Clone siemens PPD 1.2

[xtreem]

hello
I need to clone this ecu. siemens PPD 1.2.
they are equal.
and need only change the immo?
thanks

[arvedo]

friend can do it with perfect functioning BDM100 greetings

[xtreem]

any have a pin out complet off bdm connections?

[spawns3]

Here mate

Bild:Siemens PPD 15.jpg - OBD-Wiki (http://wiki.obdtuning.com/?title=Bild:Siemens_PPD_15.jpg)

[xtreem]

thanks

the original ecu this faulty. if I do not get back up, as I can for the car to work?

[spawns3]

Mate i never have problem with this ecu type , but i think have eeprom too , so change it for the new ecu and the car start! The ecu have the same SW and HW ? If yes u only need to change eeprom.

[xtreem]

yes is the same.
the immo is not within the mpc?
thanks

[spawns3]

Try to read it . If u have EEprom on bdm read it ;)

Maybe u will find one 95320

[xtreem]

the old ecu can not read with BDM. this faulty. !!

the ecu has a memory eeprom near the mpc.25320an

if I switch to the new ECU will work? the new ECU is equal. sw and hw is the same.
this 25320an is immo?
view attached image.

thanks

[spawns3]

Yes mate change it .

[xtreem]

after changing the car will work ok?

[spawns3]

after changing the car will work ok?


Try it mate ;) and then report back .

[xtreem]

I'll test

this eeprom is immo?

[xtreem]

hello
problem solved.
Thanks

[spawns3]

hello
problem solved.
Thanks

When u want to thank's , use the thanks botton ;)

Cheers

[xtreem]

When u want to thank's , use the thanks botton ;)

Cheers


thanks my friend