PDA

View Full Version : Honda Civic-1997 IMMO ...HELP....



tiguan
16th September, 2012, 11:15 AM
hi all

I have searched and found the DK forum for Immo-Off Honda Civic
if you remove the Immo OKI-board in the ECU the car will start.

I have no luck :dontknow:, Car will not start has anyone another solution for this Immo-off HONDA

Honda: Civic Coup? 1.6i
LS 16_V D16Y7 77kW (1997)

ECU: 37820-P2E-G01
906-107747

Immo-Box: F+g Megamos
HM: 339730-SX0-G01
HL: SX0-8A000-000
6 D 23 0886

Thx
tiguan

koncimobil
16th September, 2012, 12:14 PM
write oki eeprom with ff.
assembly immo module.
put key in pos.1 within one minute (don't start).
remove key, wait one minute.
put key in pos.1 then start the cars.

if still problem, use immo emulator.

tiguan
16th September, 2012, 12:37 PM
write oki eeprom with ff.
assembly immo module.
put key in pos.1 within one minute (don't start).
remove key, wait one minute.
put key in pos.1 then start the cars.

if still problem, use immo emulator.


Thanks koncimobil.

I have only 1x black key,
works also with this black key...?

tiguan
17th September, 2012, 08:12 PM
Here is the solution for Immo-off for this Honda ECU,
:wink:
DIY OBDIIa DC2R Immobliser Removal (http://www.ozhonda.com/forum/showthread.php?48704-OBDIIa-DC2R-Immobliser-Removal&) ,works well I have tested.



Good luck
Tiguan

devilkey
24th September, 2012, 07:57 AM
why immo jazz

Golu666
29th May, 2022, 09:16 PM
hello, will this procedure work in 37820-p3x-g01
whether I will not generate the check engine light

Golu666
29th May, 2022, 09:24 PM
it works, but in other p2