Bmw 320d 2012 F30



markony79
6th September, 2012, 04:37 PM
Hi
I need info for this car
HOW TO DO IT?

I know its have FEM module , which is on the passagare side on the side, and I know dash is 160D0wq

but is it FEM have same processor like Cas4 and need can blocker,
or have something new inside

RealOEM.com BMW F30 320d Control unit, front electronic module (http://www.realoem.com/bmw/showparts.do?model=3D31&mospid=54108&btnr=61_2801&hg=61&fg=25)

markony79
7th September, 2012, 08:57 AM
is it nobody do this car here?

markony79
10th October, 2012, 01:39 PM
I get this same car
how to do this FEM modul?
I found eeprom 95128 and 95256

ALEXEI
10th October, 2012, 02:02 PM
theres nowbody can do this car yet as you can see
only change fem module with new one ready programmed for car

markony79
10th October, 2012, 02:22 PM
theres nowbody can do this car yet as you can see
only change fem module with new one ready programmed for car

I wait you on Skype
Regards

motorsport
10th October, 2012, 04:57 PM
there is can blocker ready

TULGEYWOODMAN
10th October, 2012, 11:30 PM
looks a really neat undetectable job!

smartymarti
11th October, 2012, 07:45 AM
We've all been there and done it , question is I'm thinking BMW will just need to read key to catch you out

markony79
11th October, 2012, 10:23 AM
Thanks guys
but I fix with Elprosys Can Blocker for Cas4, make jumpers for Cas4
make little modification for 12v and work like charm

markony79
11th October, 2012, 12:17 PM
Dash picture

autoprog66
11th October, 2012, 01:11 PM
hello

where is the bridge that you've do in CAS modul i don't see on the foto.
What is the reference of this transistor that you've put where can we buy it??
you use the pdf connecions??
than ks for your answer
best regards

markony79
11th October, 2012, 02:14 PM
Voltage regulator ---I used this from INPUT 5v-30V
OUTPUT 5V

L7805CV STMicroelectronics | Mouser (http://se.mouser.com/ProductDetail/STMicroelectronics/L7805CV/?qs=sGAEpiMZZMvHdo5hUx%252bJYqVjaHwWx%252bwp)

conections make your self on Can Filter
you must know where is

CAN H--car
CAN L--car
CAN H--dash,ezs,cas
CAN L--dash,ezs,cas
PLUS--?v
MINUS

or modifidet like mine for REPSOFT PDF

rukartinatv
11th October, 2012, 03:20 PM
Dash picture

so what in the dash 160DW?

TULGEYWOODMAN
11th October, 2012, 03:32 PM
so what in the dash 160DW?

yes, but replace it with a 35080 [or variation]

eg
remove eeprom
read data
use replacement 35080

markony79
11th October, 2012, 06:04 PM
We've all been there and done it , question is I'm thinking BMW will just need to read key to catch you out

I check this car today with Ista( my friend have it)
we see KM in FEM , its same like in dash
but can not check only the key?

did the FEM module take value from dash and send in key?

PremierD
11th October, 2012, 06:11 PM
I would imagine it should .. but don't know if it will overwrite the higher value thats was in the key ... it's a suck it and see mate ..

markony79
11th October, 2012, 07:41 PM
I would imagine it should .. but don't know if it will overwrite the higher value thats was in the key ... it's a suck it and see mate ..

OK, we will see
this is my old coustomer, he have time to service in monday in Bmw
in tuesday I will post result

:beer:

autoprog66
12th October, 2012, 12:12 AM
Hello friend

I don't see where is :
CAN H--car
CAN L--car
CAN H--dash,ezs,cas
CAN L--dash,ezs,cas
PLUS--?v
MINUS

on the FEM modul, can you do a foto please where they are in the FEM modul.
PLUS and MINUS , i have see in the pdf but other no

thanks a lot
best regards

TULGEYWOODMAN
12th October, 2012, 08:12 AM
Find the can wires in and out and check with multimeter [after unplugging]

bit of self help detective work, if you are not confident about that, the dont do the job.

markony79
12th October, 2012, 08:50 AM
use his pdf

markony79
12th October, 2012, 08:51 AM
there is can blocker ready

his post, its the same conections

autoprog66
12th October, 2012, 10:33 PM
wich pdf i don't see it??

br

dashradio
12th October, 2012, 11:43 PM
wich pdf i don't see it??

br

If you were to read the topic from the beginning you would see the pdf file in post No ?, happy hunting.

markony79
26th October, 2012, 08:15 PM
I get coustomer today with Whiskey.....Cheers
this car get new generator for Free...... Cheers

:beer: :dancing2: :congrats: :canabis:

Meat-Head
26th October, 2012, 09:46 PM
this car get new generator for Free......


So how many miles did this have on it and what does the keys read on the dealers desk?

markony79
26th October, 2012, 09:53 PM
The car was have 59xxxkm....its leasing car in PRIVAT rent-a-car company...many firma do like this in sweden
I make this car on 18xxxkm....and they change the generator and do the 1. service on car.....hahaha....cheers

Meat-Head
26th October, 2012, 10:00 PM
The car was have 59xxxkm
I make this car on 18xxxkm....


Just seems STRANGE, Adlof makes it so you HAVE to install a can blocker, but the keys can roll back, you would have thought modify the key, stick a M35080 in, cover in epoxy! :giveup:

rukartinatv
26th October, 2012, 10:10 PM
Just seems STRANGE, Adlof makes it so you HAVE to install a can blocker, but the keys can roll back, you would have thought modify the key, stick a M35080 in, cover in epoxy! :giveup:

if you put the blocker the key take new km from cas

markony79
26th October, 2012, 10:11 PM
No the Keys is modificated from Fem module
in Fem module, like i was post..can not see original km+all service is RESET,
only come sam from dash...that means , the Fem module take Km from dash and sent in Key....
i dont check what hapends after 500km ( like MB Cars) after take out the Can Blocker????

rukartinatv
27th October, 2012, 12:24 AM
No the Keys is modificated from Fem module
in Fem module, like i was post..can not see original km+all service is RESET,
only come sam from dash...that means , the Fem module take Km from dash and sent in Key....
i dont check what hapends after 500km ( like MB Cars) after take out the Can Blocker????

i see your post at dp3 forum.
my user ftonik.
Did you use elprosys blocker right?

markony79
27th October, 2012, 08:35 AM
i see your post at dp3 forum.
my user ftonik.
Did you use elprosys blocker right?

Yes, I use Elprosys Can Blocker....but must little modificated for 12v ...chreck the picture here...in my post before

ker0sin
28th October, 2012, 01:01 PM
I check this car today with Ista( my friend have it)
we see KM in FEM , its same like in dash
but can not check only the key?

did the FEM module take value from dash and send in key?

I did not ......
"nails HANDS"
I do it, here this BMW-Explorer BMW-Explorer (http://www.bmw-explorer.ru/?page_id=49) (select -EN)
:captain:

z786
28th October, 2012, 01:14 PM
isit me or did i jus see F series mileage reset via obd?

ker0sin
28th October, 2012, 01:24 PM
isit me or did i jus see F series mileage reset via obd?
Yes, ...but not all modul...- best is,write To ingeneer from this site,,,,,, (100% NOT IKE)

rukartinatv
28th October, 2012, 01:33 PM
Yes, ...but not all modul...- best is,write To ingeneer from this site,,,,,, (100% NOT IKE)
i use bmwexplorer. you can reset km on F series but not cas4 or fem module.

ker0sin
28th October, 2012, 01:41 PM
i use bmwexplorer. you can reset km on F series but not cas4 or fem module.
SO sent eeprom of your "fem" to.....
-not long time waiting,,,,
*cas? yes,,,,will wait,,,,

rukartinatv
28th October, 2012, 02:19 PM
isit me or did i jus see F series mileage reset via obd?

yes but not cas4 or fem