PDA

View Full Version : DM500 unable to get Sly 1



ZiderIup
14th February, 2009, 09:43 PM
Hi All,
can not seem to get Sly 1 any one having the same problem all other channels working fine, done a rescan still the same.:hmmmm:

apparos
14th February, 2009, 09:47 PM
this is a test post....

darp
14th February, 2009, 09:47 PM
It be working fine for me..........

ZiderIup
14th February, 2009, 09:49 PM
hmm maybe a signal problem then only guessing

mikeyb
14th February, 2009, 10:25 PM
If you have a genuine dreambox 500 it can be difficult for the tuner to pick it up (apparently it is because sly1 at a lower frequency, don't know if its true or not).

Few tips:
try a booster
scan in the middle of the night (someone told me this once)
scan without the any boosters attached.

Do a search through the forums, this topic is knocking around somewhere and you'll get some more advice.

ZiderIup
14th February, 2009, 10:48 PM
Thanks Mikeyb
I will have a look

dreadfand
15th February, 2009, 03:55 AM
see if you've got a signal attenuator floating about they usually come with ntl boxes and will give you a better noise to signal ratio....might help

other than that you could manually add the transponder frequencies for sly one yourself pm me if you need them

Dreadfand

gmb45
15th February, 2009, 05:57 AM
Hi All,
can not seem to get Sly 1 any one having the same problem all other channels working fine, done a rescan still the same.:hmmmm:did u check all channels u picked up after your scan may be hidden