PDA

View Full Version : Toyota Camry smart key System Lock



toniz
11th September, 2012, 04:16 PM
Hi guys,

Have a Camry Japan 2006, all keys lost.
Trying to program two new smart keys, but it looks like the system is locked.
Ignition will not turn on.

Is there a procedure to reset with ignition off, or to make ignition on?

Thanks

achaccha
11th September, 2012, 06:52 PM
You must have a virgin file for the smart key.
I think you can do this with TCODE.
regards

toniz
11th September, 2012, 09:15 PM
Thank you,
You are correct , virginizing the smart box resolved the issue with ignition.
But still refusing to program keys.
Orange dongle recognizes the system but then remains silent forever.
T300/MPV fails to program key.
Techstream too.

Do i have to virgin ID box too??

Thanks

bearheroes
11th September, 2012, 10:12 PM
many Toyota cars with smart keys,need to do this procedure of writing keys,without closing the driver's door.Try it...

achaccha
11th September, 2012, 10:48 PM
Thank you,
You are correct , virginizing the smart box resolved the issue with ignition.
But still refusing to program keys.
Orange dongle recognizes the system but then remains silent forever.
T300/MPV fails to program key.
Techstream too.

Do i have to virgin ID box too??

Thanks

You have Techstream? maybe we can program via remote. you need to contact and help via remote
can tell us how has the smartkey virgin?
regards

toniz
12th September, 2012, 06:50 AM
Yes Driver's door was open all along.
Will virgin ID box today and try again.

Thanks

mauricio puebla
13th September, 2012, 02:35 AM
You should have no problem to program the keys after you virgin the ID box. After you do this you can use Techstream and the problem will be solved.

toniz
13th September, 2012, 08:02 AM
I found id box already virgin, maybe orange dongle managed to reset.
Keys are refusing to program - after techstream ask to place key by ignition the car makes sound, recognizes the key then after the 30 seconds says Failed. T300 does the same.
Is there anything special to do?

koncimobil
13th September, 2012, 08:27 AM
post here original dump from smart ecu & id box.

nasir
13th September, 2012, 10:33 AM
friend r u using the right key to programme if ur r using the wrong id key then it wont accept the key check it.

toniz
13th September, 2012, 12:48 PM
Dumps attached,

Keys were supplied by customer , do not know where they got them from.
What id shoud they read on Tango?

koncimobil
13th September, 2012, 01:20 PM
Please info code smart ecu & i decu.

toniz
13th September, 2012, 01:27 PM
Sorry
Id code 89784-33010
Smart box 89990-33030

ali re
13th September, 2012, 01:48 PM
hi
try with new smart key-connection 4-13 port for 35 minutes
pass=pm

toniz
13th September, 2012, 02:06 PM
Do i try to program keys first, or firs syncro for 35min?

ali re
13th September, 2012, 02:43 PM
firs syncro for 35min and program

toniz
13th September, 2012, 10:03 PM
Still problems,
after syncro with the new files, system refused to enter programming mode at all. Techstream enters smart key, but keep on saying - lost communication when you try to do Key regist, T300 also recognizes the system but can not enter programming mode.
If i use self modified file for smart box, i can enter programming but it fails after the 30sec.

I am confused now, is it files or is it the keys that are the problem??

koncimobil
14th September, 2012, 12:13 AM
Here dumps should be working perfect (pass pm).

toniz
24th October, 2012, 07:23 PM
Still stuck with this car.
I wish someone can put me in the right directions.
Is dumps the problems or keys?
Compared the keys with another working car and tranponder matches all pages, but freq is 315mhz instead of 312mhz.
Could the freq be a problem or tranponder should program regardles of remote.

Please help

toniz
26th November, 2012, 08:24 PM
Just an update,

Problem was the key freq. Got correct keys, and all went perfect..

Thanks to all for input.

koncimobil
27th November, 2012, 01:15 AM
Just an update,

Problem was the key freq. Got correct keys, and all went perfect..

Thanks to all for input.

How do problem solved?
Use new smartbox & id ecu ?
or virgine files?

toniz
27th November, 2012, 07:22 PM
Hi koncimobil,

I used your files and all went perfect.

Thanks again for your help.

Twinkleife
24th February, 2013, 06:15 AM
Hi all,I have a ID CODE and Smart key ecu lock out on a 2005 Toyota Avalon with all smart keys lost.I reset d immo at first with T300 but got locked out after dash light went off.i can send dumps of ID CODE BOX and SMART KEY ECU.Pls help with virgin dump.
1.first file is for ecu,id code box
2.second file is for smart key ecu (ECU AGGREGATION MODULE).
Pls help with virgin dump.
Thanks in Advance.

mostafa badawi
8th June, 2013, 10:22 PM
Here dumps should be working perfect (pass pm).
hi
INEED PASSWORD