PDA

View Full Version : FG-TECH GALLETTO2 BOOT PROBLEM



wyz1056
18th September, 2012, 12:21 PM
any freind have use clone galletto 2 tool boot med17.x
is no can write flash,when chick write flash,soft say:need online checksum,:goodpost:

filou2411
18th September, 2012, 09:49 PM
hello i have the same problem the checksum is no good for med17 with fgtech galletto2

marsete
18th September, 2012, 10:14 PM
Hi friens,in winols 1721 is posible checksum correction in med17.Regards

Overtune
18th September, 2012, 10:37 PM
This is not correct... Checksum is calculated by the software. Also, med17 chk at winols 1721 is very old and cannot recognise most of the files, and 2mbyte files.
What car did you try it on???

wyz1056
19th September, 2012, 12:31 AM
audi a5 2011,
clone galletto 2 is no can write all flash med17.x
when write is error,say,send mod and ori files to company ,

wiseman
19th September, 2012, 12:43 AM
what version of clone are you using?

wyz1056
19th September, 2012, 04:37 AM
firware is 0050.china clone.

Overtune
19th September, 2012, 09:59 AM
A5 2011 is TP. You cannot write with CAN. Only with bootmode. Have you selected the TP option on the bootmode?

wyz1056
19th September, 2012, 03:16 PM
i use boot ,is can read,but no can write flash,must online,i think is checksum,

Overtune
19th September, 2012, 03:57 PM
USE THE TP OPTION ON BOOTLOADER MODE!!! It should work ok, checksum is calculated only when you write external or internal flash alone and not as a whole file(incl. eep + mpc)