BMW DPF off in I-Drive with NCSExpert

[carmelasse]

Hello

BMW X5 E70 2009 3.0D
I have correct remove DPF in ECU and this part is OK.
Well, when engine start after about ten minutes I-Drive and Dashboard displayed DPF message (In engine ECU no any errors).
I need to recode gateway(?) with NCSExpert to without DPF, but i cannot see this lines in any config files readed from modules.

Anybody help me find correct module to reprogram config file with NCSExpert?

[furnata]

I have the same problem with BMW E60 530XD 2005year. This problem is only for X-models???? Never happend on 525D or 530D for now
Any hints fiends

[druzgotor]

hi,

the simplest way would be to change the vehicle FA and then recode the whole vehicle ("process car")... or at least the KOMBI and CCC/MASK... depends on your NCS-Expert profile

[carmelasse]

My eye is on fire from searching this function in config files from this car.
Where in this files find lines to change?

[ruslan1]

You need damp for dde ecu from car without dpf i have it if you need i send you E70 2009.

[furnata]

Problem solved all was in software maps

[waldi1979]

Hi,

Can you help me, please.
I have the same problem.


TNX.

[alonedark]

the problem is to touch what you don't hya to touch

[waldi1979]

I can try ...