View Full Version : crafter 2.5tdi
remapecu
9th September, 2012, 12:01 PM
hi.
Any one had any experience with removing speed limiter(crafter 2.5tdi 2007 factory 90km/h) with ECUSAFE working or not working ????Thanks
ruslan.v
9th September, 2012, 12:12 PM
hi.
Any one had any experience with removing speed limiter(crafter 2.5tdi 2007 factory 90km/h) with ECUSAFE working or not working ????Thanks
Give eeprom dump. I don't know how ecusafe work with this ECU, make copy and try :)
remapecu
9th September, 2012, 04:52 PM
Give eeprom dump. I don't know how ecusafe work with this ECU, make copy and try :)
In that case iam sure then speed limit is on the flash unfortunatly but where ?
smayer
9th September, 2012, 04:59 PM
Speed limit is in EPROM, read and post.
remapecu
9th September, 2012, 05:57 PM
Speed limit is in EPROM, read and post.
well my friend i have tryed before to change value in eeprom vmax is 190 but van still going max 90km/h that mean then this limiter must be in the flash
smayer
9th September, 2012, 06:16 PM
Just to check if you don't have another problem, change vmax in EPROM to 70 and see whats happening.
remapecu
9th September, 2012, 06:31 PM
Just to check if you don't have another problem, change vmax in EPROM to 70 and see whats happening.
tryed in both way nothing changed still 90km/h . . .
camil
9th September, 2012, 06:37 PM
Are you sure your changes get written to the eeprom correctly? Not writeprotected?
ruslan.v
10th September, 2012, 05:09 PM
I think in 99% speed limit is in eeprom. Give full read by BDM.
remapecu
10th September, 2012, 07:22 PM
I think in 99% speed limit is in eepom. Give full read by BDM.
you are wrong my frind ...
ruslan.v
10th September, 2012, 07:46 PM
you are wrong my frind ...
I agree :) I will try to find this information in flash....
spawns3
10th September, 2012, 08:43 PM
Mate try with vag-com .
ALEXEI
10th September, 2012, 08:46 PM
speed limit in flash. work with ecusafe
ruslan.v
10th September, 2012, 08:59 PM
Try this and report.
remapecu
11th September, 2012, 08:53 AM
Try this and report.
I have tryed already ecusafe ruslan and no results . . .
spawns3
11th September, 2012, 09:52 AM
Mate , all vag cars u can remove the speed limiter with VAS or VCDS .
ruslan.v
11th September, 2012, 12:55 PM
I have tryed already ecusafe ruslan and no results . . .
This information in flash is responisble for speed limit : active or not. I see ecusafe change the same place. I will check it in another way.
easytech
12th September, 2012, 07:53 AM
Check vagcom Channel13
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.