crafter 2.5tdi

[remapecu]

hi.
Any one had any experience with removing speed limiter(crafter 2.5tdi 2007 factory 90km/h) with ECUSAFE working or not working ????Thanks

[ruslan.v]

hi.
Any one had any experience with removing speed limiter(crafter 2.5tdi 2007 factory 90km/h) with ECUSAFE working or not working ????Thanks

Give eeprom dump. I don't know how ecusafe work with this ECU, make copy and try :)

[remapecu]

Give eeprom dump. I don't know how ecusafe work with this ECU, make copy and try :)

In that case iam sure then speed limit is on the flash unfortunatly but where ?

[smayer]

Speed limit is in EPROM, read and post.

[remapecu]

Speed limit is in EPROM, read and post.

well my friend i have tryed before to change value in eeprom vmax is 190 but van still going max 90km/h that mean then this limiter must be in the flash

[smayer]

Just to check if you don't have another problem, change vmax in EPROM to 70 and see whats happening.

[remapecu]

Just to check if you don't have another problem, change vmax in EPROM to 70 and see whats happening.

tryed in both way nothing changed still 90km/h . . .

[camil]

Are you sure your changes get written to the eeprom correctly? Not writeprotected?

[ruslan.v]

I think in 99% speed limit is in eeprom. Give full read by BDM.

[remapecu]

I think in 99% speed limit is in eepom. Give full read by BDM.

you are wrong my frind ...

[ruslan.v]

you are wrong my frind ...

I agree :) I will try to find this information in flash....

[spawns3]

Mate try with vag-com .

[ALEXEI]

speed limit in flash. work with ecusafe

[ruslan.v]

Try this and report.

[remapecu]

Try this and report.
I have tryed already ecusafe ruslan and no results . . .

[spawns3]

Mate , all vag cars u can remove the speed limiter with VAS or VCDS .

[ruslan.v]

I have tryed already ecusafe ruslan and no results . . .

This information in flash is responisble for speed limit : active or not. I see ecusafe change the same place. I will check it in another way.

[easytech]

Check vagcom Channel13