View Full Version : best tools and tips for E60
cheester
19th September, 2012, 01:23 PM
Hi Everyone
I will get soon e60 2008 for mileage. Im just wonder what is the best way to do this car.
I have red rosfar for CAS but what is the best tool for dash? 35080 has to be replaced or can be original modify? Upa or Xprog will do the job??
About the CAS is always better do 0km because some people set up for example 10k. Are you disconnect battery always before take out dash and CAS or not?
Needles and easy to take off? Any tips are more than welcome!
Thanks in advance for any help
arvedo
19th September, 2012, 01:47 PM
you can with r270, modifiar cas3 and no need to replace M35080 eprons
markony79
19th September, 2012, 07:41 PM
HI
dont take out the battery,
only remove Key from ingnition,
take out the dash, remove needles, and Read, Save eeprom,
then Errased ,and write the new KM
CAS, can do on the table, but I dont know what tool you have for this
latter, first put back the CAS, then the Dash ,
Ingnition ON and errsed the errors
JOB DONE! Cheers
digimile
19th September, 2012, 07:49 PM
hi
which tool need to erase the errors..
thanks
z786
19th September, 2012, 07:52 PM
red clone shud be fine, u will need to replace eeprom, needles are easy to get off, twist n pull
no need disconnect battery
Digamax
19th September, 2012, 07:58 PM
hi
which tool need to erase the errors..
thanks
DP3 is good for this...
ps: For CAS use RED Rosfar clone. Very good tool!
I have DP3 and Enigma but for CAS I use Red Rosfdar clone.
Best regards
Vladimir
cheester
19th September, 2012, 08:30 PM
Thanks Everyone for help!
One of you advise to replace the epprom , one to erase.
I know it would be more safety to keep original epprom but I dont have new one now.
I hope my red rosfar won't let me down :)
UPA or Xprog will do all job on 35080 with no problem?
About errors, you all mean to clear the car with some diagnostic tool (diagun) ?
z786
19th September, 2012, 09:14 PM
yes clear errors using diag tool
and as for eeprom
if it is:
35080 3
35080 6
then it is erasable and upa shud be fine
if it is:
35080VP
35080V6
D80WQ
then no chance, replace eeprom
on that year i think u mite be out of luck
judor
19th September, 2012, 09:31 PM
See here. This will help to work .
Part 2 - BMW 525I Mileage Correction - Disassemble cluster and CAS2 Module - USA Prog by Smelecom - YouTube
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.