Help in choosing emulators for sirius 32

[electrones]

Hi friends

I have a renault clio 1.4 16v II "2002" with AC, problem with immobilizer, system is siemens sirius 32 D.

Would you like make immo off, but some companion suggested emulator, but when searching I found some but all say, except the 1.4L engine.

Can someone help me solve this question, please.

Thank you in advance for all the help, grateful

[woodoo]

Have you tried to do immo off and just cut immo wire before fitting your ECU to car?

[electrones]

Have you tried to do immo off and just cut immo wire before fitting your ECU to car?

Hi friend

Thanks for your help.

No

Not tried because some mate said that the engine will start once only. "with immo off"

Unsolder 1,2,3 times the 44pin PSOP "29f200" make times welding several , not good, so I want a solution and definitive practice.

[javierfichera]

Read 29f200 and put FF in the adress 4000 to 8000, write and sold Psop and work ok. INMO OFF.
Cut PIN inmo.

[electrones]

HI friend

I'll try this, report thankful

[carbyvw]

hi
no,dont work ,the car have CAN comuni...and cant work
with emu because dont have pin58 immo .
only old sirius32 without CAN work with immo off on the
flash and emulator.
there is no 100% working solution for CAN based comunication
(problem with rpm,temp,stering,ac...)

[electrones]

hi
no,dont work ,the car have CAN comuni...and cant work
with emu because dont have pin58 immo .
only old sirius32 without CAN work with immo off on the
flash and emulator.
there is no 100% working solution for CAN based comunication
(problem with rpm,temp,stering,ac...)

Hi friend

Thank you for help

Can someone help me with the resolution, Thankful.

How make key for clio II?

[luis12]

Read eeprom in UCH, and post, you need a new key or clone a Tpx depends on your site facilities other solution is virginize (if change ECM) or emu immo line+virginize.

[ninja123]

A 2002 clio is CAN BUS???, no immo off works fine on this car, repair fault.

ninja

[Milkman]

javierfichera (http://www.digital-kaos.co.uk/forums/members/314598-javierfichera/)-That's no immo off, just virgin.
@electrones- if your ecu have no can transceiver inside post original flash and i will make immo off, 100% tested solution.

[JOSEPH1975]

hi
no,dont work ,the car have CAN comuni...and cant work
with emu because dont have pin58 immo .
only old sirius32 without CAN work with immo off on the
flash and emulator.
there is no 100% working solution for CAN based comunication
(problem with rpm,temp,stering,ac...)

Is is true.

Car start but i had problem on dashboard (rpm always to zero).

Regards.

[helmi reguig]

Is is true.

Car start but i had problem on dashboard (rpm always to zero).

Regards.



try this --------------------------------pass pm
sirius 32 con can
(http://www.ecutuningdata.com/85-file-scodifica-testati-e-funzionanti-al-100/10111-file-di-scodifica-sirius-32-con-can-tutto-funzionante)

[JOSEPH1975]

try this --------------------------------pass pm
sirius 32 con can
(http://www.ecutuningdata.com/85-file-scodifica-testati-e-funzionanti-al-100/10111-file-di-scodifica-sirius-32-con-can-tutto-funzionante)

My Clio is 1.2 8V 60HP with Sirius32N CAN (non 1.4).

Have you a solutions for 1.2?

Regards.

[Shmortz]

for Sirius32 CAN only virgin...

[electrones]

Hi friends

I need immo off for renault clio 2, 1.4l with A.C , siemens sirius 32 D S110030304 8200024377 "AM29F200AB
Is it possible, one immo off 100000% ok because renault is very far.
Help please!!
Grateful

[Milkman]

Your file 1000000000000% off, pass in pm.
Cut pin 58 from ecu plug.

[electrones]

Your file 1000000000000% off, pass in pm.
Cut pin 58 from ecu plug.

Thanks friend, I will report soon

[electrones]

Your file 1000000000000% off, pass in pm.
Cut pin 58 from ecu plug.


Hi friend
Did not work for me

Failure to sign the electro-injectors and coil, voltage "+" is ok, but lacks "-" sign the ecu pulsed.

Solution please, someone can help me please!
THank in advance

[Milkman]

Did you read DTC-s ? I think you have no signal from CKP sensor.

[electrones]

Yes but, there is no dtc
I'll check the resistance of the CKP

[electrones]

Did you read DTC-s ? I think you have no signal from CKP sensor.

1000kman
Thank, thank ..... thank you very much
10000000000000000000% with reason, your file works perfectly, missing signal from CKP connector was loose and unconnected.
The strangest dtc not recorded but is resolved.
Thanked.

[psilos1]

Milkman -Can you send me a pass to the file

[Milkman]

Check PM. .

[say882]

Milkman -Can you send me a pass to the file