PDA

View Full Version : Chiptuning lessons (for starters)



bijlaard
20th October, 2012, 03:58 PM
Hi all

As a "wanabee" tuner, I came accros this guy, witch provides lessons in tuning by video.

The cool thing about this is you can watch it over and over until you understand and do it part by part yourselve
He uses for the lessons the program WinOls witch I found and downloaded here @ DK.

I did 3 lessons while watching the vid's and I can make my first simpel Diesel tuning. (163 to 185 hp versions)

There is a little part of it on Youtube from lesson 1 EDC16intro - YouTube (http://www.youtube.com/watch?v=qlRpfJwSR3U&feature=youtu.be)

Think this somewhere usefull for people like me who just want the first basic steps done


rgds

Babos
20th October, 2012, 04:26 PM
in youtube is only intro! where you see all version?

MarkPRP
20th October, 2012, 08:40 PM
you have to buy them from him!

benzerrouki
20th October, 2012, 09:25 PM
Hi all

As a "wanabee" tuner, I came accros this guy, witch provides lessons in tuning by video.

The cool thing about this is you can watch it over and over until you understand and do it part by part yourselve
He uses for the lessons the program WinOls witch I found and downloaded here @ DK.

I did 3 lessons while watching the vid's and I can make my first simpel Diesel tuning. (163 to 185 hp versions)

There is a little part of it on Youtube from lesson 1 EDC16intro - YouTube (http://www.youtube.com/watch?v=qlRpfJwSR3U&feature=youtu.be)

Think this somewhere usefull for people like me who just want the first basic steps done


rgds

Good post keep going

bijlaard
21st October, 2012, 09:40 AM
you have to buy them from him!

Yes , This guy earns his living with tuning, so it's not for free.
He has to eat like everybody.

I don't care to pay for good stuff (payd for bad stuff al lot of times to ) in my opinion this is good stuff, because it works and the first tuning i have done now myself.

rgds

stefaudio
21st October, 2012, 10:34 AM
HI are dhis compani make chiptuning only to volvo cars???

bijlaard
21st October, 2012, 03:14 PM
Don't know,
U have to ask him (mail), maybe an experienced tuner can answer the question ?, (if there is much difference in how to do tuning.)

rgds

whoslucky
21st October, 2012, 05:19 PM
Once you learn to tune one fuel system (EDC16 or something else) the rest becomes very easy. Just some time, patience, and digging you can find everything you need. The best help comes from comparing an original to a modified file if you can get one.

So someone who tunes for one car can likely tune for another with a bit of research :)

luis12
21st October, 2012, 06:09 PM
Will send Email, looks very proffesional.

darius89
21st October, 2012, 08:41 PM
How much he charge for video ???

jnoroeste
22nd October, 2012, 07:48 PM
Once you learn to tune one fuel system (EDC16 or something else) the rest becomes very easy. Just some time, patience, and digging you can find everything you need. The best help comes from comparing an original to a modified file if you can get one.

So someone who tunes for one car can likely tune for another with a bit of research :)

Hi M8?s,

Yes, if modified is really well tuned!

If not......

Tunning takes long time to learn, showing more "advanced" skills this guy could achive better sales results.

Regards.

whoslucky
22nd October, 2012, 09:05 PM
Tuning Video Series, EDC (http://www.ardtuning.com/Tuning-Video-Series-EDC_p_101.html) Here's the page on the website...

darius89
29th October, 2012, 07:59 AM
Anybody else has it ???

mtnt
29th October, 2012, 03:58 PM
What You think about group buy??? we need 12 persons with me is 13 so we can bay for 50p xD

mtnt
29th October, 2012, 04:17 PM
what You think about group baying?

xryst
29th October, 2012, 04:42 PM
Tell me where you can buy the full version?

mtnt
29th October, 2012, 07:33 PM
on his page. Maybe i wrong understand... this what hi offer is cd with video " how to tuning..".. yes??
if any one is interesting send priv message.
regard

somad
2nd November, 2012, 12:08 PM
He is very good at getting information and support from other people for free, and gladly accepts the guru status from his fans.
He may still be smart and a good teacher, but it just doesn't feel right to support his business.

motocarlos
2nd November, 2012, 12:28 PM
hello,

here it is some things to help.

regards.

bijlaard
3rd November, 2012, 11:04 AM
He is very good at getting information and support from other people for free, and gladly accepts the guru status from his fans.
He may still be smart and a good teacher, but it just doesn't feel right to support his business.

That , is your opinion, and yes you are free to have your opinion.

I on the other hand, think that people who work and have this bussines for a living may earn their bread and butter .

When I learn from this guy in a nice and slow way how to do small diesel tuning for beginners I have no problem paying for this.

When you have a real bussines in tuning and you have to eat from your tuning, I cannot imagine you would do everything for free.

I started this thread because I found a nice way to learn a small bit about what tuning is about and wanted to share this information to others who are in the same possition as me.

This forum as I think, is for sharing information and helping others, when I think i have a usefull answer or a usefull post or a question, I post it on DK, Hoping to beable to help and get help.

When I want a good tuning file, I send the ori to one of the tuners (also here on DK) and I pay when i get the modded file back, because they have to work to make it for me.

So when someone takes the work to make learning video's , he works (that is his bussines) and I pay for that.

Conclusion : For me it's ok to support somebody's bussines when he takes the time and effort to make something.

just my 2 cents
rgds

somad
3rd November, 2012, 04:57 PM
I have no problems with people making money of their own hard work.
Gathering information and presenting it in an easy and understandable way may also be worth the money.
I'm just hoping the source of the information is also happy.

I also do not blame anyone for sharing information that they think are useful for others.

I'm not a big fan of passwords and forum limitations. It can easily stop development benificial for the general public.
I do however understand why many people feel the need to control the information flow better.
http://www.digital-kaos.co.uk/forums/f166/pass-no-pass-192344/

physyc
4th November, 2012, 10:19 AM
I'm not sure, but my feeling tell me not to take tuning lessons from a scateboard an t-shirt designer.
could be wrong...

Skateboards or not, i realy don't understand why to pay 650 euro to explain 2004 technology.

spend a little more on ORIGINAL software and a TEAM with good customers service.

Instead of paying 650 euro for a video and steal some software.
You better pay for software and ask help from pro's.
you will learn more...

bijlaard
5th November, 2012, 02:33 AM
I'm not sure, but my feeling tell me not to take tuning lessons from a scateboard an t-shirt designer.
could be wrong... until now, what he's told us is opening the world of tuning for us newbees.

Skateboards or not, i realy don't understand why to pay 650 euro to explain 2004 technology. Nobody else is doing it, the edc16 for volvo goes until 2011, maybe old technology, I don't care, I need the information how to do it.

spend a little more on ORIGINAL software and a TEAM with good customers service. I buy ori winols, I buy bdm100 ori, I just need people to explain how to work with it to make simple D5 tuning
Instead of paying 650 euro for a video and steal some software. Did you watch the video ?? .. (answer is no) It takes a newbee step by step, how to tune a D5 edc16c31
You better pay for software and ask help from pro's. Where is that availeble for a newbee,/wanabee tuner ???
you will learn more..As written before, I pay for everything people provide me with.

Just tell me where to get all info I need :-)

mbtun
5th November, 2012, 03:12 AM
Well for me this is more like advertise. The demo video was uploaded 20.oct. The initiator of the topic guess what? opened the topic on 20.oct :))

stefaudio
5th November, 2012, 07:21 AM
oooppss :):):)

looly
5th November, 2012, 10:12 AM
Well for me this is more like advertise. The demo video was uploaded 20.oct. The initiator of the topic guess what? opened the topic on 20.oct :))

If u r trying to imply that member "bijlaard" is the author of the video then I can assure u that u r mistaken. He/she has simply said how useful they r finding the tutorials. The other day I recommended to a dk member to purchase an original upa from elrasoft as I find it a very good product..did I do this to advertise??? I think not!

The OP is only trying to offer some help, give him/her a break!

bijlaard
5th November, 2012, 10:21 AM
hmm , Interesting how people think in this world.

When I had the first 2 lessons , I was happy with the content, I told ARD tuning that more wanabee tuners maybe would like this stuff, so I made this threat and ARD shortend the video for demo purposes. (same date : YES)

I payed the full ammount for this video's and just wanted to share my happines because I could understand them.

So please stop trying to kill me on this forum, I thought that this forum was about sharing, helping and to get help, to learn etc.

Maybe it was stupid of me to share what, in my opinion a lot of beginner tuners just would like to know.

rgds

physyc
5th November, 2012, 01:06 PM
First of all, i don't want to kill no one!
TS is not the seller of the video.

Second, this is not a 650euro worth!
Buy a tuningfile with a map pack and compare it to your ori file.
Is way cheaper.

If you have original winols. there is a team who can help you with your files. called: EVC customer service. real pro's.

After the video, do you know/understand what you are doing? or just you look and copy for that ecu, and next month pay another 650? for another video for another ecu?

ALL the info is available on the internet on websites as checksumm, chiptuners, ecuconnections, etc... FOR FREE

If you have genuine soft and hardware. You have an account for customer service, map packs, damos files, etc...
IF you look on the internet (spec. chiptuning fora) you will find all explenation without spending money.


Third, i want to state that this is a commercial! (not by the TS)

Our budy Lucky who posted the link to the website. IS the owner of the website.
So yes it is a post with the intention to sell his own material to users of this forum.
that makes it advertising.

Is it just LUCKY coincidence that LUCKY here post the link. And that the owner of the website is also known as LUCKY.
or is it just to much LUCK in one sentence...

On the other hand.
Bijlaard (Obbe) works at Paashuis volvo.
Paashuis, has his own rallye team driving a D5.
So "newbie", "wannabee tuners" and other names...
i have my doubts...
He is not the dummy as he pretends to be, he is a respected volvo specialist.


Now, you pointed people to a video link, You are verry happy with. Everyone have to find out for his own, if this kind of info is worth that kind of money.

Lets get back to the orders of the day...

Att 1 Ard details (informal, no advertising purpose ;) )
Att 2 Volvo forum, where ard is known as lucky
Att 3 Group buy ard calls himself Lucky
Att 4 Bijlaard @Paashuis

bijlaard
6th November, 2012, 02:02 AM
@ physyc:
Please redo your research

Bijlaard (Obbe) works at Paashuis volvo.
I (Obbe) don't work @ Paashuis anymore, to be honest I'm unemployed at the moment and trying to find a new way of earning a living hoping to beable to do that in the company of my wife (Ina) and a compagnion of her. www.varioclean.nl (http://www.varioclean.nl)

Paashuis, has his own rallye team driving a D5. Forget about that, he drove 2 or 3 times in the arctic challenge, google on that and you see that is a fun rally for rich people with normal cars.

So "newbie", "wannabee tuners" and other names...
i have my doubts... Well, :-) just check what I wrote above and you are updated. :-)

He is not the dummy as he pretends to be, he is a respected volvo specialist.
YES I know Volvo's and NO I don't know tuning I'm trying to learn (every day) so I can try to make a living. There for I did buy these lessons.

I now noticed that when you post on this forum people who don't like what you post will try to take you down, it's a pitty this happens in this community.

I will take some distance with things I will post in the future ,At this moment it's "good " that I'm unemployed because I now have the time to write here , (defending myself)

I hope some moderater will close this threat.


rgds

ps :Winols I have the original one , bdm stuff I have original, all bought @evc (you can check that to) :-)

rgds

ka-pa-za
6th November, 2012, 10:42 AM
Nice topic...

There is no need to defend yourself i think.
I don't see it as people taking someone down.
One guy flip the card of advertising. Another guy put here why that might be the case. Nothing wrong or is it?

I don't understand why someone would pay +600euro for a video to explain edc16 maps?

I don't understand why a respected tuner would make such a video. Tuners sell tuningfiles with mappacks.

Rica makes the best volvo files i have ever seen. Do you see him making video's? why would he?
however drop him a mail and he will help you...
Rica files are duplicated by many others...
Arent they dutch? Why send your money oversea if you can support your local economy?

In your first post you wrote you have downloaded winols from this forum. Later you wrote you bought winols...
When you have a valid evc customer nr, try to contact evc programmers. they will tell you what maps to use and how. without extra cash.


I don't want to spoil the next videos for you, but with:

$1D172E;"Torque limiter";"25x1"
$1D1ABA;"Torque limiter";"25x1"
$1D45E8;"Smoke limiter by MAF (AFR)";"16x16"
$1D43A4;"Smoke limiter by MAF (AFR)";"16x16"
$1D4160;"Smoke limiter by MAF (AFR)";"16x16"
$1D3F1C;"Smoke limiter by MAF (AFR)";"16x16"
$1D3CD8;"Smoke limiter by MAF (AFR)";"16x16"
$1D3A94;"Smoke limiter by MAF (AFR)";"16x16"
$1D3850;"Smoke limiter by MAF (AFR)";"16x16"
$1D360C;"Smoke limiter by MAF (AFR)";"16x16"
$1D33C8;"Smoke limiter by MAF (AFR)";"16x16"
$1D4AE4;"IQ torque conversations";"20x25"
$1D4F2A;"IQ torque conversations";"20x25"
$1D5370;"IQ torque conversations";"20x25"
$1D57B6;"IQ torque conversations";"20x25"
$1D26D6;"Overheating protection map by Speed km/h";"16x16"
$1D2492;"Overheating protection map by RPM";"16x16"
$1D21DA;"Overheating conversion map temp to km/h";"10x16"
$1D2010;"IQ limitation by low temperatures";"6x25"
$1D1A54;"Torque limiter";"25x1"
$1D19EE;"Torque limiter";"25x1"
$1D1B20;"Torque limiter";"25x1"
$1D14DC;"Friction torque map";"16x16"
$1D1130;"Engine torque limiter";"25x1"
$1D17C6;"Torque limitation by patm";"10x25"
$1D6808;"Torque limitation at gear fail";"15x1"
$1D684A;"Torque limitation at 1 gear";"15x1"
$1D6888;"Torque limitation at 2 gear";"15x1"
$1D68C8;"Torque limitation at 3 gear";"15x1"
$1D6904;"Torque limitation at 4 gear";"15x1"
$1D6942;"Torque limitation at 5 gear";"15x1"
$1D697E;"Torque limitation at 6 gear";"15x1"
$1D69BE;"Torque limitation at reverse gear";"15x1"

You might get some extra power +30hp +80Nm
(Don't forget the speed limiter...)

If you realy want to spend crazy money. please spend it by donating to "make a wish". Or some cancer program.

No one here accept someone selling winols or ecm for 200 euro, but someone makes a video and sell it for +3x more.
No one makes problem?

konopel
6th November, 2012, 03:06 PM
Nice topic...

There is no need to defend yourself i think.
I don't see it as people taking someone down.
One guy flip the card of advertising. Another guy put here why that might be the case. Nothing wrong or is it?

I don't understand why someone would pay +600euro for a video to explain edc16 maps?

I don't understand why a respected tuner would make such a video. Tuners sell tuningfiles with mappacks.

Rica makes the best volvo files i have ever seen. Do you see him making video's? why would he?
however drop him a mail and he will help you...
Rica files are duplicated by many others...
Arent they dutch? Why send your money oversea if you can support your local economy?

In your first post you wrote you have downloaded winols from this forum. Later you wrote you bought winols...
When you have a valid evc customer nr, try to contact evc programmers. they will tell you what maps to use and how. without extra cash.


I don't want to spoil the next videos for you, but with:

$1D172E;"Torque limiter";"25x1"
$1D1ABA;"Torque limiter";"25x1"
$1D45E8;"Smoke limiter by MAF (AFR)";"16x16"
$1D43A4;"Smoke limiter by MAF (AFR)";"16x16"
$1D4160;"Smoke limiter by MAF (AFR)";"16x16"
$1D3F1C;"Smoke limiter by MAF (AFR)";"16x16"
$1D3CD8;"Smoke limiter by MAF (AFR)";"16x16"
$1D3A94;"Smoke limiter by MAF (AFR)";"16x16"
$1D3850;"Smoke limiter by MAF (AFR)";"16x16"
$1D360C;"Smoke limiter by MAF (AFR)";"16x16"
$1D33C8;"Smoke limiter by MAF (AFR)";"16x16"
$1D4AE4;"IQ torque conversations";"20x25"
$1D4F2A;"IQ torque conversations";"20x25"
$1D5370;"IQ torque conversations";"20x25"
$1D57B6;"IQ torque conversations";"20x25"
$1D26D6;"Overheating protection map by Speed km/h";"16x16"
$1D2492;"Overheating protection map by RPM";"16x16"
$1D21DA;"Overheating conversion map temp to km/h";"10x16"
$1D2010;"IQ limitation by low temperatures";"6x25"
$1D1A54;"Torque limiter";"25x1"
$1D19EE;"Torque limiter";"25x1"
$1D1B20;"Torque limiter";"25x1"
$1D14DC;"Friction torque map";"16x16"
$1D1130;"Engine torque limiter";"25x1"
$1D17C6;"Torque limitation by patm";"10x25"
$1D6808;"Torque limitation at gear fail";"15x1"
$1D684A;"Torque limitation at 1 gear";"15x1"
$1D6888;"Torque limitation at 2 gear";"15x1"
$1D68C8;"Torque limitation at 3 gear";"15x1"
$1D6904;"Torque limitation at 4 gear";"15x1"
$1D6942;"Torque limitation at 5 gear";"15x1"
$1D697E;"Torque limitation at 6 gear";"15x1"
$1D69BE;"Torque limitation at reverse gear";"15x1"

You might get some extra power +30hp +80Nm
(Don't forget the speed limiter...)

If you realy want to spend crazy money. please spend it by donating to "make a wish". Or some cancer program.

No one here accept someone selling winols or ecm for 200 euro, but someone makes a video and sell it for +3x more.
No one makes problem?Interesting for what ECU aforementioned maps have been presented. Such maps are not present for EDC16C31 Volvo XC60 2.4 D5.

ka-pa-za
6th November, 2012, 03:35 PM
Interesting for what ECU aforementioned maps have been presented. Such maps are not present for EDC16C31 Volvo XC60 2.4 D5.


My old XC70...

konopel
6th November, 2012, 04:56 PM
My old XC70...I have looked at this file in WinOLS.I have not found many maps there.

Corneliuss
1st February, 2013, 12:54 PM
What You think about group buy??? we need 12 persons with me is 13 so we can bay for 50p xD
I agreed that .... I want to pay 50 p for that .

Corneliuss
1st February, 2013, 01:03 PM
Nice topic...

There is no need to defend yourself i think.
I don't see it as people taking someone down.
One guy flip the card of advertising. Another guy put here why that might be the case. Nothing wrong or is it?

I don't understand why someone would pay +600euro for a video to explain edc16 maps?

I don't understand why a respected tuner would make such a video. Tuners sell tuningfiles with mappacks.

Rica makes the best volvo files i have ever seen. Do you see him making video's? why would he?
however drop him a mail and he will help you...
Rica files are duplicated by many others...
Arent they dutch? Why send your money oversea if you can support your local economy?

In your first post you wrote you have downloaded winols from this forum. Later you wrote you bought winols...
When you have a valid evc customer nr, try to contact evc programmers. they will tell you what maps to use and how. without extra cash.


I don't want to spoil the next videos for you, but with:

$1D172E;"Torque limiter";"25x1"
$1D1ABA;"Torque limiter";"25x1"
$1D45E8;"Smoke limiter by MAF (AFR)";"16x16"
$1D43A4;"Smoke limiter by MAF (AFR)";"16x16"
$1D4160;"Smoke limiter by MAF (AFR)";"16x16"
$1D3F1C;"Smoke limiter by MAF (AFR)";"16x16"
$1D3CD8;"Smoke limiter by MAF (AFR)";"16x16"
$1D3A94;"Smoke limiter by MAF (AFR)";"16x16"
$1D3850;"Smoke limiter by MAF (AFR)";"16x16"
$1D360C;"Smoke limiter by MAF (AFR)";"16x16"
$1D33C8;"Smoke limiter by MAF (AFR)";"16x16"
$1D4AE4;"IQ torque conversations";"20x25"
$1D4F2A;"IQ torque conversations";"20x25"
$1D5370;"IQ torque conversations";"20x25"
$1D57B6;"IQ torque conversations";"20x25"
$1D26D6;"Overheating protection map by Speed km/h";"16x16"
$1D2492;"Overheating protection map by RPM";"16x16"
$1D21DA;"Overheating conversion map temp to km/h";"10x16"
$1D2010;"IQ limitation by low temperatures";"6x25"
$1D1A54;"Torque limiter";"25x1"
$1D19EE;"Torque limiter";"25x1"
$1D1B20;"Torque limiter";"25x1"
$1D14DC;"Friction torque map";"16x16"
$1D1130;"Engine torque limiter";"25x1"
$1D17C6;"Torque limitation by patm";"10x25"
$1D6808;"Torque limitation at gear fail";"15x1"
$1D684A;"Torque limitation at 1 gear";"15x1"
$1D6888;"Torque limitation at 2 gear";"15x1"
$1D68C8;"Torque limitation at 3 gear";"15x1"
$1D6904;"Torque limitation at 4 gear";"15x1"
$1D6942;"Torque limitation at 5 gear";"15x1"
$1D697E;"Torque limitation at 6 gear";"15x1"
$1D69BE;"Torque limitation at reverse gear";"15x1"

You might get some extra power +30hp +80Nm
(Don't forget the speed limiter...)

If you realy want to spend crazy money. please spend it by donating to "make a wish". Or some cancer program.

No one here accept someone selling winols or ecm for 200 euro, but someone makes a video and sell it for +3x more.
No one makes problem?
You are right .
From where can I buy 1 licence of winols ?
Thank You Verry Much .
Best Regards .