View Full Version : smart for 2 2008
newgeniehex
21st September, 2012, 12:44 PM
hello
some one have a connection for read the mcu
and i would know if this mcu is securised an the reference of this mcu?
can i read whit my upa or codi prog if it is securised
thank in advance
regard
barti122
21st September, 2012, 01:27 PM
try this conection
newgeniehex
21st September, 2012, 01:41 PM
try this conection
thank
i have alredy this picture but my bcu is not same!!
tonight i ,put the picture
regard
newgeniehex
22nd September, 2012, 07:45 AM
thank
i have alredy this picture but my bcu is not same!!
tonight i ,put the picture
regard
HELLO
Look this picture
regard
drahtman
22nd September, 2012, 08:58 AM
Hi,
Here is your solution.
Best Regards,
Drahtman
newgeniehex
22nd September, 2012, 10:03 AM
Hi,
Here is your solution.
Best Regards,
Drahtman
HELLO
Thank
this mcu it is securised or no?
it is : 9S12DG256 or other??
please give me the pinout of color
bkgd rest masse and +5v
thank in advance
drahtman
22nd September, 2012, 12:24 PM
Hi,
I think processor is 9S12. Here is the cable pin compatibility picture. Dashcoder HC12 Cable, X-Tool Cable and Diga 912 cable.
Best Regards,
Drahtman
harius
22nd September, 2012, 12:43 PM
HELLO
Thank
this mcu it is securised or no?
it is : 9S12DG256 or other??
please give me the pinout of color
bkgd rest masse and +5v
thank in advance
CPU is:
145577
newgeniehex
22nd September, 2012, 08:21 PM
Hi,
I think processor is 9S12. Here is the cable pin compatibility picture. Dashcoder HC12 Cable, X-Tool Cable and Diga 912 cable.
Best Regards,
Drahtman
hello
thank
but i dont know the pinout of the color cable
bkgd reset +5v masse??????
many thank in advance regard
iepower
22nd September, 2012, 10:46 PM
This is secured
You also need xtall and xtal gnd
In the upper picture
Viollet = Bkgnd
Orange = 5V
Shwartz = Gnd
Weiss = Reset
ALEXEI
22nd September, 2012, 11:06 PM
dont try Codiprog on this mcu. will damage the flash dump
newgeniehex
23rd September, 2012, 07:29 AM
This is secured
You also need xtall and xtal gnd
In the upper picture
Viollet = Bkgnd
Orange = 5V
Shwartz = Gnd
Weiss = Reset
hello
THANK
but i don't find in the picture the connection for the cristal!!!!
harius
23rd September, 2012, 08:05 AM
hello
THANK
but i don't find in the picture the connection for the cristal!!!!
...
145711
newgeniehex
23rd September, 2012, 01:43 PM
...
145711
hello
thank but i find in your picture one conection for the cristal where is the escond pinout
regard
harius
23rd September, 2012, 02:45 PM
hello
thank but i find in your picture one conection for the cristal where is the escond pinout
regard
to GND....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.