DEVTOOL for ALL

[shisik]

does not require crack

file delete

:rock:

[hanzem evr]

this Pach for what ?? Please explain

[dimitar22]

I tried it in simulator mode i get error 1000.
Is it tested on truck does it work?

[shisik]

obligatory to be replaced with the file

[ishell]

Have same error 1000 in sim mode .

[dimitar22]

someone tested it on truck?

[jose breno vieira silva]

can make a demonstration how to install and use?

[hanzem evr]

PLease Freind .. any body an tell me about this DEVTOOL..

what is for???

[ukge4122]

To change parameters in the vehicles, and there min and max values what you want sensors etc to work at

change chassis id immo etc

[hanzem evr]

Thanks , but which vehicles and which Software ??? is it PTT ???

[jantavrik]

PEOPLE PLEASE HELP ME i TRY THIS DEVTOOL ON TRUCK AND AFTER PROGRAMING I HAVE THIS ERROR AND THE TRUCK IS BROKEN PLEASE ANY ONE CAN HELP ME?

[volvo01]

what did u programm???

[thabaned]

how does one upgrade firmware to show sy channels on blade bm7000s

[dieselequipos]

PEOPLE PLEASE HELP ME i TRY THIS DEVTOOL ON TRUCK AND AFTER PROGRAMING I HAVE THIS ERROR AND THE TRUCK IS BROKEN PLEASE ANY ONE CAN HELP ME?


friend jantavik itd posisble you change any parameter but this tool dont change a good checksum and contro unit fault

[dophaminum]

i jast try use it crack, when I pressed the button programming, PTT close and mid128 NOT WORK!!!
what do I do???????????????!
please help!

[shisik]

i jast try use it crack, when I pressed the button programming, PTT close and mid128 NOT WORK!!!
what do I do???????????????!
please help!

replaced with the file!!!!

[parezoo]

does not require crack

149313

:rock:

Thanks a lot, but can you please explain how does it work, do we need to install it on Vcads Pro in Development Mode? or does it work stand alone?

[dophaminum]

replaced with the file!!!!
shisik now i need need replace ecu mid128 is broken and not a file
repair cost about 1000 euros!!!!!!!

!!!!!!!!!!!!NOT USE IT CRACK!!!!!!!!!!!!

[shisik]

Thanks a lot, but can you please explain how does it work, do we need to install it on Vcads Pro in Development Mode? or does it work stand alone?

works with PTT

[jantavrik]

shisik now i need need replace ecu mid128 is broken and not a file
repair cost about 1000 euros!!!!!!!

!!!!!!!!!!!!NOT USE IT CRACK!!!!!!!!!!!!

i have to problem and call guy from volvo center for check ,truck is broken and cant see vecu mid 144 , i think this exe is not for play with truck, i change fuel tank size all ok , them go to change some in vecu and on programming time the program is hang after them the ecu is dead, so i wait for volvo center guy to see how much is the cost from damage

[shisik]

i have to problem and call guy from volvo center for check ,truck is broken and cant see vecu mid 144 , i think this exe is not for play with truck, i change fuel tank size all ok , them go to change some in vecu and on programming time the program is hang after them the ecu is dead, so i wait for volvo center guy to see how much is the cost from damage

remove this program from your computer and do not use

[dophaminum]

remove this program from your computer and do not use

Who will compensate for repairs???????????????????

[dophaminum]

i have to problem and call guy from volvo center for check ,truck is broken and cant see vecu mid 144 , i think this exe is not for play with truck, i change fuel tank size all ok , them go to change some in vecu and on programming time the program is hang after them the ecu is dead, so i wait for volvo center guy to see how much is the cost from damage

Do not blame HIM
The decision was yours and my,to test on truck.

[jantavrik]

Do not blame HIM
The decision was yours and my,to test on truck.
And for you valid any more Sir

[uzara]

And for you valid any more Sir

Hi
Modified software is never without risk!
Even not in original manufacturers!

regards

[dieselequipos]

its possible te ecu , checksum bad becuase i thin thia cause bad programming

[shisik]

the program was considered non-working and have been removed

[wwllsxd]

the program was considered non-working and have been removed


considered ? what do you mean

[jose breno vieira silva]

hello
DEVTOOL tested here in a module vecu MID 144 bench and he changed the chassis and he did not give any problem, did it about 6 times it is normal, gave no error
now missing plug into a vehicle to confirm

[tomushas]

hello,
I make in MID128 injector calibration and no problem. I see that jantavrik (http://www.digital-kaos.co.uk/forums/members/167538-jantavrik/) user ID is M110727. I use M311331 and think this may be a problem. But I'm not sure that. In simulation mode i get so error, but real then i connect to truck i get no problem.

[jose breno vieira silva]

connected will vecu that changed the chassis number of the vehicle
worked perfectly, did not give any error
now missing in a test ECM

[jantavrik]

hello,
I make in MID128 injector calibration and no problem. I see that jantavrik (http://www.digital-kaos.co.uk/forums/members/167538-jantavrik/) user ID is M110727. I use M311331 and think this may be a problem. But I'm not sure that. In simulation mode i get so error, but real then i connect to truck i get no problem.

Hello

friend tomychas programming injector you can and without devtool with select STORAGE PROGRAMING, i dont know guys i try it and have problem today change vecu(used because new is expensive)and reprograming it, i afraid this program , maybe the problem is because is it not stability some time can give error and some times not, but i afraid to use it. pay today for vecu and delaer programing and the cost is not small. Thanks Regards

[sinkhi]

Hello

friend tomychas programming injector you can and without devtool with select STORAGE PROGRAMING, i dont know guys i try it and have problem today change vecu(used because new is expensive)and reprograming it, i afraid this program , maybe the problem is because is it not stability some time can give error and some times not, but i afraid to use it. pay today for vecu and delaer programing and the cost is not small. Thanks Regards

Can you help me, how to program injector without devtool or connection to a central system? I would not want to become something of ECU engine repair is expensive. Thank you for some help

[jantavrik]

Can you help me, how to program injector without devtool or connection to a central system? I would not want to become something of ECU engine repair is expensive. Thank you for some help
ofcorse i can , send me please your skype i show you via teamviewer online on ecu
Regards

[tomushas]

Hello

friend tomychas programming injector you can and without devtool with select STORAGE PROGRAMING, i dont know guys i try it and have problem today change vecu(used because new is expensive)and reprograming it, i afraid this program , maybe the problem is because is it not stability some time can give error and some times not, but i afraid to use it. pay today for vecu and delaer programing and the cost is not small. Thanks Regards
first when i want reprogram injector PTT connect to server, but now requires no connection

[jantavrik]

first when i want reprogram injector PTT connect to server, but now requires no connection
yes you have right, but for injector or speed limmit fuel tank size programing can do it without any other programs
them have messange but can ignore it
Regards

[parezoo]

hello,
I make in MID128 injector calibration and no problem. I see that jantavrik (http://www.digital-kaos.co.uk/forums/members/167538-jantavrik/) user ID is M110727. I use M311331 and think this may be a problem. But I'm not sure that. In simulation mode i get so error, but real then i connect to truck i get no problem.

Hello,

Are you in Development Mode? what crack do you use to get M311331?

Thanks

[jantavrik]

Hello,

Are you in Development Mode? what crack do you use to get M311331?

Thanks

I use development mode with levels , is not crack i buyed license

Regards

[m5361]

Hi to all

Why file deleted??

If it work, please share it for all

Regards

[jantavrik]

guys i find diagramm for FH can anyone need it
here the link:smokin:
https://www.rapidshare.com/files/3515349950/88956883-Wiring_Diagram_FH.pdf

Regards

[dimitar22]

Hello,

Are you in Development Mode? what crack do you use to get M311331?

Thanks


Crack gives different user every time you start the user doesn't meter it has nothing to do, even if you use the same crack you will get different user. Some time ago there was one patch on DK which was giving the same user every time but it was for PTT 1.10 .

[hugos31]

guys i find diagramm for FH can anyone need it
here the link:smokin:
https://www.rapidshare.com/files/3515349950/88956883-Wiring_Diagram_FH.pdf

Regards
i need devtool

[jantavrik]

i need devtool
i like KAMAZZZZ:beer:

[tomushas]

today i change chasis ID in MID144. And all ok.

[hugos31]

http://https://www.youtube.com/watch?v=02UjhLFmthE :santaclaus:

[hugos31]

i like KAMAZZZZ:beer:
we have something in common. Greetings from Peru

[shisik]

we have something in common. Greetings from Peru

Thank You still accepted;)

[hugos31]

system; operativo.windows XP sp3. is necessary? for devtool ; id user M333422

[m5361]

Hi again

The file deleted....

Share it again please

[jantavrik]

Hello guys anyone know how can activate guide diagnostic for new trucks?

Regards

[tomushas]

Hello guys anyone know how can activate guide diagnostic for new trucks?

Regards
http://www.digital-kaos.co.uk/forums/f166/volvo-developer-tool-198943/index6.html

[frumos]

Where actually this file - about which all speak - I don't see it?

[hugos31]

Thank You still accepted;)
I have tech tool 1.12 with standard VCADS... devtool works with this ? or volvo deloper tool PTT 1 ?

[shisik]

I have tech tool 1.12 with standard VCADS... devtool works with this ? or volvo deloper tool PTT 1 ?
AftermarketDB - standard
ManufactureDB - devoloper

[frumos]

Update the file - be the person?

[jantavrik]

hello guys anyone work via wifi with adapter 88890180?:embarassed:

[hugos31]

?????????????????????

[dieselequipos]

hello guys anyone work via wifi with adapter 88890180?:embarassed:


dont have wifi

[sinkhi]

see here: https://www.premiumtechtool.com/assets/mack/PTTV3OnlineSite/WirelessConfigurationofthe88890020CommunicationAda pter.pdf
adapter 88890180 is just the same as 88890020 a protective cover

[Belefronte]

I have a VNL with automatic transmission but I changed it for a manual and changed the parameter of automatic transmission from ECU but I cant make start properly :/ what it's missing that I cant see any suggestion?

[hugos31]

kkkkkkkkkkk

[yacek4]

please download link

[sattv1244]

01:43 Apr 12,2013
http://img.alibaba.com/images/cms/upload/wholesale/feedback/icon_new.png
I have replaced APCIdb.dll
My
And when I running Dev Tool-ManufacturerDB-connect,
I have a window C/Program File/ Diagnostick Communication/2/ManofactureDB/database/m9apcidll
current path not exist, check current path name or check connecting to server.

I have check and I have not /ManufactureD/database/m9apcidll file on my computer
What do I wrong?

Regards

[shisik]

program only works when the system is on the drive C:\

[diboa]

hello friend I need some help, how to turn on devtool volvo ptt installed with Windows XP SP3 crack M333422, since ja thank you for attention

[jakani]

please dk need devool urgently

thank


email : autodiagnostic.hot@hotmail.com
skype: jakaniteam

[toshor]

Hi shisik thank u for the soft ware (DEVTool) I am having a problem with it in development mode every thing is good until I open up for programing and I get an error message with error 1000 and will not open window
any input would be good
Thanks toshor:smile:

[shisik]

replace the dll in archive