View Full Version : IMMO OFF WV CADDY 1.9 SDI 2000
ChipDoctor
7th September, 2012, 02:08 PM
Hi guys
I have one ECU from WV Caddy 1.9SDI 2000
038906013 DIESEL EDC15V
BOSCH:281010007
How to remove the immo in this ecu??????
Thanks
achaccha
7th September, 2012, 02:28 PM
Hello Friend.
You can tell if there are any known memory in your ecu?
In any case you can confirm whether you convensional injection pump, only need to override the component above the fuel cut solenoid.
this fuel cut solenoid should give you a feed of swicht IG.
luck
yugo45
7th September, 2012, 02:30 PM
First picture , lower left corner there is 24C02 . Read eeprom and post here.
ChipDoctor
7th September, 2012, 02:42 PM
Hello Friend.
You can tell if there are any known memory in your ecu?
In any case you can confirm whether you convensional injection pump, only need to override the component above the fuel cut solenoid.
this fuel cut solenoid should give you a feed of swicht IG.
luck
Hi my friend
Can you explain a little better because I do not know English well
Thanks!!!
ChipDoctor
7th September, 2012, 02:49 PM
First picture , lower left corner there is 24C02 . Read eeprom and post here.
Hi my friend
The IMMO in this ECU is only in this eeprom 24C02 ????
The immo Decoding says and for one flash 29F400
Can you explain me???
ChipDoctor
7th September, 2012, 03:50 PM
First picture , lower left corner there is 24C02 . Read eeprom and post here.
Hello my friend
This is my original dump with immo
I want dump without immo for my ECU and i want to know if the IMMO in this ECU is only on this eeprom
The immo Decodin says for one flash
If find a dump without IMMO for 24C02 I am OK not need anything else????
Thanks!!!
blerim shehi
7th September, 2012, 04:07 PM
24C02_EDC15V.off.rar
ChipDoctor
7th September, 2012, 04:13 PM
24C02_EDC15V.off.rar
Hi frend
Are you sure that the file is clean
ChipDoctor
7th September, 2012, 04:29 PM
Hi guys
For this dump i want clear dump without immo
Please give me one dump clean
Thanks
ChipDoctor
7th September, 2012, 07:39 PM
Hi guys
On this ECU i need only a clean dump for 24C02 and the immo remove???
ie Reprogram the eeprom 24C02 with a clean dump and I'm ready????
No need anything else??
Thanks
daewo97
7th September, 2012, 07:45 PM
not need to do anything else...write that dump and ....ready
Autotecno2006
7th September, 2012, 08:01 PM
here is ur File 24c02 with IMMO Off. lol
ChipDoctor
7th September, 2012, 08:06 PM
not need to do anything else...write that dump and ....ready
Hello my Friend
Do you know which program will clean my dump because the immotools,immokiller does not include this ECU
Autotecno2006
7th September, 2012, 08:09 PM
Just use ur programmer to Write in the file that i have just sent U & Van will START OK , Regards P.
helmi reguig
7th September, 2012, 08:15 PM
try this
________________
:captain:
ChipDoctor
7th September, 2012, 08:37 PM
try this
________________
:captain:
My friend this dump you sent me is the same with my original with immo
Compare with HexCmp and you will see
There is no difference, is Full the same
ChipDoctor
8th September, 2012, 08:17 AM
Goodmorning guys
Thanks for your help!!!!!
To know all how ***964;***959; removed the IMMO on this ECU
Read the eeprom 24C02 and clean the file with otocheck
Repair the immo and now is ok!
Now the Caddy works very nice
Best Regards
cange
15th May, 2013, 11:45 AM
here is ur File 24c02 with IMMO Off. lol
worked for my
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.