MG ZT showing 999999km

[enigmauk]

MG ZT showing 999999km

Anyone come across this before?

Think it may be bad EEPROM? The guy said he hasnt had any correction on it before.

[54321]

Is everthing else on the cluster working ok? If so program with new miles and that should sort it.

[enigmauk]

Yes all needles work ok, does anyone know whats inside the dash and what I can use to calculate?

Anyone got a good dump just incase (2004 end, diesel, manual)? I doubt these have got immo or anything in them?

[smartymarti]

iam asuming by your username you will have the pdfs from enigma that show a 93c46

[enigmauk]

I don't see a pdf for the zt is it same as another model?

[smartymarti]

more than likely rover 25

[obdmaster]

more than likely rover 25

MGZT is rover 75 goes by obd using The legendary Tacho universal. lol

[sterling]

Is it not the same as a Rover 75 ?

[smartymarti]

well from memory although i have been wrong once lol

if he had put pic of dash on then it could have been solved faster

still the mentality of some is questonable

[sparkz02]

Mate, damn you have plenty of problems don't ya? for someone using an Enigma. As mentioned above do the mileage again all will be well.

[enigmauk]

Problems? Or Questions?

I suppose my customers have problems and then I post here for advice... so yeah.

Oh and yes I got Enigma but the problems aren't with Enigma... they were obviously caused by something else as its the first visit by this customer.

[smokey08]

Mileage wont go by OBD with TU when its showing 999999. Just reprogram mileage directly on the chip and it will be ok. Ive done this many times.

[diagtech]

chip is 93s56 make sure you program as an s chip not a c chip

[enigmauk]

I will solder points to board, but I got a good feeling this will be a bad dump because it is showing 999999km and editing a bad dump may not work?

[smokey08]

It is only a checksum problem caused by an electrical spike. eeprom contents will be ok.

[enigmauk]

Ah ok I'll give it a try tomorrow hopefully

[diagtech]

Will be hard work to put another dump in as there are a lot of different sw versions on these and they are not interchangeable make sure you save original first

[z786]

@enigmauk

have u had the new update for ur enigma today?
every1 was given one, the security one?

[enigmauk]

Yeah I got it via email today. Do you need it?

[z786]

yh that wud be great, post it here?
did mickey himself send it to you?

[digital daz]

I will solder points to board, but I got a good feeling this will be a bad dump because it is showing 999999km and editing a bad dump may not work?

What solder points r these can you share PDF ?..

[enigmauk]

who is micky???

[smokey08]

who is micky???

Have you not spoken to micky? where did you buy your enigma?

[enigmauk]

I usually speak with Banny, it was Banny that sent out the email today?



Hi,

Here is the fixed update.

I will be sending instructions later for information on how to join the cloud to download PDF's

Banny

[z786]

mickey is main distributor for UK
only he sends security updates????

[fes_786]

yeh mickey is always on the ball

plus u can ask any question 24/7 he availabe on phone

helpfull for midnight correction

got a email of mickey about 6hrs before banny .........pmsl

[honingkoning]

yeh mickey is always on the ball

plus u can ask any question 24/7 he availabe on phone

helpfull for midnight correction

got a email of mickey about 6hrs before banny .........pmsl

Are we talking about Mickey mouse and bugs banny.

I recieved my update from Mickey yesterday, enigma for life.

:smokin:
Regards Adam.

[z786]

u CANNOT have bought an enigma if u didnt get ur updates from mickey

u said u recieved the update, can u post here to see if its same 1?

[enigmauk]

Are you insane? I've got an enigma here mate so I'm pretty sure I have bought one. And as for the update... there is no need to post it here as people with an enigma should already have it... file details are...

enigma_last.eup
1664K

And I'm pretty sure Revtronic are the main distributor in the uk.... or atleast thats what I thought when I purchased.

[z786]

insane? no!!
whats the need to insult?
u wudnt appreciate it if i grilled you?

[raf0468]

as a loyal enigmauser i was given a FREE!! update from mickey..

[smartymarti]

i got mine from mickey , always on tip top form

[z786]

how long hav u had ur enigma?

[enigmauk]

Lol what is this the enigma police? Do you want a ppicture with me holding it or something

[z786]

no pictures, jus wana know how long u had it

[smartymarti]

i wish i had one , rolling with the big guns

[enigmauk]

Lol why is how long I had it a concern to you. I've not had it long

[smirnoff_rules]

wots this , my enigma's better than yours lol

does anyone know why this guy as 999999 on his dash lol

[enigmauk]

My enigma is newer than yours... don't get why it matters

[z786]

it matters because you are tryin to fool the forum in being in the game along time in order to recieve help

you have only been doing this a few days judging by your posts so i assume you are charging peanuts, tell me im wrong?

[enigmauk]

That is not the case at all. Why is this such a issue to you then. It sounds as though my prices may be affecting you or something. I charge reasonable prices. End of.

[z786]

lol it doesnt affect me, my prices stay the same my cutomers are loyal, very rarely do i ask for help n if i do its from friends in the trade, when i get a call for a job, i'l only ever ask to call them back to check my diary to see if i can fit them in, not ask on DK then get back, but there might be some1 in ur area that u might be affecting, they have to feed themselves, maybe they hav a mortgage, why affect their bread and butter?

[enigmauk]

Lol so by me providing mileage correction I'm affecting someone's mortgage oh grow up will you. Competition will come and go get over it. And looking at your history back in 2010 2011 you were posting for plenty of help and support from fellow members. This is a forum where people will discuss topics and maybe help each other at the same time... my posts will probably even help someone else in the future too.

[z786]

not by you providing mileage correction, by you charging pennies, driving prices down.

and if you went thru the hassle of checking my history it is help regarding "diagnostics" which i used to do to help the local garages and now refuse to do so

[enigmauk]

What makes you think I'm charging peanuts then?

[z786]

No.1
You forgot to call back and let your number thru

No.2
If you really wanna know where i am, ask any1 in edgbaston for "AK" and they'l surely tell you who i am and what im under

No.3
Whats the reason you wanted to know where i am?

No.4
You dont wanna know go down that line wit me, im not some dcikhead off the streets, and if its beef your looking for remember you foned my fone 1st to start it

i suggest u take my advice, i have asked u nicely

[TULGEYWOODMAN]

Well its nice to see the forum going off topic stil!


ON TOPIC

change the eeprom for a 93c66 , redump, change miles....job done

[enigmauk]

iam asuming by your username you will have the pdfs from enigma that show a 93c46

The enigma PDF's show a 93S56 mate

[TULGEYWOODMAN]

The enigma PDF's show a 93S56 mate

well you would change the eeprom for the equivalent 93CXX ,obvious!

[sparkz02]

Well its a small old world when you think about if a new guy gets an enigma, gets happy has a big bill to pay charges peanuts,

Easy to spot due to their advertisements which will say stuff like, ''USING LATEST ENIGMATOOL 2012...ONE OF THE BEST TOOLS ON THE MARKET FOR CALIBRATIONS / CORRECTIONS.. '' prices starting from ?30.

I don't normally get involved in these type of posts, but just to show from your nickname & your advertisements & the posts of these forums, its easy to put 2 and 2 together,

Also if you want help change the tone,

[smartymarti]

i think its all like a chameleon , folk change there colours names attitude everyday

[enigmauk]

I dont understand? I havent got a big bill? This is a car from a trader who took the car in as a part exchange... I am merely trying to help him... I havent messed up this car if thats what you think?

And as for my attitude... I havent got one

[enigmauk]

I have re-programmed the mileage on this using enigma... it wouldnt read the old mileage but according to the enigma pdf's it sometimes wont read the old value... even the dumps i tried off this forum didnt read correctly in licznik... so seems to be a common thing with this particular car.

will let you know how i get on tomorrow when i try it in the car. thanks for help guys

[TULGEYWOODMAN]

I have re-programmed the mileage on this using enigma... it wouldnt read the old mileage but according to the enigma pdf's it sometimes wont read the old value... even the dumps i tried off this forum didnt read correctly in licznik... so seems to be a common thing with this particular car.

will let you know how i get on tomorrow when i try it in the car. thanks for help guys

So you didnt try a new eeprom then?

[TULGEYWOODMAN]

yeh mickey is always on the ball

plus u can ask any question 24/7 he availabe on phone

helpfull for midnight correction

got a email of mickey about 6hrs before banny .........pmsl

I usually speak to his secretary Minnie

[TULGEYWOODMAN]

MG ZT showing 999999km

Anyone come across this before?

Think it may be bad EEPROM? The guy said he hasnt had any correction on it before.

START AGAIN

Did you reprogramme this OBD to start with?

[enigmauk]

No mate the car came with 999999miles on the dash probably caused by a jump start. I changed the mileage with enigma and now it's all working g great... no need to replace eeprom

Thanks guys

[TULGEYWOODMAN]

MG ZT showing 999999km

Anyone come across this before?

Think it may be bad EEPROM? The guy said he hasnt had any correction on it before.

I am totally confused.
Why didnt you just do it with enigma then, in the first place?

Why all these posts?

[ALEXEI]

he is trying our knowledge

[smartymarti]

I'd rather say he's just trying

[54321]

Are you taking calls for jobs then posting it up on here before going out to the job? If so its a bit of a waste of time, 4 pages later when you could of just gone out to the job and tried first, then if you get stuck or can't work it out post it on the forum.

[enigmauk]

no the guy didnt want me to come down till morning... i would have tried with my enigma right away but i thought id see what others have experienced on here.