Log in

View Full Version : Cant access 9991 menu on blade 7000s - but i know its working??


Server1
7th October, 2012, 12:33 AM
Hello, I have a blade media 7000s flashed with the lastest firmware allowing the 9991 menu. I have inputted my details and it works.....however a few minutes after or perhaps after turning off the box the 9991 menu is no longer accessible...but i know its working since the channels are decrypted and working fine! however when i press 9991 nothing comes up.

This is very strange....The only way to get back the 9991 menu is to do a factory reset. As I said i know its live since the channels are decrypted however you cannot access the menu until factory resetting it. Im using the latest firmware patched BM7000s May 14 2012 86x


Thanks
seamouse
7th October, 2012, 01:26 AM
as far as i read up, u have to factory it each time to add a line
ramjet
7th October, 2012, 08:00 AM
as far as i read up, u have to factory it each time to add a line

never been the case with any blade bm7000s that I have setup

pressing 9991 when on any channel always brings up the hidden menu on a patched blade
ramjet
7th October, 2012, 08:07 AM
Hello, I have a blade media 7000s flashed with the lastest firmware allowing the 9991 menu. I have inputted my details and it works.....however a few minutes after or perhaps after turning off the box the 9991 menu is no longer accessible...but i know its working since the channels are decrypted and working fine! however when i press 9991 nothing comes up.

This is very strange....The only way to get back the 9991 menu is to do a factory reset. As I said i know its live since the channels are decrypted however you cannot access the menu until factory resetting it. Im using the latest firmware patched

BM7000s May 14 2012 86x


Thanks

the correct firmware is actually mar 14 2012 83x

that later may 2012 one was a beta firmware I believe
lac
7th October, 2012, 12:08 PM
Latest stable version for the Blade Media BM7000s - 14/05/12 - RECOMMENDED

From BM site.
dodgy dell
9th October, 2012, 12:18 PM
Latest stable version for the Blade Media BM7000s - 14/05/12 - RECOMMENDED

From BM site.

If its from the BM site it wont have the 9991 feature. Its as Ramjet says above.
lac
9th October, 2012, 12:34 PM
If its from the BM site it wont have the 9991 feature. Its as Ramjet says above.


New firmware BM7000s - May 14 2012 86x

Has 9991 menu

1.You Tube compatible... fixed.
2.Blade online ... updated.
3.Rare system... halt fixed.
4.Videoshare updated

thanks HiTeck