View Full Version : Citroen jumper 2003 km
kevino
27th September, 2012, 01:45 PM
hi boys i need your help. i need km correction on citroen jumper 2003 eeprom 95040. I read it via x prog and make correection via NYO 4. after completed dash. speedometer doesnt work. km dont count. displej shovs 185000km. i have original bin and corrected bin by nyo 4. please check both. tachosoft makes different algorhytm.
now 490480km a need 185000km.
thanks
olegario
27th September, 2012, 02:53 PM
Calculation looks ok.
kevino
27th September, 2012, 03:21 PM
Calculation looks ok.
so why speedometer doesnt work ? i try write back original file and test it on car.
adamopel
28th September, 2012, 09:01 AM
The km correction is ok! have you read/write it correctly? how you read it? via OBD or open the dash? haven't damage any cable/connector/pin?
kevino
28th September, 2012, 10:51 AM
The km correction is ok! have you read/write it correctly? how you read it? via OBD or open the dash? haven't damage any cable/connector/pin?
read write in x prog, verify OK, no damage. yesterday a write original dump back. I am waiting for test in car. customer will call me today. i am waiting his call. I post result.
kevino
28th September, 2012, 12:53 PM
problem solved. customer remove tachograph. :mad:speed signal is going thru. today are open dash for 3rd time. what about tachograph ? is it possible to make km correction too ?
brad123
30th September, 2012, 09:25 AM
the km in stored in is line:
0000: 42 42 0F 00 BD BD F0 FF 42 42 0F 00 BD BD F0 FF
0010: 42 42 0F 00 BD BD F0 FF 42 42 0F 00 BD BD F0 FF
0020: 42 42 0F 00 BD BD F0 FF xx xx xx xx xx xx xx xx
modifies the (42 42 00 0F BD BD F0 FF) by (3 A 3 A 1 c 00 C5 C5 E3 FF)
hope you have help
Nice day
kevino
5th October, 2012, 06:24 PM
all done. OK. dash works. need tachograph to count km.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.