View Full Version : Croma 1.9 jtd ECU problem 0281012962
engert
14th September, 2012, 12:14 PM
hello all
this is a very big problem of mine. this car have a ecu burned problem that i replace it with a manual ecu (the car have a automatic trasmition 150 hp 0281012962 ecu nr). the one that i find is a 0281012963 manual 150 hp. after i change eprom the car starts but the automatic lever cant move from Parking. if i remove it manualy the car moves but the check automatic trasmission comes out in the dash board and the mil of it blinks that meens that the car is in safety mode. is there any chance for me to adopt the automatic trasmission in this ecu. any help will be appreciated. i am in big trouble with this one. thank you guys
spawns3
14th September, 2012, 03:43 PM
Try to code the ecu for automatic trasmission ;)
engert
14th September, 2012, 03:44 PM
How can i code the ecu that is coded
spawns3
14th September, 2012, 03:49 PM
Mate try with TECH 2 .
engert
14th September, 2012, 03:56 PM
I have try with the examiner of fiat and its the same so i dont think that tech 2 can solve this kind of problem
spawns3
14th September, 2012, 07:58 PM
Mate almost ecu have a option to code with manual gearbox or automatic . Do you try to code it ? cheers
engert
14th September, 2012, 07:59 PM
I cant code it cos its coded
spawns3
14th September, 2012, 08:07 PM
tomorrow i ask a friend that work on fiat dealer how to do it ;) or send me ur flash maybe i can code it from flash ;) but read it with bdm .
Cheers
engert
14th September, 2012, 08:10 PM
Ok thank u very much
spawns3
14th September, 2012, 09:30 PM
Mate if u read the flash with BDM . I can change it to you . here a pic for switch .
engert
14th September, 2012, 09:30 PM
Ok thank u very much
engert
15th September, 2012, 05:38 PM
here is the flash read with bdm
engert
15th September, 2012, 05:41 PM
i wrote i file with bdm of a automatic ecu and the car wont start because its not the same sw as mine but the automatic trasmition is ok. how can i solve this
spawns3
16th September, 2012, 12:47 AM
Mate , monday i send u the file coded for automatic trasmission.
Cheers
engert
16th September, 2012, 01:16 AM
I hope so because i am in big trouble. Thank you a lot
puntoboy
16th September, 2012, 02:41 AM
I found and changed the switch for you the file is now auto it just needs the checksum correcting...
engert
16th September, 2012, 10:07 AM
I will try it and let you know. Thank you
spawns3
16th September, 2012, 10:20 AM
Here u have mate , chk correct .
engert
16th September, 2012, 10:21 AM
Thank you mate
spawns3
16th September, 2012, 10:23 AM
Thank you mate
For that u have the thanks botton , not need to do a new reply ;)
spawns3
19th September, 2012, 10:19 AM
Mate do you solve your problem ?
Cheers
engert
19th September, 2012, 11:32 AM
Maybe today i am going to try the solution you posted me because the car is 50 km away from me. I will let you know as soon as a solve that. Thanks
engert
21st September, 2012, 06:11 PM
I just test it and is the same thing. The lever dont dissengage the parking so its the same. Do you have any ideas?
engert
21st September, 2012, 11:56 PM
I solve writing a sw of the same ecu that i find. I remove the egr and fap with ecusafe and now the car seems to run ok. Thank u mate anyway for your time
spawns3
22nd September, 2012, 12:53 AM
I solve writing a sw of the same ecu that i find. I remove the egr and fap with ecusafe and now the car seems to run ok. Thank u mate anyway for your time
DPF don't work with ecusafe mate ;)
engert
22nd September, 2012, 02:44 AM
How can i remove it so? Can u remove it if i post to you the flash that i wrote?
martinbr
23rd September, 2012, 02:32 PM
hi in this model ES i thing works
i made in few times and they goes without coming back
maybe i'm wrong so corect me
engert
23rd September, 2012, 04:13 PM
I also try this one without problems and any lights on dashboards so maybe it works fine. I am not sure but i hope it goes ok
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.