MPPS file 308 kb, why????

[Cordobe1]

hello,

I have a question about the MPPS.
Yesterday I was trying to read a Bora / Jetta 1.8T with ME7 and the resulting file is 308 Kb, when I read my Golf GTI 1.8T ME7 file is 1024.:shot:

Someone can tell me because that difference:questionmark: I can use it in WinOLS:questionmark:

Thank you very much!

[quattrotr]

Car has read protection and noread tag on ECU inside.

[Cordobe1]

Car has read protection and noread tag on ECU inside.

Hello quattrotr,

Thanks for helping! What do you mean by that? is some kind of soft lock for reading? or is a physical blockage? is like an encrypted?

It is possible to remove it?

[k0mpresd]

must read in bootmode.

[Cordobe1]

must read in bootmode.

Only on the bench? :(

[Cordobe1]

must read in bootmode.

sorry for my ignorance ... but the blockade was reading the file or the file?
I ask this because bootmode to read it, if the file is locked I'll be in the same situation. or not?

many tnks 4 heellp!!

[quattrotr]

It might be a encryption board inside that the tuner put in, then boot mode will not work too, or it might be a simple non-read protection (software) than you will be able to read ecu in boot mode.. Eighter way, the ECU was tuned before by someone...

[Cordobe1]

It might be a encryption board inside that the tuner put in, then boot mode will not work too, or it might be a simple non-read protection (software) than you will be able to read ecu in boot mode.. Eighter way, the ECU was tuned before by someone...

Yeah, that was suspected ... This ECU is modified :S

Ok, thank you very much for your help, I'll see if I try the bootmode. -

I keep them informed!

[quattrotr]

ME7.5 boot pins ;)

[Cordobe1]

VERY USEFUL INFO!

thank you very much from the end of the world;)

[camil]

I posted days ago a MPPS version of the sotware that skips noread protection, it's for MPPS V12. Check my posts.

[J_amb_o]

That is ok unless it has an encryption board.

[OVERSPEED]

Galleto read normally from encrypt board...

[Cordobe1]

I posted days ago a MPPS version of the sotware that skips noread protection, it's for MPPS V12. Check my posts.

with MPPS v12 and my cable (HW) can be read by OBDII?

Is this the post? http://www.digital-kaos.co.uk/forums/f173/mpps-sw-12-0-0-6-noread-bypass-287587/

Thank you very much!
:celticparty:

[Cordobe1]

That is ok unless it has an encryption board.

Ok, I'll see you try this option before disassembling the vehicle. - I will consider your comment.- :)

[Cordobe1]

Galleto read normally from encrypt board...

You said that with Galletto 1260 be read over encrypted?

[OVERSPEED]

Yes, even with encrypt board galletto 1260 will read it normally as it read as the processor read the adresses... but obviously you can?t write