patch for TM 6900 super ASTRA 1D3A for ligtv, Help

[onceaponatimeinamerica]

can anyone please help me find a patch for this.
thanks

[benny/9]

can anyone please help me find a patch for this.
thanks
*************************************************
the latests 6000 series patch is dated 19/1/09
and is on the forum, in the posts in red in this section
you dont say where you are or what size dish your useing but
astra 3a @23.5e needs a large dish from the uk
i have a 1.2mtr dish and i loose signals from some of the transponders at certain times of the day and the futher north and west you are the more
difficult it is to get a good signal without a very large dish, here are the satellite footprints from astra 3a for vertical and horizontal transponders

[.: JaCkPoT :.]

No wonder i dont receive it, thought it was me who couldnt find it..
Thanks benny for footprint

[onceaponatimeinamerica]

cheers for your reply, so this means i have to buy a bigger dish. i live in the uk in london, and have only got a 90cm dish (motorised)

[.: JaCkPoT :.]

with that size in london you could on a sunny day pick it up

[onceaponatimeinamerica]

what is polsat? and can i get it from london

[.: JaCkPoT :.]

Its a polish package found on the 13e hotbird satellite, this package is now no longer available..

[onceaponatimeinamerica]

i updated my box with the 19/1/09 patch, but my lig tv is still comming up as scrambled. i am updating it using a usb pen. another this is, is ASTRA 1D3A the same as astra 3. can some please enlighten me to what the problem might be.

Thanks in advance

[.: JaCkPoT :.]

Do you even have more than 37percent quality signal on the channel? Otherwise it will break up

[onceaponatimeinamerica]

the strenght is good, more for lig tv was working when the man installed it.

[onceaponatimeinamerica]

anything mate?

[onceaponatimeinamerica]

do i need to update the softcam as well?

[onceaponatimeinamerica]

is there anyone who can help me out:marchmellow:

[.: JaCkPoT :.]

use the latest patch and softcam...that should open it unless thay changed encryption or if its down

[onceaponatimeinamerica]

what are the procudures after i have done the update. have got to press any buttons

[onceaponatimeinamerica]

i have loaded both patch and softcam, but still comming up as scrambled channel

[onceaponatimeinamerica]

anyone can advice me please