PDA

View Full Version : Opel Corsa D 1.3 cdti



jolor
14th September, 2012, 11:44 AM
Good morning everyone. I have a Corsa D 1.3 CDTI 2010 in my workshop with reference MJD 603.S3/HW03A/3333-S362 S4400 Z13DTJ MT 55568383 KZ. with a reading problem with the BDM. When I try to complete reading the MPC555 does not recognize the drive automatically. Opens a window with the available models and prompts to select. Or is he lost his boot. Someone get me a full ecu file BDM for this unit so I can reset all data?
Thank you.

jolor
14th September, 2012, 07:47 PM
No one can help?

spawns3
14th September, 2012, 07:54 PM
When open the window to choose a proper driver , slect it ;) or ECU is dead .

Cheers

jaca1232
14th September, 2012, 08:16 PM
try this. maybe will help

jolor
16th September, 2012, 12:29 AM
try this. maybe will help

Thanks for the help. I could program the unit but the car will not start and the OP-COM can not make the diagnosis engine unit. I think we have to schedule with the exact version of the car. If possible get someone a full version BDM for reference I put in the first post thank.

jolor
17th September, 2012, 02:17 PM
I have reprogram this ecu with bdm file from GM 55568626 LE MJD 6O3.S7 HW:03A-3337-S862 and the car start now, but does not pass the 3500 rpm because 55568626 LE has particle filter and my car does not have. So always gives me error in particle filter and the sensor. If someone could get me the original file for bdm ecu MJD 603.S3/HW003A/3333-S362 S4400 Z13DTJ MT 55568383 KZ I appreciate it. Thanks.

camataru70
11th April, 2019, 05:00 PM
I need help for repair my car,and for that i need full ktag read of:55568626 LE MJD 6O3.S7 HW:03A-3337-S862 ! Can you give me that?Thanks