clone

[nigelc]

Just discovered my eurovox max is a clone and i am after downloading the ufl for the real thing. Does this make the box useless . The menu comes up when i use the co ax lead but the remote wont work on it now to enter the pin.

[HiTeck]

Flash with the clone-safe firmware

You need the firmware >> Digital Kaos - Downloads - Eurovox Blue Clonesafe UK Fix 011208 (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/eurovox-blue-clonesafe-uk-fix-011208-473/)

and the loader >> Digital Kaos - Downloads - DnUpMan firmware flash program (http://www.digital-kaos.co.uk/forums/downloads/tools/30/dnupman-firmware-flash-program-126/)

Run the loader add the bin file (firmware) and press download.

[nigelc]

Flash with the clone-safe firmware

You need the firmware >> Digital Kaos - Downloads - Eurovox Blue Clonesafe UK Fix 011208 (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/eurovox-blue-clonesafe-uk-fix-011208-473/)

and the loader >> Digital Kaos - Downloads - DnUpMan firmware flash program (http://www.digital-kaos.co.uk/forums/downloads/tools/30/dnupman-firmware-flash-program-126/)

Run the loader add the bin file (firmware) and press download.
Thanks a mil hitech. That worked gr8. Have all the stations using the coax cable. How do i get it to work on the scart now. Sorry for being a pain with all the questions. thanks again.

[concept122]

once you have flashed with clonesafe firmware you shoud be able to switch straight back to scart any problems and do a factory reset followed by powerscan

[name750]

Thanks for this also.
This is exactly what i needed.
I've been looking for the program as well.
I spent hours googling cos some put that it was called dumpman.
Now all i got to do is wait until I'm allowed to download :(
cheers