PDA

View Full Version : nissan navarro dci



ngoncalo
15th October, 2012, 08:22 PM
please can someone remove fap from file? ecu denso 2q 23710 4x03a.
thanks

ngoncalo
18th October, 2012, 02:52 AM
please any help???

ngoncalo
19th October, 2012, 03:09 AM
nobody know how?

kfprint
20th October, 2012, 07:16 PM
nobody know how?


removing the dpf from this denso is not hard, in fact its very easy. Software is not the problem

the trouble with these cars in that you need the dealer tool to perform resets after.

also If any of the sensors are failed, egt sensor, pressure sensors then its unlikely the DPF delete will work for long and the light comes back on because of the fault

autobamm
20th October, 2012, 08:41 PM
check this m8

ngoncalo
21st October, 2012, 12:58 AM
autobamm file same as ori, i compare bin no diferences. can you give a look?
thanks

mexanico1971
21st October, 2012, 05:43 AM
autobamm file same as ori, i compare bin no diferences. can you give a look?
thanks

pass to compare please !

PM me if you want !

autobamm
21st October, 2012, 09:07 AM
m8... there are 397bytes difference... so please compare it again.
don't share password... a lot of "sharks" need solution for this ECU

ngoncalo
21st October, 2012, 09:33 AM
i compare with winhex no diference of ori file, mate

autobamm
21st October, 2012, 09:41 AM
friend.. write file I sent to you and stop comparing... you loose your time.

mexanico1971
21st October, 2012, 05:56 PM
it"s mod !....................

ngoncalo
24th October, 2012, 11:45 PM
Friend thanks for all, but car only work good one day, now its again without power. can you give another look??. thanks

ngoncalo
27th October, 2012, 02:13 PM
please can someone give me a help???
thanks

fred39
27th October, 2012, 03:19 PM
removing the dpf from this denso is not hard, in fact its very easy. Software is not the problem

the trouble with these cars in that you need the dealer tool to perform resets after.

also If any of the sensors are failed, egt sensor, pressure sensors then its unlikely the DPF delete will work for long and the light comes back on because of the fault

Hiya, I have a Navara 2007 that I require the DPF removing from ECU.
I'm a nissan master tec by trade and have not done this type of thing before, I have the deal tools but they are unable to remove the DPF from ECU
My question is how and what equipement do I require to carry out DPF off on the denso ECU
Cheers for any help

ngoncalo
27th October, 2012, 09:57 PM
you only need a programmer to read it, i use piasini and the right file.

fred39
28th October, 2012, 11:28 AM
you only need a programmer to read it, i use piasini and the right file.
Where would I get the right file from?

Gery
14th November, 2012, 07:14 AM
Dtc and limiters after amendments, do basic diagnostics and adjustment works.
It is not enough data to zero particulate filter, but injecor adaptation is set to zero. :-)
We fought a lot with it, but the temperature sensors, except everything has been removed from the program.
(Indeed, many families already moving in the forum, I have unfortunately experienced)
The program cost 400usd.

If you are interested, please write privately.

ngoncalo
29th November, 2012, 12:28 AM
please any help. still dont work.
thanks

autobamm
29th November, 2012, 08:55 AM
last month i made one nissan with identical software you have and works ok after 4500 km.

Miketune
29th November, 2012, 11:20 PM
please any help. still dont work.
thanks

test this file...

MB275800 - 7451 Denso

pass pm

powertdi
2nd December, 2012, 06:33 PM
First time I start with this car I have 3 solution from other tuners but nothing work. Day by day I use emulators on it and it work perfect.... BUt now I have my own solution. Original read w/o dpf. with injectors adaptation work perfect.:wink:

ngoncalo
3rd December, 2012, 05:08 AM
mike caqr ok, just have the issue of send a litle white smoke, but ok.
thanks friend for your time and help,

atd
11th December, 2012, 01:27 PM
Does anybody tested Swiftec solution with this ecu?
Does injectors coding necessery after reflashing?
I have navara 2007 year 2,5dci
Denso MB275800-6734
23710 eco3c.
Trouble code P2002,
After DPF washing still this fault is present. Filter is clean... Car has limp mode, the check light is on.
I'm thinking about dpf removal but don't have Piasini....Any good solutions to solve this problem?

Regards

Stanton
11th December, 2012, 08:44 PM
Swiftec solution does not work on this ecu.

ngoncalo
16th January, 2013, 09:23 PM
car as no power in low rpm with last file after run 3 days

S.W.A.M.I
28th August, 2016, 09:07 PM
found working solution