PDA

View Full Version : toyota Supra 95 model



lashkar97
11th September, 2012, 05:10 PM
hi friends i need change millage Toyota Supra 95 model some one can help me that where is millage store and which eprom number . because inside cluster i am not find any eprom .please help:manuscarf:
advanced thanks to all DK.s

velindro
11th September, 2012, 05:42 PM
show some photos

dashradio
11th September, 2012, 06:04 PM
You won't find a eeprom, you have to zero the module and then pulse on the bench for about 5 days

captain crackers
11th September, 2012, 06:15 PM
There is no eeprom. The mileage is in a micro which is contained in the mileage display unit which must be removed from the car. The micro is zeroed and then pulsed with a square wave generator to the required value. If you have a generator and your customer is prepared to wait a long time possibly a week or two depending on the new value to be pulsed (the last one I did took about ten days to pulse 118.000kms) and you want to go ahead with it. Send me a PM and I will give you the details. The car can be driven without the display while you do the work. Arthur.

lashkar97
18th September, 2012, 10:48 AM
thanks all friends for help problem is solve .

neon121
2nd September, 2013, 09:50 PM
Hello
How make zero on the display unit ??
Only the reload counter 99999 and again 0

afitijuana
3rd September, 2013, 09:57 PM
thanks all friends for help problem is solve .

How did you make it ?

Meat-Head
4th September, 2013, 08:46 PM
Would like to bump this thread for education purposes.

how do you change from KM to miles then how to reset to zero?

Rumor states max s***d 200 MPH

Thanks

neon121
4th September, 2013, 09:16 PM
In 24h I made 20.000 miles :D, but is to slow

Meat-Head
5th September, 2013, 02:35 PM
In 24h I made 20.000 miles :D, but is to slow

I had a car like that once.
could you share the information on how to reset, power up and which wire to pulse. please

thanksss

neon121
9th September, 2013, 12:59 PM
1 ______________7
x x x______ x x x x
x x x x x x x x x x x
Dash connector

Power up
pin-1 GND
pin- 2 and 3 Pulse
pin- 7 +12V

Meat-Head
9th September, 2013, 02:28 PM
1 ______________7
x x x______ x x x x
x x x x x x x x x x x
Dash connector

Power up
pin-1 GND
pin- 2 and 3 Pulse
pin- 7 +12V

thankssss but how do you reset the micro?

neon121
9th September, 2013, 08:03 PM
I don't find that information. Roll forward to 999999 :joyous:
In week 140.000 miles

diagtech
10th September, 2013, 09:25 PM
Got it somewhere will dig it out from memory km change is done by cutting pins and reset to 0 miles is shorting two pins out will try to find info sure it came off someone with cdh kit but a long time ago

neon121
13th October, 2013, 02:32 PM
How reset this dash??

nckryder
15th October, 2013, 10:23 PM
I used to do loads of these. You spike the micro pins until it goes to zero. Its not really worth the time and effort though to do one of these as what can you charge to cover your time as these can take ages to do and you may poss damage it. My advice is don't bother stick to easier cars